ILSI I533-7P7-20.000 3.2 mm x 5 mm ceramic package smd tcxo Datasheet

I533/I534/I733/I734 Series
3.2 mm x 5 mm Ceramic Package SMD TCXO
Product Features:
Applications:
Low Jitter, Non-PLL Based Output
Available in Both Clipped Sinewave and
HCMOS Output Levels
Compatible with Leadfree Processing
Server & Storage
Sonet /SDH
802.11 / Wifi
T1/E1, T3/E3
Fibre Channel
5.0
4
3
3.2
Frequency
8.000 Mhz to 40 Mhz
Output Level
Clipped Sinewave
HCMOS
Output Load
Clipped Sinewave
HCMOS
1
0.8 V p-p Min.
‘0’=0.5 VDC Max., ‘1’=0.8Vcc Min.
2
1.5
20K Ohms / 10 pF
15pF
2.6
Duty Cycle (HCMOS)
50% ±10%
Rise / Fall Time
(HCMOS)
Frequency Stability
Vs Temperature
Vs Voltage
Vs Load(5%)
Frequency Tolerance @
25 C
Aging
10 nS Max.
Supply Voltage
See Supply Voltage Table , tolerance  5%
Current
2.0 mA Max. (Clipped Sinewave)
1
2
4
3
1.4
See Frequency Stability Table
 0.3 ppm Max.
.0.2 ppm Max.
 1.0 ppm
4.0
3
4
 1 ppm / Year Max.
1.35
2.5
1
2
1.6
6.0 mA Max. (HCMOS)
Voltage Control
(I733/I734)
Operating
1.5 VDC  1.0 VDC,  5.0 ppm Min.
Storage
-40 C to +85 C
Phase Noise
(typ. @ 20Mhz)
-86 dBc/Hz @ 10 Hz
-115 dBc/Hz @ 100 Hz
-138 dBc/Hz @ 1KHz
-146 dBc/Hz @ 10 Khz
Pin
1
2
3
4
See Operating Temperature Table
Package
I533 (Clipped Sinewave TCXO)
I534 (HCMOS TCXO)
I733 (Clipped Sinewave TCVCXO)
I734 (HCMOS TCVCXO)
Connection
Control Voltage or N.C.
GND
Output
Vcc
Dimension Units: mm
Part Number Guide
Operating Temperature
7 = 0 C to +50 C
Sample Part Number: I537-1Q3-20.000 Mhz
FrequencyStability vs Temperature
Supply Voltage
**N = 1.0 ppm
3 = 3.3 V
1 = 0 C to +70 C
**O = 1.5 ppm
7 = 3.0 V
3 = -20 C to +70 C
**P = 2.0 ppm
2 = 2.7 V
2 = -40 C to +85 C
Q = 2.5 ppm
R = 3.0 ppm
J = 5.0 ppm
NOTE: A 0.01 µF bypass capacitor is recommended between Vcc (pin 4) and GND (pin 2) to minimize power supply noise.
** Not available for all temperature ranges.
ILSI America Phone: 775-851-8880 • Fax: 775-851-8882• e-mail: [email protected] • www.ilsiamerica.com
12/20/11_D
Specifications subject to change without notice
Page 1
Frequency
- 20.000 MHz
I533/I534/I733/I734 Series
3.2 mm x 5 mm Ceramic Package SMD TCXO
Pb Free Solder Reflow Profile:
Typical Application:
*Units are backward compatible with 240C reflow processes
Package Information:
MSL = N.A. (package does not contain plastic, storage life is
unlimited under normal room conditions).
Termination = e4 (Au over Ni over W base metalization).
Tape and Reel Information:
Quantity per
Reel
A
B
C
D
E
F
1000
8 +/-.3
4 +/-.2
3.5 +/-.2
9 +/-1 or 12 +/-3
60 / 80
180
Environmental Specifications
Thermal Shock
Moisture Resistance
Mechanical Shock
Mechanical Vibration
Resistance to Soldering Heat
Hazardous Substance
Solderability
Terminal Strength
Gross Leak
Fine Leak
Solvent Resistance
MIL-STD-883, Method 1011, Condition A
MIL-STD-883, Method 1004
MIL-STD-883, Method 2002, Condition B
MIL-STD-883, Method 2007, Condition A
J-STD-020C, Table 5-2 Pb-free devices (except 2 cycles max)
Pb-Free / RoHS / Green Compliant
JESD22-B102-D Method 2 (Preconditioning E)
MIL-STD-883, Method 2004, Test Condition D
MIL-STD-883, Method 1014, Condition C
MIL-STD-883, Method 1014, Condition A2, R1=2x10-8 atm cc/s
MIL-STD-202, Method 215
Marking
Line 1: I - Date Code (YWW)
Line 2: Frequency
ILSI America Phone: 775-851-8880 • Fax: 775-851-8882• e-mail: [email protected] • www.ilsiamerica.com
12/20/11_D
Specifications subject to change without notice
Page 2
Similar pages