DC AXIAL FAN 92x92x25mm FAD1-09225 Series Features: Motor: Brushless DC Motor Protection: Impedance Protected Bearing Type: Two Ball, Sleeve, or Hydro Dynamic Connection: UL 1007 AWG 24, 290mm Wire Leads Frame Material: Plastic UL94V-0 Impeller Material: Plastic UL94V-0 Operating Temp: Two Ball: -10°C~70°C Sleeve: -10°C~60°C Hydro Dynamic: -10°C~70°C Life Expectancy: Two Ball: 70,000 Hours Sleeve: 30,000 Hours Hydro Dynamic: 50,000 Hours Fan-S Division Model No. Volt. Current Power Rated Speed (VDC) (A) (W) (rpm) Maximum AirFlow (CMM) (CFM) Maximum Static Pressure (InAq) (mmAq) Noise Level (dB/A) Weight (g) FAD1-09225C * AW11 12 0.06 0.72 1600 0.858 30.303 0.034 0.887 19.1 92.0 FAD1-09225C * LW11 12 0.10 1.20 2100 1.152 40.689 0.081 2.062 29.2 92.0 FAD1-09225C * MW11 12 0.15 1.80 2400 1.263 44.655 0.101 2.565 31.2 92.0 FAD1-09225C * HW11 FAD1-09225C * JW11 12 0.24 2.88 2900 1.587 56.069 0.146 3.721 37.5 92.0 12 0.28 3.36 3300 1.753 61.929 0.187 4.760 42.2 92.0 FAD1-09225D * LW11 FAD1-09225D * MW11 24 0.05 1.20 2100 1.152 40.689 0.081 2.062 29.2 92.0 24 0.08 1.92 2400 1.263 44.655 0.101 2.565 31.2 92.0 FAD1-09225D * HW11 24 0.15 3.60 2900 1.587 56.069 0.146 3.721 37.5 92.0 * Indicates “B” (Ball Bearing), “S” (Sleeve), or “H” (Hydro Dynamic) Noise is measured at the distance of one (1) meter from the axis of intake. A J ISO-9001 Company Qualtek Electronics Corporation www.qualtekusa.com