Online data sheet PSD01-2501, M40Z-025000TR0 M4000 Standard A/P MULTIPLE LIGHT BEAM SAFETY DEVICES PSD01-2501, M40Z-025000TR0 | M4000 Standard A/P MULTIPLE LIGHT BEAM SAFETY DEVICES A B C D E F Ordering information System part Type Part no. Deflector unit PSD01-2501 1027907 M40Z-025000TR0 1200122 Sender/receiver in one housing Other models and accessories www.sick.com/M4000_Standard_A_P Detailed technical data Features H I J K L M N O P Q R S T Scanning range 0.5 m ... 4.5 m Number of beams 2 Beam separation 500 mm Response time 10 ms Synchronization Optical synchronisation Safety-related parameters Type Type 4 (IEC 61496) Safety integrity level SIL3 (IEC 61508) SILCL3 (EN 62061) Category Category 4 (EN ISO 13849) Performance level PL e (EN ISO 13849) PFHD (mean probability of a dangerous failure per hour) 6.6 x 10-9 (EN ISO 13849) TM (mission time) 20 years (EN ISO 13849) Safe state in the event of a fault At least one OSSD is in the OFF state. Functions Functions Delivery status Restart interlock ✔ Internal External device monitoring (EDM) ✔ Activated Beam coding ✔ Uncoded Configurable application diagnostic output ✔ Contamination (OWS) Interfaces System connection Connection type Male connector M12, 8-pin 1) 2) 2 Depending on load, power supply and wire cross-section. The technical specifications must be observed. For additional information on Flexi Soft -> www.sick.com/Flexi_Soft. OPTO-ELECTRONIC PROTECTIVE DEVICES | SICK Online data sheet | 2017-08-24 18:11:25 Subject to change without notice PSD01-2501, M40Z-025000TR0 | M4000 Standard A/P MULTIPLE LIGHT BEAM SAFETY DEVICES Permitted cable length ≤ 15 m 1) Permitted cross-section ≥ 0.25 mm² Configuration method Configuration buttons Display elements LEDs 7-segment display Fieldbus, industrial network Integration via Flexi Soft safety controller CANopen, DeviceNet™, EtherCAT®, EtherNet/IP™, Modbus TCP, PROFIBUS DP, PROFINET 2) 1) 2) Depending on load, power supply and wire cross-section. The technical specifications must be observed. For additional information on Flexi Soft -> www.sick.com/Flexi_Soft. Electrical data Protection class III (EN 50178) Supply voltage VS 24 V DC (19.2 V DC ... 28.8 V DC) 1) Residual ripple ≤ 10 % 2) Power consumption ≤ 0.6 A 3) Safety outputs (OSSD) Type of output 2 PNP semiconductors, short-circuit protected, cross-circuit monitored 4) Switching voltage HIGH 24 V DC (VS – 2.25 V DC ... VS) Switching voltage LOW ≤ 2 V DC Switching current ≤ 500 mA Diagnostic outputs Type of output PNP semiconductor, short-circuit protected Switching voltage HIGH 24 V DC (VS – 4.2 V DC ... VS) Switching voltage LOW High resistance Switching current ≤ 100 mA 1) The external voltage supply must be capable of buffering brief mains voltage failures of 20 ms as specified in EN 60204-1. Suitable power supplies are available as accessories from SICK. 2) 3) 4) Within the limits of VS. Without load. Applies to the voltage range between –30 V and +30 V. Mechanical data Housing cross-section 52 mm x 55.5 mm Housing material Aluminum alloy ALMGSI 0.5 Surface treatment Powder coated Front screen material Polycarbonate, scratch-resistant coating Ambient data Enclosure rating IP65 (EN 60529) Ambient operating temperature –30 °C ... +55 °C Storage temperature –30 °C ... +70 °C Air humidity 15 % ... 95 %, Non-condensing Vibration resistance 5 g, 10 Hz ... 55 Hz (IEC 60068-2-6) Shock resistance 10 g, 16 ms (IEC 60068-2-29) 2017-08-24 18:11:25 | Online data sheet Subject to change without notice OPTO-ELECTRONIC PROTECTIVE DEVICES | SICK 3 PSD01-2501, M40Z-025000TR0 | M4000 Standard A/P MULTIPLE LIGHT BEAM SAFETY DEVICES A B C D E F H I J K L M N O P Q R S T Other information Wave length 850 nm Classifications ECl@ss 5.0 27272703 ECl@ss 5.1.4 27272703 ECl@ss 6.0 27272703 ECl@ss 6.2 27272703 ECl@ss 7.0 27272703 ECl@ss 8.0 27272703 ECl@ss 8.1 27272703 ECl@ss 9.0 27272703 ETIM 5.0 EC001832 ETIM 6.0 EC001832 UNSPSC 16.0901 46171620 4 OPTO-ELECTRONIC PROTECTIVE DEVICES | SICK Online data sheet | 2017-08-24 18:11:25 Subject to change without notice PSD01-2501, M40Z-025000TR0 | M4000 Standard A/P MULTIPLE LIGHT BEAM SAFETY DEVICES Dimensional drawing (Dimensions in mm (inch)) Deflector units for M4000 Standard A/P (0.55) (2.19) 2.2 (0.09) 72.3 (2.85) 1 (0.24) 3.5 (1.08) (0.14) 6 (0.04) 27.5 (2.05) (2.05) 14 55.5 52 52 10.5 (0.41) S1 2017-08-24 18:11:25 | Online data sheet Subject to change without notice 14.5 M4000 Passive (mirror deflection) (0.57) 14.5 (0.57) 91.7 (3.61) 91.7 (3.61) S1 L2 L1 L2 L1 S1 S1 Sliding nut groove for side mounting M4000 Passive (fiber-optic deflection) OPTO-ELECTRONIC PROTECTIVE DEVICES | SICK 5 PSD01-2501, M40Z-025000TR0 | M4000 Standard A/P 25 55.5 (2.19) 27.5 52 (2.05) >20 (0.79) (1.08) 1 S1 2 Optional (receiver only): Design with integrated LED Laser warning label (receiver with integrated alignment aid only) 2 1 L2 L1 Mounting ranges for the brackets Laser output opening (receiver with integrated alignment aid only) 14 (0.55) 3.5 1 (0.09) 2.2 13 Sliding nut groove for side mounting (0.51) >20 (0.79) 12.5 23.5 (0.93) (0.49) 71.2 (2.80) 99.8 (3.93) S1 14.4 (0.57) 10.5 (0.41) Cable socket M12 angled (only with AS-Interface: aligned) 6 AS-Interface clip M12 (aligned) 47.5 (1.87) (1.97) Ca. 83 (3.27) (connector range) 50 (1.30) (1.22) Ca. 43 (1.69) (connector range) 33 90° Ca. 47 (1.85) (connector range) 31 H I J K L M N O P Q R S T 2 1 (0.14) 6 (0.24) (0.04) A B C D E F (0.98) MULTIPLE LIGHT BEAM SAFETY DEVICES Cable socket M12 with cable (left) and cable plug M12 with cable (right, optional, only on receiver) Number of beams Beam separation S1 L1 L2 2 500 (19.69) 635 (25.00) 664 (26.14) 4 300 (11.81) 1,035 (40.75) 1,064 (41.89) OPTO-ELECTRONIC PROTECTIVE DEVICES | SICK Online data sheet | 2017-08-24 18:11:25 Subject to change without notice PSD01-2501, M40Z-025000TR0 | M4000 Standard A/P MULTIPLE LIGHT BEAM SAFETY DEVICES Recommended accessories Other models and accessories www.sick.com/M4000_Standard_A_P Brief description Type Part no. BEF-3WNGBAST4 7021352 4 pieces, Mounting kit 6, side bracket, rotatable, Zinc diecast BEF-1SHABAZN4 2019506 4 pieces, Mounting kit 12, rotatable, swivel mount BEF-2SMGEAKU4 2030510 AR60 1015741 AR60 adapter, M4000 4040006 Mounting brackets and plates 4 pieces, Mounting kit 1, mounting bracket, rigid, L-shaped, including fixing screws and washers Terminal and alignment brackets Alignment aids Laser alignment aid for various sensors, laser class 2 (IEC 60825). Do not look into the beam! Adapter AR60 for M4000 and M4000 Curtain 2017-08-24 18:11:25 | Online data sheet Subject to change without notice OPTO-ELECTRONIC PROTECTIVE DEVICES | SICK 7 Online data sheet SICK at a glance SICK is one of the leading manufacturers of intelligent sensors and sensor solutions for industrial applications. A unique range of products and services creates the perfect basis for controlling processes securely and efficiently, protecting individuals from accidents and preventing damage to the environment. We have extensive experience in a wide range of industries and understand their processes and requirements. With intelligent sensors, we can deliver exactly what our customers need. In application centers in Europe, Asia and North America, system solutions are tested and optimized in accordance with customer specifications. All this makes us a reliable supplier and development partner. Comprehensive services complete our offering: SICK LifeTime Services provide support throughout the machine life cycle and ensure safety and productivity. For us, that is “Sensor Intelligence.” Worldwide presence: Contacts and other locations – www.sick.com SICK AG | Waldkirch | Germany | www.sick.com