NVC3S5A51PLZ Advance Information Power MOSFET 60V, 250mΩ, 1.8A, P-Channel Automotive Power MOSFET designed to minimize gate charge and low on resistance. AEC-Q101 qualified MOSFET and PPAP capable suitable for automotive applications. Features 4V drive High ESD protection Low On-Resistance AEC-Q101 qualified and PPAP capable Pb-Free, Halogen Free and RoHS compliance www.onsemi.com VDSS RDS(on) Max 250mΩ@ 10V ID Max 60V 330mΩ@ 4.5V 1.8A 350mΩ@ 4.0V ELECTRICAL CONNECTION P-Channel Typical Applications Reverse Battery Protection High Side Load Switch Automotive Body Controllers 3 SPECIFICATIONS ABSOLUTE MAXIMUM RATING at Ta = 25C (Note 1) 1 Parameter Symbol Value Unit VDSS Drain to Source Voltage V 60 VGSS Gate to Source Voltage V 20 Drain Current (DC) (Note 2) A 1.8 ID Drain Current (DC) (Note 3) A 1.7 Drain Current (Pulse) IDP A 7.2 PW 10s, duty cycle 1% Power Dissipation 1.2 W Ta=25C(Note 2) PD Power Dissipation 0.8 W Ta=25C(Note 3) Junction Temperature and Tj, Tstg 55 to +175 C Storage Temperature Note 1 : Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1 : Gate 2 : Source 3 : Drain 2 MARKING 3 1 2 CPH3 ORDERING INFORMATION See detailed ordering and shipping information on page 6 of this data sheet. THERMAL RESISTANCE RATINGS Parameter Symbol Value (Note 2) Unit 125 C/W 182 C/W RJA Junction to Ambient (Note 3) Note 2 : Surface mounted on ceramic substrate(900mm2 0.8mm). Note 3 : Surface mounted on FR4 board using a 92mm2, 1 oz. Cu pad. This document contains information on a new product. Specifications and information herein are subject to change without notice. © Semiconductor Components Industries, LLC, 2015 December 2015 - Rev. P1 1 Publication Order Number : NVC3S5A51PLZ/D NVC3S5A51PLZ ELECTRICAL CHARACTERISTICS at Ta 25C (Note 4) Symbol Drain to Source Breakdown Voltage V(BR)DSS IDSS ID=1mA, VGS=0V Zero-Gate Voltage Drain Current VDS=60V, VGS=0V 1 A Gate to Source Leakage Current IGSS VGS=16V, VDS=0V 10 A Gate Threshold Voltage VGS(th) VDS=10V, ID=1mA 2.6 V Forward Transconductance gFS VDS=10V, ID=1A 2.7 ID=1A, VGS=10V 190 250 m ID=0.5A, VGS=4.5V 235 330 m ID=0.5A, VGS=4V 250 350 m Static Drain to Source On-State Resistance RDS(on) Input Capacitance Ciss Conditions Value Parameter min typ 60 Unit V 1.2 262 VDS=20V, f=1MHz max S pF Output Capacitance Coss Reverse Transfer Capacitance Crss Turn-ON Delay Time td(on) 5.1 ns Rise Time tr 5.4 ns Turn-OFF Delay Time td(off) 34 ns Fall Time tf 19 ns Total Gate Charge Qg 6.0 nC Gate to Source Charge Qgs Gate to Drain “Miller” Charge Qgd See Fig.1 VDS=30V, VGS=10V, ID=1.8A 29 pF 19 pF 0.83 nC 1.3 nC VSD IS=1.8A, VGS=0V Forward Diode Voltage V 0.82 1.2 Note 4 : Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. Fig.1 Switching Time Test Circuit www.onsemi.com 2 NVC3S5A51PLZ www.onsemi.com 3 NVC3S5A51PLZ www.onsemi.com 4 NVC3S5A51PLZ PACKAGE DIMENSIONS unit : mm CPH3 CASE 318BA ISSUE O RECOMMENDED SOLDERING FOOTPRINT 2.4 1.4 0.6 1 : Gate 2 : Source 3 : Drain 0.95 www.onsemi.com 5 0.95 NVC3S5A51PLZ ORDERING INFORMATION Device NVC3S5A51PLZT1G Marking Package Shipping (Qty / Packing) WH CPH3 (Pb-Free / Halogen Free) 3,000 / Tape & Reel † For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. http://www.onsemi.com/pub_link/Collateral/BRD8011-D.PDF Note on usage : Since the NVC3S5A51PLZ is a MOSFET product, please avoid using this device in the vicinity of highly charged objects. ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries. SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf . SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. www.onsemi.com 6