EC27 Series EC27 • RoHS Compliant (Pb-Free) • LVHCMOS output • 2.5V Supply Voltage • Ceramic SMD package • Stability to ±20ppm • Standby Function • Available on Tape and Reel H 1.6 L 7.0 W 5.0 OSCILLATOR ELECTRICAL SPECIFICATIONS Frequency Range (FO) Operating Temperature Range (OTR) Storage Temperature Range (STR) Supply Voltage (VDD) Input Current (IDD) Frequency Tolerance/Stability Output Voltage Logic High (VOH) Output Voltage Logic Low (VOL) Rise Time / Fall Time (TR/TF) Duty Cycle (SYM) Load Drive Capability (CLOAD) Tri-State Input Voltage Standby Current Aging (at 25°C) Start Up Time (TS) RMS Phase Jitter 1.544MHz to 125.000MHz, 125.009MHz, 125.00937MHz, 125.010MHz, 127.000MHz, 128.000MHz, 130.000MHz, 132.000MHz, 133.000MHz, 133.333MHz, 137.472MHz, 142.850MHz, and 150.000MHz 0°C to 70°C or -40°C to 85°C -55°C to 125°C 2.5VDC ±5% 1.544MHz to 9.999MHz 3mA Maximum 10.000MHz to 24.999MHz 5mA Maximum 25.000MHz to 34.999MHz 8mA Maximum 35.000MHz to 49.999MHz 15mA Maximum 50.000MHz to 69.999MHz 20mA Maximum 70.000MHz to 110.000MHz 25mA Maximum 110.001MHz to 125.000MHz 35mA Maximum 125.001MHz to 150.000MHz 45mA Maximum Inclusive of all conditions: Calibration Tolerance at 25°C, ±100ppm, ±50ppm, ±25ppm, Frequency Stability over the Operating Temperature Range, or ±20ppm Supply Voltage Change, Output Load Change, First Year Aging at 25°C, Shock, and Vibration 90% of VDD Minimum IOH=-8mA 10% of VDD Maximum IOL=+8mA 20% to 80% of Waveform, 1.544MHz to 24MHz 6 nSeconds Maximum 20% to 80% of Waveform, 24.001MHz to 110MHz 4 nSeconds Maximum 20% to 80% of Waveform, 110.001MHz to 150MHz 2 nSeconds Maximum 50% of Waveform 50 ±10(%) (Standard) 50% of Waveform (at 25°C, at Vdd=2.5Vdc over >125MHz) 50 ±5(%) (Optional) 15pF HCMOS Load Maximum No Connection Enables Output VIH: >90% of VDD Enables Output Disables Output: High Impedance VIL: <10% of VDD 10µA Maximum Disabled Output: High Impedance ±5ppm /year Maximum 10 mSeconds Maximum 1pSeconds Maximum 12kHz to 20MHz offset frequency MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR EC27 CERAMIC 2.5V OS52 11/06 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. PART NUMBERING GUIDE EC27 00 ET T TS - 30.000M TR PACKAGING OPTIONS Blank=Bulk (Standard) TR=Tape and Reel FREQUENCY TOLERANCE / STABILITY 00=±100ppm Maximum (Standard) 45=±50ppm Maximum, 25=±25ppm Maximum 20=±20ppm Maximum FREQUENCY OPERATING TEMPERATURE RANGE Blank=0°C to 70°C (Standard) ET=-40°C to 85°C DUTY CYCLE Blank=50 ±10(%) (Standard) T=50 ±5(%) MECHANICAL DIMENSIONS SUGGESTED SOLDER PAD LAYOUT ALL DIMENSIONS IN MILLIMETERS ALL DIMENSIONS IN MILLIMETERS Pin 1: Tri-State Pin 2: Case Ground TAPE AND REEL DIMENSIONS Pin 3: Output Pin 4: Supply Voltage Tolerances= +0.1 ALL DIMENSIONS IN MILLIMETERS TAPE A B C D E 16±.3-.1 7.5±.1 6.75±.1 4 ±.1 2±.1 F G H J K 8±.1 B0* 1.5 +.1-0 A0* .3 ±.05 F M N O P Q 1.5 MIN 50 MIN 20.2 MIN 13±.2 40 MIN QTY/REEL 1,000 REEL L K0* R S T U V 2.5 MIN 10 MIN 22.4 MAX 360 MAX 16.4+2-0 *Compliant to EIA 481A MARKING SPECIFICATIONS ENVIRONMENTAL/MECHANICAL SPECIFICATIONS Line 1: ECLIPTEK Characteristic Specification Fine Leak Test Gross Leak Test Mechanical Shock Vibration Solderability Temperature Cycling Resistance to Soldering Heat Resistance to Solvents MIL-STD-883, Method 1014, Condition A MIL-STD-883, Method 1014, Condition C MIL-STD-202, Method 213, Condition C MIL-STD-883, Method 2007, Condition A MIL-STD-883, Method 2002 MIL-STD-883, Method 1010 MIL-STD-202, Method 210 MIL-STD-202, Method 215 Line 2: XX.XXX M Frequency in MHz (5 Digits Maximum + Decimal) Line 3: XX Y ZZ Week of Year Last Digit of Year Ecliptek Manufacturing Identifier MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR EC27 CERAMIC 2.5V OS52 11/06 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. Ecliptek MEMS Oscillators - Lower Cost, Quicker Delivery Alternative! The EMO™ family of oscillators offers exceptional performance, shorter delivery and significant cost advantages by utilizing a revolutionary new MEMS resonator technology. This important innovation enables Ecliptek to offer the ultimate in flexibility with delivery of 2 days for samples and 5 to 10 days for quantities up to 10,000 pieces on tape and reel. Package Dimensions (all dimensions in millimeters) Supply Voltage (VDC) 5x7 3.2 x 5 2.5 x 3.2 2 x 2.5 1.8 EMK11 EMK21 EMK31 EMK41 2.5 EMK12 EMK22 EMK32 EMK42 3.3 EMK13 EMK23 EMK33 EMK43 Would you like to request EMO™ samples or a quotation now? Click Here Want to learn more about the Ecliptek EMO™ family of MEMS oscillators? Click Here Product Features: • • • • • • • • • Improved frequency stability through the use of a MEMS resonator 1.8VDC, 2.5VDC, or 3.3VDC supply voltages Frequency range of 1MHz to 125MHz, HCMOS output Frequency stability to ±50ppm, -40°C to +85°C operation Tri-state or power down functions RoHS compliant High temperature +260°C reflow capability EIA compliant tape and reel packaging Four SMD package sizes If you have any questions or would like additional information regarding the Ecliptek EMO™ family of oscillators, please contact our Sales Department.