EV34C3 Series • RoHS Compliant (Pb-Free) • Voltage Controlled Crystal Oscillator (VCXO) • 2.5V Supply Voltage • LVCMOS output with Tri-State function • Ceramic 6-pad SMD package • APR Performance to ±100ppm • Commercial and Industrial Temperature Range EV34C3 H L W 1.65 7.0 5.0 OSCILLATOR ELECTRICAL SPECIFICATIONS Frequency Range (FO) Operating Temperature Range (OTR) Storage Temperature Range (STR) Supply Voltage (VDD) Input Current (IDD) Frequency Tolerance/Stability Output Voltage Logic High (VOH) Output Voltage Logic Low (VOL) Rise Time / Fall Time (TR/TF) Duty Cycle (SYM) Load Drive Capability (CLOAD) Aging (at 25°C) Start Up Time (TS) Tri-State Input Voltage RMS Phase Jitter Absolute Pull Range (APR) Linearity Control Voltage (VC) Control Voltage Range (VCR) Transfer Function Input Impedance (ZI) Input Leakage Current Modulation Bandwidth (MBW) Typical Phase Noise (Fo = 27.000MHz) 1.544MHz, 2.000MHz, 2.048MHz, 3.088MHz, 3.580MHz, 3.686MHz, 4.000MHz, 4.032MHz, 4.096MHz, 4.434MHz, 5.000MHz, 6.144MHz, 6.176MHz, 6.312MHz, 6.400MHz, 8.000MHz, 8.192MHz, 8.448MHz, 10.000MHz, 12.000MHz, 12.288MHz, 12.352MHz, 12.960MHz, 13.000MHz, 13.500MHz, 14.318MHz, 15.360MHz, 15.440MHz, 16.000MHz, 16.384MHz, 16.660MHz, 17.664MHz, 18.432MHz, 19.200MHz, 19.440MHz, 20.000MHz, 20.480MHz, 24.000MHz, 24.576MHz, 24.704MHz, 25.000MHz, 25.920MHz, 26.000MHz, 27.000MHz, 28.636MHz, 30.000MHz, 30.720MHz, 32.000MHz, 32.768MHz, 34.368MHz, 35.328MHz, 36.864MHz, 38.880MHz, 40.000MHz, 40.960MHz, 44.736MHz, 49.152MHz, 50.000MHz, 51.840MHz, 52.000MHz, 62.208MHz, 65.536MHz, 74.250MHz, 77.760MHz 0°C to +70°C or -40°C to +85°C -55°C to +125°C 2.5VDC ±5% 15mA Maximum Inclusive of All Conditions: Calibration Tolerance at 25°C, ±50ppm Maximum Frequency Stability over the Operating Temperature Range, Supply Voltage Change, Output Load Change, Shock, and Vibration IOH = -4mA 90% of VDD Minimum IOL = +4mA 10% of VDD Maximum 20% to 80% of Waveform 5 nSeconds Maximum at 50% of Waveform 50 ±5(%) Typical, 50 ±10(%) Maximum 15pF Maximum ±2ppm/1st year typical, ±10ppm /10 years Max. 10 mSeconds Maximum VIH: No Connection Enables Output VIH: >0.9VDD Enables Output VIL: <0.1VDD Disables Output: High Impedance FJ=12kHz to 20MHz 1pSec Maximum Inclusive of All Conditions: Calibration Tolerance at 25°C, ±50ppm Minimum Frequency Stability over the Operating Temperature Range, Supply ±80ppm Minimum < 51.840MHz only Voltage Change, Output Load Change, Shock, Vibration, and Aging ±100ppm Minimum < 36.000MHz only over Control Voltage (VC) 10% Typical, 20% Maximum Test Condition for APR 0.2VDC to 2.3VDC 0.0VDC to VDD Positive Transfer Characteristic 50kOhms Minimum 10µA Maximum -3dB, VC = 1.25VDC 10kHz Minimum At offset of 10Hz -65dBc/Hz At offset of 100Hz -95dBc/Hz At offset of 1kHz -120dBc/Hz At offset of 10kHz -142dBc/Hz At offset of 100kHz -152dBc/Hz At offset of 1MHz -154dBc/Hz MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR EV34C3 CERAMIC 2.5V OS7H 09/09 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. PART NUMBERING GUIDE EV34C3 B 3 A 1 - 35.328M TR AVAILABLE OPTIONS Blank=Bulk (Standard) TR=Tape and Reel OPERATING TEMPERATURE RANGE A=0°C to +70°C, B=-40°C to +85°C FREQUENCY ABSOLUTE PULL RANGE (APR) 3=±50ppm Minimum 4=±80ppm Minimum, 5=±100ppm Minimum DUTY CYCLE 1=50 ±5(%) Typical, 50 ±10(%) Maximum LINEARITY A=10% Typical, 20% Maximum MECHANICAL DIMENSIONS SUGGESTED SOLDER PAD LAYOUT ALL DIMENSIONS IN MILLIMETERS ALL DIMENSIONS IN MILLIMETERS Pin 1: Control Voltage (VC) Pin 2: No Connect Pin 3: Case Ground TAPE AND REEL DIMENSIONS Pin 4: Output Pin 5: Tri-State Pin 6: Supply Voltage Tolerances= +0.1 ALL DIMENSIONS IN MILLIMETERS TAPE A B C D E 16±.3-.1 7.5±.1 6.75±.1 4 ±.1 2±.1 F G H J K 8±.1 B0* 1.5 +.1-0 A0* .3 ±.05 F M N O P Q 1.5 MIN 50 MIN 20.2 MIN 13±.2 40 MIN QTY/REEL 1,000 REEL L K0* R S T U V 2.5 MIN 10 MIN 22.4 MAX 360 MAX 16.4+2-0 *Compliant to EIA 481A MARKING SPECIFICATIONS ENVIRONMENTAL/MECHANICAL SPECIFICATIONS Characteristic Specification ESD Susceptibility Fine Leak Test Flammability Gross Leak Test Mechanical Shock Moisture Resistance Moisture Sensitivity Resistance to Soldering Heat Resistance to Solvents Solderability Temperature Cycling Vibration MIL-STD-883, Method 3015, Class 1, HBM: 1500V MIL-STD-883, Method 1014, Condition A UL94-V0 MIL-STD-883, Method 1014, Condition C MIL-STD-883, Method 2002, Condition B MIL-STD-883, Method 1004 J-STD-020, MSL 1 MIL-STD-202, Method 210, Condition K MIL-STD-202, Method 215 MIL-STD-883, Method 2003 MIL-STD-883, Method 1010, Condition B MIL-STD-883, Method 2007, Condition A Line 1: ECLIPTEK Line 2: XX.XXX M Frequency in MHz (5 Digits Maximum + Decimal) Line 3: XX Y ZZ Week of Year Last Digit of Year Ecliptek Manufacturing Identifier MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR EV34C3 CERAMIC 2.5V OS7H 09/09 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice.