UNISONIC TECHNOLOGIES CO., LTD M2115 LINEAR INTEGRATED CIRCUIT DUAL OPERATIONAL AMPLIFIER DESCRIPTION The UTC M2115 is a low operating Voltage(±1.0V min.) and low saturation output voltage(±2.0V p-p at supply voltage ±2.5V) operational amplifier. It is applicable to handy type CD,radio cassete CD, and portable DAT, that are digital audio apparatus which require the 5V single supply operation and high output voltage. The UTC M2115 is improved version of the UTC M2100 about BIAS-CIRCUIT. So the UTC M2115 is low saturation compared to the UTC M2100 under the condition of low supply voltage(<±2.5V).The UTC M2115 is stable about the oscillation compared to the UTC M2100 under the condition of V+/V- >2.5V. FEATURES * Operating Voltage: ±1V ~±7V * Low Saturation Output Voltage: ±2.0Vp-p@V+=±2.5V * Slew Rate: 4V/μs (typ.) * Unity Gain Bandwidth: 12MHz (typ.) ORDERING INFORMATION Ordering Number Lead Free Halogen Free M2115L-D08-T M2115G-D08-T M2115L-S08-R M2115G-S08-R M2115L-S08-T M2115G-S08-T M2115L-P08-R M2115G-P08-R M2115L-P08-T M2115G-P08-T M2115L-D08-T Package Packing DIP-8 SOP-8 SOP-8 TSSOP-8 TSSOP-8 Tube Tape Reel Tube Tape Reel Tube (1)Packing Type (1) R: Tape Reel, T: Tube (2)Package Type (2) D08: DIP-8, S08: SOP-8, P08:TSSOP-8 (3)Lead Free (3) G: Halogen Free, L: Lead Free www.unisonic.com.tw Copyright © 2011 Unisonic Technologies Co., LTD 1 of 3 QW-R105-021,Ba M2115 LINEAR INTEGRATED CIRCUIT PIN CONFIGURATION EQUIVALENT CIRCUIT (1/2 Shown) V- - INPUT + INPUT OUTPUT V+ UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 3 QW-R105-021,Ba M2115 LINEAR INTEGRATED CIRCUIT ABSOLUTE MAXIMUM RATINGS (TA=25°C, unless otherwise specified) PARAMETER Supply Voltage Differential Input Voltage RATINGS ±7.0 ±14 DIP-8 500 Power Dissipation SOP-8 PD 300 TSSOP-8 250 Operating Temperature TOPR -40 ~ +85 Storage Temperature TSTG -40 ~ +125 Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. SYMBOL V+/VVI(DIFF) UNIT V V mW °C °C ELECTRICAL CHARACTERISTICS (V+/V- =±2.5V, TA=25°C, unless otherwise specified) PARAMETER SYMBOL TEST CONDITION MIN TYP MAX UNIT Input Offset Voltage VI(OFF) Rs≤10kΩ 1 6 mV Input Bias Current II(BIAS) 100 300 nA Operating Current ICC VIN=0,RL=∞ 3.5 5 mA Maximum Output Voltage Swing VOM RL≥2.5kΩ ±2 ±2.2 V Input Common Mode Voltage Range VICM ±1.5 V Large Signal Voltage Gain GV RL≥10kΩ 60 80 dB Common Mode Rejection Ratio CMRR 60 74 dB Supply Voltage Rejection Ratio SVR 60 80 dB Slew Rate SR VIN=±1V, GV=1 4 V/μs Gain Bandwidth product GB f=10kHz 12 MHz Notes: 1. Applied circuit voltage gain is desired to be operated within the range of 3dB to 30dB. 2. Special care being required for input common mode voltage range and the oscillation due to the capacitive load when operating follower. UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R105-021,Ba