ON MUR1515 Switchmode power rectifier Datasheet

MUR1510, MUR1515,
MUR1520, MUR1540,
MUR1560
Preferred Devices
SWITCHMODE
Power Rectifiers
http://onsemi.com
. . . designed for use in switching power supplies, inverters and as
free wheeling diodes, these state–of–the–art devices have the
following features:
•
•
•
•
•
•
•
ULTRAFAST
RECTIFIERS
15 AMPERES
100–600 VOLTS
Ultrafast 35 and 60 Nanosecond Recovery Time
175°C Operating Junction Temperature
Popular TO–220 Package
High Voltage Capability to 600 Volts
Low Forward Drop
Low Leakage Specified @ 150°C Case Temperature
Current Derating Specified @ Both Case and Ambient Temperatures
1
4
3
Mechanical Characteristics:
• Case: Epoxy, Molded
• Weight: 1.9 grams (approximately)
• Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
4
• Lead Temperature for Soldering Purposes: 260°C Max. for
•
•
MARKING DIAGRAM
10 Seconds
Shipped 50 units per plastic tube
Marking: U1510, U1515, U1520, U1540, U1560
U15xx
MAXIMUM RATINGS
1
Please See the Table on the Following Page
3
TO–220AC
CASE 221B
PLASTIC
U15xx = Device Code
xx
= 10, 15, 20,
= 40 or 60
ORDERING INFORMATION
Device
Package
Shipping
MUR1510
TO–220
50 Units/Rail
MUR1515
TO–220
50 Units/Rail
MUR1520
TO–220
50 Units/Rail
MUR1540
TO–220
50 Units/Rail
MUR1560
TO–220
50 Units/Rail
Preferred devices are recommended choices for future use
and best overall value.
 Semiconductor Components Industries, LLC, 2000
October, 2000 – Rev. 2
1
Publication Order Number:
MUR1520/D
MUR1510, MUR1515, MUR1520, MUR1540, MUR1560
MAXIMUM RATINGS
MUR
Symbol
1510
1515
1520
1540
1560
Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VR
100
150
200
400
600
Volts
Average Rectified Forward Current
(Rated VR)
IF(AV)
15
@ TC = 150°C
15
@ TC = 145°C
Amps
Peak Rectified Forward Current
(Rated VR, Square Wave, 20 kHz)
IFRM
30
@ TC = 150°C
30
@ TC = 145°C
Amps
Nonrepetitive Peak Surge Current (Surge applied at
rated load conditions halfwave, single phase, 60 Hz)
IFSM
200
150
Amps
Rating
Operating Junction Temperature and
Storage Temperature Range
TJ, Tstg
–65 to +175
°C
RθJC
1.5
°C/W
THERMAL CHARACTERISTICS
Maximum Thermal Resistance, Junction to Case
ELECTRICAL CHARACTERISTICS
Maximum Instantaneous Forward Voltage (Note 1.)
(iF = 15 Amps, TC = 150°C)
(iF = 15 Amps, TC = 25°C)
vF
Maximum Instantaneous Reverse Current (Note 1.)
(Rated dc Voltage, TC = 150°C)
(Rated dc Voltage, TC = 25°C)
iR
Maximum Reverse Recovery Time
(IF = 1.0 Amp, di/dt = 50 Amps/µs)
trr
Volts
0.85
1.05
1.12
1.25
1.20
1.50
500
10
500
10
1000
10
µA
35
1. Pulse Test: Pulse Width = 300 µs, Duty Cycle ≤ 2.0%.
http://onsemi.com
2
60
ns
MUR1510, MUR1515, MUR1520, MUR1540, MUR1560
MUR1510, MUR1515, MUR1520
100
TJ = 150°C
70
100°C
25°C
50
30
TJ = 150°C
20
10
100°C
5
2
1
0.5
25°C
0.2
0.1
0.02
0.01
7.0
0
20
40
5.0
60
80
100
120
160
140
180 200
VR, REVERSE VOLTAGE (VOLTS)
Figure 2. Typical Reverse Current
3.0
2.0
1.0
0.7
0.5
0.3
0.2
0.1
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
10
Square Wave
8.0
6.0
4.0
Rated Voltage Applied
2.0
0
140
160
150
dc
Square Wave
RJA = 16°C/W As Obtained
From A Small TO-220
Heat Sink
dc
Square Wave
RJA = 60°C/W
2.0
As Obtained in Free Air, No Heat Sink
0
0
20
80 100 120
40
60
140
160
180
200
16
180
170
Figure 3. Current Derating, Case
6.0
4.0
dc
12
Figure 1. Typical Forward Voltage
10
8.0
14
TC, CASE TEMPERATURE (°C)
14
12
16
vF, INSTANTANEOUS VOLTAGE (VOLTS)
PF(AV) , AVERAGE POWER DISSIPATION (WATTS)
IF(AV) , AVERAGE FORWARD CURRENT (AMPS)
50
0.05
10
IF(AV) , AVERAGE FORWARD CURRENT (AMPS)
i F , INSTANTANEOUS FORWARD CURRENT (AMPS)
20
IR, REVERSE CURRENT ( A)
100
I
(Resistive Load) PK = π
IAV
14
I
(Capacitive Load) PK =5.0
IAV
12
10
dc
10
8.0
20
6.0
Square Wave
4.0
TJ = 125°C
2.0
0
0
2.0
4.0
6.0
8.0
10
12
14
TA, AMBIENT TEMPERATURE (°C)
IF(AV), AVERAGE FORWARD CURRENT (AMPS)
Figure 4. Current Derating, Ambient
Figure 5. Power Dissipation
http://onsemi.com
3
16
MUR1510, MUR1515, MUR1520, MUR1540, MUR1560
MUR1540
100
100
IR, REVERSE CURRENT ( A)
50
100°C
TJ = 150°C
30
25°C
10
20
10
100°C
5
25°C
2
1
0.5
0.2
0.1
0.05
0.02
0.01
7.0
0
50
100
5.0
150
200
250
300
400
350
450 500
VR, REVERSE VOLTAGE (VOLTS)
Figure 7. Typical Reverse Current
3.0
2.0
IF(AV) , AVERAGE FORWARD CURRENT (AMPS)
i F , INSTANTANEOUS FORWARD CURRENT (AMPS)
20
1.0
0.7
0.5
0.3
0.2
0.1
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
dc
RJA = 16°C/W As Obtained
From A Small TO-220
Heat Sink
8.0 Square Wave
6.0
4.0
dc
Square Wave
RJA = 60°C/W
As Obtained in Free Air, No Heat Sink
20
10
Square Wave
8.0
6.0
4.0
Rated Voltage Applied
2.0
0
140
150
160
40
60
80
100
120
140
160
180
200
16
(Resistive Load)
14
IPK
=π
IAV
dc
I
(Capacitive Load) PK =5.0
IAV
12
180
170
Figure 8. Current Derating, Case
10
0
dc
12
Figure 6. Typical Forward Voltage
12
0
14
TC, CASE TEMPERATURE (°C)
14
2.0
16
vF, INSTANTANEOUS VOLTAGE (VOLTS)
PF(AV) , AVERAGE POWER DISSIPATION (WATTS)
IF(AV) , AVERAGE FORWARD CURRENT (AMPS)
TJ = 150°C
50
70
10
10
Square Wave
20
8.0
6.0
TJ = 125°C
4.0
2.0
0
0
2.0
4.0
6.0
8.0
10
12
14
TA, AMBIENT TEMPERATURE (°C)
IF(AV), AVERAGE FORWARD CURRENT (AMPS)
Figure 9. Current Derating, Ambient
Figure 10. Power Dissipation
http://onsemi.com
4
16
MUR1510, MUR1515, MUR1520, MUR1540, MUR1560
MUR1560
200
100
100
IR, REVERSE CURRENT ( A)
70
50
TJ = 150°C
30
100°C
25°C
10
100°C
5
2
1
0.5
25°C
0.2
0.1
0.02
150
200
250
5.0
300
350
400
450
500
600 650
550
VR, REVERSE VOLTAGE (VOLTS)
Figure 12. Typical Reverse Current
3.0
2.0
1.0
0.7
0.5
0.3
0.2
0.2
0.4
0.6
1.2
1.4
1.6
dc
12
Square Wave
10
8.0
6.0
4.0
Rated Voltage Applied
2.0
0
140
150
160
Figure 13. Current Derating, Case
dc
RJA = 16°C/W As Obtained
From A Small TO-220
Heat Sink
Square Wave
5.0
dc
3.0
Square Wave
RJA = 60°C/W
1.0
As Obtained in Free Air, No Heat Sink
0
0
20
40
60
80 100 120
2.0
140
160
180
200
16
180
170
Figure 11. Typical Forward Voltage
6.0
4.0
14
TC, CASE TEMPERATURE (°C)
9.0
7.0
1.0
16
vF, INSTANTANEOUS VOLTAGE (VOLTS)
10
8.0
0.8
PF(AV) , AVERAGE POWER DISSIPATION (WATTS)
0.1
IF(AV) , AVERAGE FORWARD CURRENT (AMPS)
20
10
0.05
7.0
IF(AV) , AVERAGE FORWARD CURRENT (AMPS)
i F , INSTANTANEOUS FORWARD CURRENT (AMPS)
20
TJ = 150°C
50
I
(Capacitive Load) PK =5.0
IAV
14
dc
10
12
20
10
Square Wave
8.0
I
(Resistive-Inductive Load) PK = π
IAV
6.0
4.0
TJ = 125°C
2.0
0
0
2.0
4.0
6.0
8.0
10
12
14
TA, AMBIENT TEMPERATURE (°C)
IF(AV), AVERAGE FORWARD CURRENT (AMPS)
Figure 14. Current Derating, Ambient
Figure 15. Power Dissipation
http://onsemi.com
5
16
1.0
D = 0.5
0.5
0.2
0.1
0.1
0.05
0.01
0.05
t1
SINGLE PULSE
0.02
0.01
0.01
ZθJC(t) = r(t) RθJC
RθJC = 1.5°C/W MAX
D CURVES APPLY FOR POWER
PULSE TRAIN SHOWN
READ TIME AT T1
TJ(pk) - TC = P(pk) ZθJC(t)
P(pk)
t2
DUTY CYCLE, D = t1/t2
0.02
0.05
0.1
0.2
0.5
1.0
2.0
5.0
10
20
50
t, TIME (ms)
Figure 16. Thermal Response
1000
500
C, CAPACITANCE (pF)
r(t), TRANSIENT THERMAL RESISTANCE (NORMALIZED)
MUR1510, MUR1515, MUR1520, MUR1540, MUR1560
TJ = 25°C
200
100
50
20
10
1.0
2.0
5.0
20
10
VR, REVERSE VOLTAGE (VOLTS)
Figure 17. Typical Capacitance
http://onsemi.com
6
50
100
100
200
500
1000
MUR1510, MUR1515, MUR1520, MUR1540, MUR1560
PACKAGE DIMENSIONS
TO–220 TWO–LEAD
CASE 221B–04
ISSUE D
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
C
B
Q
F
S
T
DIM
A
B
C
D
F
G
H
J
K
L
Q
R
S
T
U
4
A
1
U
3
H
K
L
R
D
G
J
http://onsemi.com
7
INCHES
MIN
MAX
0.595
0.620
0.380
0.405
0.160
0.190
0.025
0.035
0.142
0.147
0.190
0.210
0.110
0.130
0.018
0.025
0.500
0.562
0.045
0.060
0.100
0.120
0.080
0.110
0.045
0.055
0.235
0.255
0.000
0.050
MILLIMETERS
MIN
MAX
15.11
15.75
9.65
10.29
4.06
4.82
0.64
0.89
3.61
3.73
4.83
5.33
2.79
3.30
0.46
0.64
12.70
14.27
1.14
1.52
2.54
3.04
2.04
2.79
1.14
1.39
5.97
6.48
0.000
1.27
MUR1510, MUR1515, MUR1520, MUR1540, MUR1560
SWITCHMODE is a trademark of Semiconductor Components Industries, LLC.
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes
without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular
purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability,
including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be
validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others.
SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or
death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold
SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable
attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim
alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer.
PUBLICATION ORDERING INFORMATION
NORTH AMERICA Literature Fulfillment:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303–675–2175 or 800–344–3860 Toll Free USA/Canada
Fax: 303–675–2176 or 800–344–3867 Toll Free USA/Canada
Email: [email protected]
Fax Response Line: 303–675–2167 or 800–344–3810 Toll Free USA/Canada
N. American Technical Support: 800–282–9855 Toll Free USA/Canada
EUROPE: LDC for ON Semiconductor – European Support
German Phone: (+1) 303–308–7140 (Mon–Fri 2:30pm to 7:00pm CET)
Email: ONlit–[email protected]
French Phone: (+1) 303–308–7141 (Mon–Fri 2:00pm to 7:00pm CET)
Email: ONlit–[email protected]
English Phone: (+1) 303–308–7142 (Mon–Fri 12:00pm to 5:00pm GMT)
Email: [email protected]
CENTRAL/SOUTH AMERICA:
Spanish Phone: 303–308–7143 (Mon–Fri 8:00am to 5:00pm MST)
Email: ONlit–[email protected]
Toll–Free from Mexico: Dial 01–800–288–2872 for Access –
then Dial 866–297–9322
ASIA/PACIFIC: LDC for ON Semiconductor – Asia Support
Phone: 303–675–2121 (Tue–Fri 9:00am to 1:00pm, Hong Kong Time)
Toll Free from Hong Kong & Singapore:
001–800–4422–3781
Email: ONlit–[email protected]
JAPAN: ON Semiconductor, Japan Customer Focus Center
4–32–1 Nishi–Gotanda, Shinagawa–ku, Tokyo, Japan 141–0031
Phone: 81–3–5740–2700
Email: [email protected]
ON Semiconductor Website: http://onsemi.com
EUROPEAN TOLL–FREE ACCESS*: 00–800–4422–3781
*Available from Germany, France, Italy, UK, Ireland
For additional information, please contact your local
Sales Representative.
http://onsemi.com
8
MUR1520/D
Similar pages