JVA40 Series DC-DC Converter 40 Watts xxx Series • Renewable Energy and Industrial Applications • Ultrawide Input Range - 200-1500 VDC • Fully Encapsulated PCB Mount & DIN Rail Versions • Optional DIN Rail Versions with Built In EMI Filter 1500 VDC Fuse • -40 °C to +70 °C Operating Temperature • Remote On/Off • 3 Year Warranty Dimensions: JVA4015005: 4.4 x 2.95 x 1.58” (111.76 x 75.0 x 40.0 mm) JVA4015005-D: 5.43 x 5.75 x 2.17” (138.0 x 146.0 x 55.0 mm) JVA4015005-DF: 5.08 x 4.02 x 1.92” (129.0 x 102.0 x 49.0 mm) Models & Ratings Output Power Input Voltage 40 W 200-1500 V Output Voltage Overvoltage Protection Output Current Input Current(1) Typical Efficiency(4) Maximum Capacitive Load Model Number(3,4) 12.0 V 20.0 V 3330 mA 66 mA 76% 2000 µF JVA401500S12 15.0 V 20.0 V 2670 mA 64 mA 78% 1200 µF JVA401500S15 24.0 V 30.0 V 1670 mA 63 mA 80% 470 µF JVA401500S24 Notes 1. At 200 VDC input 2. For DIN rail mount option, add suffix '-D' e.g. JVA401500S12-D 3. For DIN rail with added EMI filter option, add suffix '-DF' e.g. JVA401500S24-DF 4. At 800 VDC Input Input Characteristic Input Voltage Range Minimum Typical 200 Maximum Units 1500 VDC Notes & Conditions Input Current 320/80/42 mA 200 VDC/800 VDC/1500 VDC input Inrush Current 30/80/150 A 200 VDC/800 VDC/1500 VDC input Input Filter Pi type Undervoltage Lockout On 180-195 V, Off 170-185 V Input Protection External 15 A/1500 VDC fuse required This is already included in the optional -DF version Output Characteristic Minimum Output Voltage 5 Initial Set Accuracy Minimum Load Typical Maximum Units 24 V ±2 % 0 A Start Up Delay 2 ±1.0 3 % Load Regulation 1 3 % 150 300 mV pk-pk Short Circuit Protection Overload Protection 1 0 - 100% load 20 MHz bandwidth Trip & Restart (hiccup mode), auto recovery 120 320 % 0.02 %/ ˚C Overvoltage Protection Temperature Coefficient No minimum load required s Line Regulation Ripple & Noise Notes & Conditions See Models and Ratings table Trip & Restart (hiccup mode) See Models and Ratings table www.xppower.com JVA40 Series DC-DC Converter General Characteristic Minimum Typical Isolation Maximum % See Models and Ratings table VAC 4000 Switching Frequency 65 m 5000 300 Weight For 60 s kHz Operating Altitude Mean Time Between Failure Notes & Conditions Units 72 Efficiency 0.903 (410) Derate from 100% load at 2000 m to 80% load at 5000 m kHrs MIL-HDBK-217F, +25 °C GB lb (g) For PCB mount version Environmental Maximum Units Notes & Conditions Operating Temperature -40 +70 °C See derating curve Storage Temperature -50 +85 °C 95 °C 5 95 %RH Characteristic Minimum Typical Case Temperature Humidity Non-condensing Cooling Natural convection Shock ±3 shocks in each plane, total 18 shocks of 30 g : 11 ms halfsine. Conforms to EN60068-2-27 & EN60068-2-47 Vibration 10-500 Hz at 2 g sweep and endurance at resonance in all 3 planes. Conforms to EN60068-2-6 EMC: Emissions Phenomenon Standard Test Level Conducted EN55032 Level A Radiated EN55032 Level A Notes & Conditions See application notes. Not required for ‘-DF’ versions EMC: Immunity Phenomenon Standard Immunity EN55024 Test Level Criteria ESD Immunity EN61000-4-2 ±6 kV Contact, ±8 kV Air A Radiated Immunity EN61000-4-3 10 V/m A A EFT/Burst EN61000-4-4 3 Surges EN61000-4-5 3 A Conducted Immunity EN61000-4-6 10 Vm A Magnetic Fields EN61000-4-8 30 A/m A Notes & Conditions Safety Approvals Safety Agency Safety Standard Notes & Conditions EN EN62109 Photovoltaic Power System UL UL1741/CSA-C22.2 No.107-1 Distributed Energy Resources www.xppower.com 2 JVA40 Series DC-DC Converter Application Notes Input Voltage 300-1500 VDC Thermal Derating Curve 100 90 Output Power (%) 80 70 60 50 40 Input voltage 200-300 VDC 0 -40 Input Derating Curve 0 Ambient Temperature (°C) 50 70 100 90 Output Power (%) 80 70 60 50 40 30 20 10 0 200 0 0 Input Voltage (VDC) 1200 1500 EMI Filter for Conducted Emissions +Input L1 Fuse C7 C8 C9 -Input C10 Model L2 + + + + C3 C4 C5 C6 R1 +Vo +Vin R2 R4 C2 TVS RL JVA401500S15 Element Model C7/C8/C9/C10 C3/C4/C5/C6 -Vin -Vo R1/R2/R3/R4 L1 L2 Fuse 3 www.xppower.com C1 (µF) JVA401500S12 JVA401500S24 + JVA40 R3 C1 1 C2 (µF) 120 120 68 TVS SMBJ20A SMBJ20A SMBJ30A Recommended Value 104K/275 VAC 47 µF/450 VDC 1 MΩ/2 W 330 µH/1 A 7 mH/1 A 15 A/1500 VDC JVA40 Series DC-DC Converter Mechanical Details Standard PCB Mount 1.57 (40.0) Front View 0.23 (6.0) 4 ø 0.138 (ø 3.50) 4.92 (125.0) 4.54 (115.5) Third Angle Projection 5 ø 0.067 (ø 1.70) 5 ø 0.047 (ø 1.20) 2.95 (75.0) 2 3 2.57 (65.5) 1 5 4 Bottom View 0.40 (10.16) 1.6 (40.6) Pin 1 2 3 4 5 Pin Connections Function -Vin +Vin No Connection -Vo +Vo 4 1 5 3 2 4-M3 (0.118) 4.40 (111.76) Note：Grid 2.54*2.54mm Optional DIN rail mount, -D 5.07 (129.0) 9 7 8 6 Right View Front View 4.01 (102.0) 1 2 3 4 Pin 1 2 3 4 5 6 7 8 9 Pin Connections Function +Vo -Vo No Connection No Connection No Connection +Vin +Vin -Vin -Vin 5 LED 1.92 (49.0) Optional DIN rail mount with filter, -DF 5.78 (146.0) LED 9 8 7 6 5 2 x M3 Screws Unscrew two scres to replace the fuse from shell 5.43 (138.0) 5.43 (138.0) Front View 1 2 3 Bottom View Pin 1 2 3 4 5 6 7 8 9 Pin Connections Function -Vin -Vin +Vin +Vin +Vo -Vo No Connection No Connection No Connection 4 Notes 1. All dimensions are in inches (mm) 2. Weight: Standard PCB mount: 0.903 lbs (410 g) approx Optional DIN rail mount, -D: 1.04 lbs (470 g) approx Optional DIN rail mount with filter, -DF: 1.59 lbs (720 g) approx www.xppower.com 05 Jan 18