Triple Balanced Mixer Model M26T RF 1.0 to 3400 MHz RF Band Electrical Specifications : (1) Conditions Parameter SSB Conversion loss: Isolation LO to RF: (2)(3) 1.0-1500 1.0-3400 1.0-1500 1.0-3400 LO to IF: RF to IF: Input 1-dB Compression Point: Input Third Order Intercept Point: LO Power: (4) Specifications RF (MHz) LO (MHz) IF (MHz) 1.0-1500 1.0-1000 1.0-1500 1.0-3400 1.0-2000 1.0-3400 Min 30 25 30 25 1.0-3400 dB dB dB dB Typical 7.5 dB 8.5 dB 38 35 35 32 30 dB dB dB dB dB 1.0-3400 1.0-3400 1.0-2000 +3 dBm 1.0-3400 1.0-3400 1.0-2000 +15 dBm 1.0-3400 1.0-3400 1.0-2000 +13 dBm Notes: 1. Specifications are guaranteed when tested as a downconverter in a 50 Ohm system at +25˚C with the nominal LO power. Specifications indicated as typical are not guaranteed. 2. Noise figure is nominally within ±0.5 dB of the SSB conversion loss for IF frequencies greater than 10 MHz. 3. Conversion loss typically degrades less than ±0.5 dB at +100˚C and improves less than 0.5 dB at -55˚C. 4. Usable LO drives are up to 2 dB below and 3 dB above nominal. M26T Max 9.5 dB 10.5 dB Typical Performance at 25˚C Outline: A All dimensions are in inches and [mm]. Spectrum Microwave · 2144 Franklin Drive N.E. · Palm Bay, FL 32905 · PH (888) 553-7531 · Fax (888) 553-7532 www.SpectrumMicrowave.com Spectrum Microwave · 2707 Black Lake Place · Philadelphia, PA 19154 · PH (215) 464-4000 · Fax (215) 464-4001 REV A 6/18/09