HPD15 SERIES Single, dual and triple output • • • • • • 2.0 x 2.0 x 0.4 inch package (singles and duals) 2:1 wide input voltage range 30 models available including 2.1V and 3.3V outputs Indefinite short circuit protection EN55022 conducted emissions level A Designed to meet EN60950 and IEC950 The HPD15 series of DC/DC converters offer 15 Watts of output power in a high density 2 x 2 inch case. A range comprises 30 models with 2:1 wide input voltages of 9-18V, 18-36V and 36-72VDC. Single, dual and triple outputs are available with 2.1V and 3.3V single outputs suitable for low voltage logic requirements. Standard features of the HPD15 series include indefinite short circuit protection and undervoltage lockout. The series meets EN55022 level A conducted and radiated emissions. In addition to this, all outputs are regulated and isolated from the input. Typical applications are on board logic or analog circuits supplied by telecom distribution power voltages, cellular and telecommunications systems. [ 2 YEAR WARRANTY ] SPECIFICATION All specifications are typical at nominal input, full load at 25°C unless otherwise stated OUTPUT SPECIFICATIONS EMC CHARACTERISTICS Line regulation LL to HL, singles and duals LL to HL, triple output Cross regulation Duals: asymmetrical load 10% to 100% FL Triples: asymmetrical load 10% to 100% FL Load regulation Singles and duals: 10% to 100% FL Triples: 10% to 100% FL Voltage accuracy ±0.3% ±1.5% Conducted emissions Radiated emissions EN55022, FCC part 15 EN55022, FCC part 15 4.0% max. GENERAL SPECIFICATIONS 5.0% max. Efficiency See table Isolation voltage Input/output 500VDC Isolation resistance Input/output 109Ω Isolation capacitance Input/output 1nF 78% typ. ±0.2% ±4.0% ±2.0% Switching frequency Fixed 2.1V, 3.3V, 5V 50mA max. Single 12V, 15V 20mA max. Duals & triples, each output 10% FL Approvals and standards Designed to meet Overshoot At start-up Case material Ripple and noise 20MHz bandwidth Minimum load Temperature coefficient Short circuit protection 3.0% max. 1.5% pk-pk, max. 20mV rms ±0.02%/°C Hiccup mode See Note 4 Indefinite 12VDC nominal 24VDC nominal 48VDC nominal Input current Undervoltage lockout 12V nominal (dual and triple outputs) 24V nominal 48V nominal Start-up time PAGE 1 180 to 220kHz Black coated, metal case Material flammability UL94V-0 Weight MTBF EN60950 IEC950 65g (2.29oz) MIL-HDBK-217F 300,000 hours ENVIRONMENTAL SPECIFICATIONS INPUT SPECIFICATIONS Input voltage range Level A Level A Thermal performance Operating ambient -10°C to +50°C (See derating curve) Extended temp., -25°C to +50°C option, See Note 2 Non-operating amb. -25°C to +95°C Case +95°C max. Derating See derating curve Cooling Free air convection cooled Relative humidity Non-condensing Altitude Operating Non operating 10,000 feet max. 40,000 feet max. Vibration 5Hz to 500Hz 2.5G rms (approx.) 9 to 18VDC 18 to 36VDC 36 to 72VDC See table 8.5VDC 17VDC 34VDC 200ms 30% to 95% DC/DC CONVERTERS | 15W DC/DC 15 Watt Wide input DC/DC converters INPUT OUTPUT OUTPUT INPUT TYPICAL REGULATION (Typ.) MODEL VOLTAGE VOLTAGE CURRENT CURRENT EFFICIENCY LINE LOAD NUMBER 9-18VDC 2.1V 3000mA 807mA 65% ±0.3% ±0.2% HPD15-12S2V1 9-18VDC 3.3V 3000mA 1213mA 68% ±0.3% ±0.2% HPD15-12S3V3 9-18VDC 5.0V 3000mA 1689mA 74% ±0.3% ±0.2% HPD15-12S05 9-18VDC 12V 1200mA 1558mA 77% ±0.3% ±0.2% HPD15-12S12 9-18VDC 15V 1000mA 1602mA 78% ±0.3% ±0.2% HPD15-12S15 9-18VDC ±5.0V ±900mA 986mA 76% ±0.3% ±0.2% HPD15-12D05 9-18VDC ±12V ±600mA 1530mA 78% ±0.3% ±0.2% HPD15-12D12 9-18VDC ±15V ±450mA 1424mA 79% ±0.3% ±0.2% HPD15-12D15 9-18VDC 5V/±12V 1500mA/±300mA 1570mA 78% ±1.5% ±4.0% HPD15-12T05-12 9-18VDC 5V/±15V 1500mA/±240mA 1570mA 78% ±1.5% ±4.0% HPD15-12T05-15 18-36VDC 2.1V 3000mA 403mA 65% ±0.3% ±0.2% HPD15-24S2V1 18-36VDC 3.3V 3000mA 606mA 68% ±0.3% ±0.2% HPD15-24S3V3 18-36VDC 5.0V 3000mA 822mA 76% ±0.3% ±0.2% HPD15-24S05 18-36VDC 12V 1200mA 769mA 78% ±0.3% ±0.2% HPD15-24S12 18-36VDC 15V 1000mA 781mA 80% ±0.3% ±0.2% HPD15-24S15 18-36VDC ±5.0V ±900mA 487mA 77% ±0.3% ±0.2% HPD15-24D05 18-36VDC ±12V ±600mA 759mA 79% ±0.3% ±0.2% HPD15-24D12 18-36VDC ±15V ±450mA 712mA 79% ±0.3% ±0.2% HPD15-24D15 18-36VDC 5V/±12V 1500mA/±300mA 785mA 78% ±1.5% ±4.0% HPD15-24T05-12 18-36VDC 5V/±15V 1500mA/±240mA 785mA 78% ±1.5% ±4.0% HPD15-24T05-15 36-72VDC 2.1V 3000mA 201mA 65% ±0.3% ±0.2% HPD15-48S2V1 36-72VDC 3.3V 3000mA 303mA 68% ±0.3% ±0.2% HPD15-48S3V3 36-72VDC 5.0V 3000mA 400mA 78% ±0.3% ±0.2% HPD15-48S05 36-72VDC 12V 1200mA 384mA 78% ±0.3% ±0.2% HPD15-48S12 36-72VDC 15V 1000mA 390mA 80% ±0.3% ±0.2% HPD15-48S15 36-72VDC ±5.0V ±900mA 243mA 77% ±0.3% ±0.2% HPD15-48D05 36-72VDC ±12V ±600mA 379mA 79% ±0.3% ±0.2% HPD15-48D12 36-72VDC ±15V ±450mA 356mA 79% ±0.3% ±0.2% HPD15-48D15 36-72VDC 5V/±12V 1500mA/±300mA 392mA 78% ±1.5% ±4.0% HPD15-48T05-12 36-72VDC 5V/±15V 1500mA/±240mA 392mA 78% ±1.5% ±4.0% HPD15-48T05-15 Notes 3 4 DERATING CURVE Output Power (Watts) 15W -10°C 50°C '-4' Option 2 Cross regulation: Duals: output 1, full load, 6.0%; output 2, minimum load, 6.0%. Triples: output 1, full load, 3.0%; output 2 vs. output 3, 3.0%; Triples: outputs 2 and 3 vs. output 1, 6.0%. Extended operating temperature range is available as an option. To specify a HPD15 that operates down to -25°C, add the suffix ‘-4’ to the model number, e.g. HPD15-24S05-4. An alternate pin-out version is available as an option. See mechanical drawings for details. To specify an HPD15 with the alternative pin-out (center pins), add the suffix ‘-C’ to the model number, e.g. HPD15-24S05-C. All 2.1V and 3.3V outputs, 1 minute max. Output Power (Watts) 1 90°C 0W -25°C 0°C 20°C 40°C 60°C 80°C 100°C Ambient Temperature (°C) http://www.artesyn.com PAGE 2 15W DC/DC | DC/DC CONVERTERS 15 Watt Wide input DC/DC converters PIN CONNECTIONS PIN NUMBER SINGLE/DUAL OUTPUTS TRIPLE OUTPUT 1 + Input + Input 2 - Input - Input 3 + Vout + Output (V2) 4 Common + 5V 5 - Vout Common 6 - - Output (V3) Pinout (Single, Dual) Pinout (single, dual) 2.00 (50.80) 0.24 (6.00) 0.42 (10.70) 1.65 (42.00) 0.17 (4.40) 0.17 (4.40) 0.24 (6.00) 2.00 (50.80) 0.42 (10.70) 0.20 (5.10) 0.90 (22.85) 0.90 (22.85) 1.15 (3.80) - + Input Ø 0.04 Dia. (1.00) 0.60 (15.25) + - 1.70 (43.20) BOTTOM VIEW 2.00 (50.80) Input Ø 0.04 Dia. (1.00) 2.00 (50.80) 0.80 (20.30) BOTTOM VIEW - Output COM/N.C. - 0.60 (15.25) + 0.85 (21.60) 0.15 (3.80) 0.85 (21.60) ALL DIMENSIONS IN INCHES (mm) Tolerance : ±0.008 (0.2) max. on pin placement ±0.02 (0.5) max. on outer dimensions + Output 1.15 (3.80) 0.15 (3.80) COM/N.C. 0.60 (15.25) 0.80 (20.30) 0.60 (15.25) ALL DIMENSIONS IN INCHES (mm) Tolerance : ±0.008 (0.2) max. on pin placement ±0.02 (0.5) max. on outer dimensions Pinout (Triple) 0.24 (6.00) 0.10 (2.54) 0.50 (12.70) 2.0 (50.80) 0.90 (22.85) 0.90 (22.85) 0.20 (5.10) + Input Ø 0.04 Dia. (1.00) 1.80 (45.72) BOTTOM VIEW 2.00 (50.80) Output COM 5V - 0.10 (2.54) 0.39 (10.10) 0.40 (10.20) 0.40 (10.20) + 0.40 (10.20) 0.39 (10.10) ALL DIMENSIONS IN INCHES (mm) Tolerance : ±0.008 (0.2) max. on pin placement ±0.02 (0.5) max. on outer dimensions DS_HPD15_19980401.PDF PAGE 3