Double Balanced Mixer Model MM9xxN-11 RF 6.0 to 18.0 GHz Multi-Octave Band Electrical Specifications : (1) Conditions Parameter SSB Conversion loss: (2) (3) RF (GHz) 6.0-18.0 6.0-18.0 6.0-18.0 6.0-18.0 Isolation LO to RF: LO to IF: RF to IF: Input 1 dB Compression Point: 6.0-18.0 6.0-18.0 Input Third Order Intercept Point: LO Power: (4) LO (GHz) 5.0-18.0 4.0-18.0 4.0-18.0 4.0-18.0 IF (MHz) DC-1000 DC-3000 DC-4000 DC-4500 4.0-14.0 14.0-18.0 4.0-18.0 4.0-18.0 DC-4500 6.0-18.0 4.0-18.0 DC-4500 6.0-18.0 4.0-18.0 DC-4500 Min Typical 5.5 dB 6.0 dB 6.5 dB 7.0 dB 25 dB 22 dB 20 dB 40 dB 35 dB 24 dB 22 dB +2 dBm +5 dBm +8 dBm +12 dBm +11 dBm +14 dBm +18 dBm +23 dBm +7 dBm +10 dBm +14 dBm +19 dBm Notes: 1. Specifications are guaranteed when tested as a downconverter in a 50 Ohm system from -55˚C to +100˚C with the nominal LO power. Specifications indicated as typical are not guaranteed. 2. Noise figure is typically within ±0.5 dB of conversion loss for IF frequencies greater than 10 MHz. 3. Conversion loss typically degrades less than 0.5 dB at +100˚C and improves less than 0.5 dB at -55˚C. 4. Usable LO drives are up to 2 dB below and 3 dB above nominal. MM9xxN-11 Model MM9xxN-11 Specifications Outline: N Max 7.5 dB 8.0 dB 8.5 dB 9.0 dB LO Power 3 = +7 dBm 4 = +10 dBm 6 = +14 dBm 7 = +19 dBm MM93 MM94 MM96 MM97 MM93 MM94 MM96 MM97 MM93 MM94 MM96 MM97 Drop-In Module or With SMA(F) Connectors M = Module P = With Connectors Typical Performance at 25˚C 6.0 SPECTRUM 4.0 All dimensions are in inches and [mm]. MHz MHz Spectrum Microwave · 2144 Franklin Drive N.E. · Palm Bay, FL 32905 · PH (888) 553-7531 · Fax (888) 553-7532 www.SpectrumMicrowave.com Spectrum Microwave (Europe) · 2707 Black Lake Place · Philadelphia, PA 19154 · PH (215) 464-4000 · Fax (215) 464-4001