SuperFlux LEDs Lead-Free Introduction The popular through-hole package design allows lighting designers to reduce the number of LEDs required and provide a more uniform and unique illuminated appearance than with other LED products. This is possible through the efficient optical package design and high-current capabilities. The low profile package can be easily coupled with reflectors or lenses to efficiently distribute light and provide the desired appearance. This product family includes red, red-orange and amber LEDs, allowing lighting designers to match the color of many lighting applications like vehicle signal lamps, specialty lighting, and electronic signs. Features Key Applications • Rugged package • Automotive • Energy saving • Ease of handling • Lead-Free • RoHS Compliant • High Luminance • Uniform Color • Low Power Consumption SuperFlux LEDs DS55 ©2014 Philips Lumileds Lighting Company. -- Central High Mount Stop Lamp (CHMSL) -- Stop Lamp • Illumination -- Signal Lamps Table of Contents Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Mechanical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Optical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Electrical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Figures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Recommended Soldering Conditions for Pb-Free SuperFlux . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Product Binning and Labeling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Part Number Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 SuperFlux LEDs Datasheet DS55 20140221 ©2014 Philips Lumileds Lighting Company. i Selection Guide Table 1. Device Type Overview LED Color Device Type Typical Total Included Angle [1] (degrees) u0.90V HPWT-RDx2 44 X 88 HPWT-MDx2 100 HPWT-DDx2 70 HPWT-BDx2 50 HPWT-RHx2 44 X 88 HPWT-MHx2 100 HPWT-DHx2 70 HPWT-BHx2 50 HPWT-RLx2 44 X 88 HPWT-MLx2 100 HPWT-DLx2 70 HPWT-BLx2 50 HPWT Units Red Red-Orange Amber Notes for Table 1: 1. u0.90 V is the included angle at which 90% of the total luminous flux is captured. Absolute Maximum Ratings Table 2. Parameter DC Forward Current [1] 70 mA Power Dissipation 221 mW Reverse Voltage (IR = 100 µA) 10 V Operating Temperature Range -40 - +100 °C Storage Temperature Range -55 - +100 °C High Temperature Chamber 125°C, 2 hours LED Junction Temperature 125°C Notes for Table 2: 1. Derate as shown in Figures 4. SuperFlux LEDs Datasheet DS55 20140221 ©2014 Philips Lumileds Lighting Company. 2 Mechanical Dimensions Figure 1. Package outline drawing. SuperFlux LEDs Datasheet DS55 20140221 ©2014 Philips Lumileds Lighting Company. 3 Optical Characteristics Optical Characteristics at TA = 25°C, IF = 70 mA, RuJ-A = 200°C/W Table 3. LED Color Red Red-Orange Amber Device Type Typical Total Typ. Peak Typ. Dominant Included Angle [2] Wavelength lpeak Wavelength ldom (degrees) (nm) (nm) [1] u0.90V Luminous Intensity Total Flux Iv(cd)/Fv(lm) Viewing Angle (degrees) 2u 1/2 HPWT-RDx2 640 630 44 X 88 1.25 25 X 68 HPWT-MDx2 640 630 100 0.6 70 HPWT-DDx2 640 630 70 1.5 40 HPWT-BDx2 640 630 50 2.0 30 25 X 68 HPWT-RHx2 626 620 44 X 88 1.25 HPWT-MHx2 626 620 100 0.6 70 HPWT-DHx2 626 620 70 1.5 40 HPWT-BHx2 626 620 50 2.0 30 25 X 68 HPWT-RLx2 596 594 44 X 88 1.25 HPWT-MLx2 596 594 100 0.6 70 HPWT-DLx2 596 594 70 1.5 40 HPWT-BLx2 596 594 50 2.0 30 Notes for Table 3: 1. The dominant wavelength is derived from the CIE Chromaticity Diagram and represents the perceived color of the device. 2. u0.90 V is the included angle at which 90% of the total luminous flux is captured. SuperFlux LEDs Datasheet DS55 20140221 ©2014 Philips Lumileds Lighting Company. 4 Electrical Characteristics Electrical Characteristics at TA = 25°C Table 4. LED Color Device Type Forward Voltage Vf [1] (Volts) IF = 70 mA (HPWT) Reverse Breakdown @ VR (Volts) [1] @ IR = 100 µA Min Typ Max Min Typ Capacitance C (pF) VF = 0 F =1 MHz. Typical Thermal Resistance (°C/W) Ru J-PIN Typ. Speed of Response ts (ns) [2] Red HPWT-xDx2 2.19 2.6 3.03 10 20 40 125 20 Red-Orange HPWT-xHx2 2.19 2.6 3.03 10 20 40 125 20 Amber HPWT-xLx2 2.19 2.6 3.15 10 20 40 125 20 Notes for Table 4: 1. Operation in reverse bias is not recommended. 2. ts is the time constant, et/ts. SuperFlux LEDs Datasheet DS55 20140221 ©2014 Philips Lumileds Lighting Company. 5 Figures 1.0 Relative Spectral Power Distribution 0.9 REDORANGE 0.8 RED 0.7 0.6 AMBER 0.5 0.4 0.3 0.2 0.1 0.0 540 570 600 630 660 690 Wavelength (nm) Figure 2. Relative intensity vs. wavelength. 70 Forward Current (mA) 60 50 40 30 20 10 0 1.7 1.9 2.1 2.3 2.5 2.7 2.9 Forward Voltage (V) Figure 3. Forward current vs. forward voltage. SuperFlux LEDs Datasheet DS55 20140221 ©2014 Philips Lumileds Lighting Company. 6 Figures, Continued 1.2 Normalized Luminous Flux 1.0 0.8 0.6 0.4 0.2 0.0 10 20 30 40 50 60 70 Forward Current (mA) Figure 4. Typical luminous flux vs. forward current for Superflux. SFX Max DC (RO)-2013 EDITS SEPT 26 Max DC Forward Current For Superflux (Red-Orange) Maximum DC Curent - mA 75 60 100 C/W 200 C/W 300 C/W 400 C/W 45 500 C/W 600 C/W 100 C/W, above max Ta 200 C/W, above max Ta 30 300 C/W, above max Ta 400 C/W, above max Ta 500 C/W, above max Ta 600 C/W, above max Ta 15 0 0 15 30 45 60 75 90 105 120 135 150 Ambient Temperature - degrees C Figure 5. HPWT-xxxx relative luminous flux vs. forward current. SuperFlux LEDs Datasheet DS55 20140221 ©2014 Philips Lumileds Lighting Company. 7 Figures, Continued 3.0 2.5 Relative Intensity Red-Orange Amber 2.0 1.5 Red 1.0 0.5 0.0 -40 -25 -10 5 20 35 50 65 80 95 110 125 Junction Temperature Figure 6. Luminous flux vs. junction temperature for superflux. SuperFlux LEDs Datasheet DS55 20140221 ©2014 Philips Lumileds Lighting Company. 8 Figures, Continued 1.0 0.8 Relative Intensity Horizontal Vertical 0.6 0.4 0.2 0.0 -90 -70 -50 -30 -10 10 30 50 70 90 Off Axis Angle (degrees) Figure 7a. HPWT-Rxxx relative luminous intensity vs. off axis angle. 1.0 Relative Intensity 0.8 0.6 0.4 0.2 0.0 -90 -70 -50 -30 -10 10 30 50 70 90 Off Axis Angle (degrees) Figure 7b. HPWT-Mxxx relative luminous intensity vs. off axis angle. SuperFlux LEDs Datasheet DS55 20140221 ©2014 Philips Lumileds Lighting Company. 9 Figures, Continued 1.0 Relative Intensity 0.8 0.6 0.4 0.2 0.0 -90 -70 -50 -30 -10 10 30 50 70 90 Off Axis Angle (degrees) Figure 7c. HPWT-Bxxx relative luminous intensity vs. off axis angle. 1.0 Relative Intensity 0.8 0.6 0.4 0.2 0.0 -90 -70 -50 -30 -10 10 30 50 70 90 Off Axis Angle (degrees) Figure 7d. HPWT-Dxxx relative luminous intensity vs. off axis angle. SuperFlux LEDs Datasheet DS55 20140221 ©2014 Philips Lumileds Lighting Company. 10 Recommended Soldering Conditions for Pb-Free SuperFlux 300 Tempearature (oC) 250 200 150 100 50 0 0 10 20 30 40 50 60 70 73 80 90 100 Time (Seconds) Figure 8. Recommended solder profile. Table 5. Solder Conditions Preheat Temperatue (°C) 100 +/- 10°C Preheat Time (s) 70 +/- 20s Peak Profile Temperature (°C) 245 +/- 5°C Solder Time Above 217°C 2.5 +/- 0.5s Notes: 1. All top preheat stages are to be turned off so that the LED body is not directly exposed to the heat source. 2. Profile taken on the LED lead at the bottom of the PCB. 3. Single wave soldering is recommended. 4. Soldering at the lowest possible peak profile temperature and shortest solder time above 217ºC are preferable to the LED. 5. 6. 7. 8. The pre-heat temperature ramping rate shall not more than 3ºC per second. Do not apply any stress on LED and perform LED lead cutting when the package still not return to room temperature. After soldering, the LED must be protected from mechanical shock and vibration until LED return to room temperature. Solder rework on LED should be avoided. SuperFlux LEDs Datasheet DS55 20140221 ©2014 Philips Lumileds Lighting Company. 11 Product Binning and Labeling Table 6. Luminous Flux bins for Red, Red-Orange and Amber @ 70 mA Bin Code Minimum Luminous Flux Bin Maximum Luminous Flux Bin C 1.5 2.4 D 2.0 3.0 E 2.5 3.6 F 3.0 4.2 4.8 G 3.5 H 4.0 6.1 J 5.0 7.3 L 6.0 9.7 M 8.0 12.0 N 10.0 16.0 Note for Table 6: 1. Total Luminous Flux as measured with an integrating sphere after the device has stabilized. Tj ~ 60°C. Table 7. Dominant Wavelength Bins LED Color Bin Code Minimum Dominant Wavelength (nm) Maximum Dominant Wavelength (nm) Red 0 622 645 1 611 617 Red-Orange Amber 2 615 621 3 619 629 1 587 591 2 589 594 9 592 595 3 592 597 Table 8. Forward Voltage Bins, Red, Red-Orange and Amber @ 70 mA Bin Code Min Voltage (V) Max Voltage (V) 1 2.19 2.43 2 2.31 2.55 3 2.43 2.67 4 2.55 2.79 5 2.67 2.91 6 2.79 3.03 7 2.91 3.15 SuperFlux LEDs Datasheet DS55 20140221 ©2014 Philips Lumileds Lighting Company. 12 Part Number Selection Red Part Number Selection Table 9. LED Color Red Part Number Viewing Angle (degrees) 2u 1/2 Max Flux [1] Fv(lm) Minimum Intensity (cd) HPWT-RD02-00000 25 X 68 1.5 HPWT-RD02-D4000 25 X 68 2.0 4.8 2.5 HPWT-RD02-E4000 6.0 25 X 68 2.5 6.1 3.1 7.6 7.3 3.8 9.1 Min Flux [1] Fv(lm) Maximum Intensity (cd) 1.9 HPWT-RD02-F4000 25 X 68 3.0 HPWT-BD02-00000 30 1.5 HPWT-BD02-D4000 30 2.0 HPWT-BD02-E4000 30 2.5 6.1 5.0 12.2 HPWT-BD02-F4000 30 3.0 7.3 6.0 14.6 HPWT-DD02-00000 40 1.5 HPWT-DD02-D4000 40 2.0 4.8 3.0 7.2 HPWT-DD02-E4000 40 2.5 6.1 3.8 9.2 7.3 4.5 11.0 3.0 4.8 4.0 9.6 2.3 HPWT-DD02-F4000 40 3.0 HPWT-MD02-00000 70 1.5 HPWT-MD02-D4000 70 2.0 HPWT-MD02-E4000 70 2.5 6.1 1.5 3.7 HPWT-MD02-F4000 70 3.0 7.3 1.8 4.4 0.9 4.8 1.2 2.9 Notes for Table 9: 1. Fv is the total luminous flux output as measured with an integrating sphere after the device has stabilized. SuperFlux LEDs Datasheet DS55 20140221 ©2014 Philips Lumileds Lighting Company. 13 Part Number Selection Red-Orange Part Number Selection Table 10. LED Color Red-Orange Part Number Viewing Angle (degrees) 2u 1/2 Max Flux [1] Fv(lm) Minimum Intensity (cd) HPWT-RH02-00000 25 X 68 1.5 HPWT-RH02-D4000 25 X 68 2.0 4.8 2.5 HPWT-RH02-E4000 6.0 25 X 68 2.5 6.1 3.1 7.6 Min Flux [1] Fv(lm) Maximum Intensity (cd) 1.9 HPWT-RH02-F4000 25 X 68 3.0 7.3 3.8 9.1 HPWT-RH02-G4000 25 X 68 3.5 9.7 4.4 12.1 HPWT-RH02-H4000 25 X 68 4.0 12.0 5.0 15.0 HPWT-BH02-00000 30 1.5 3.0 12.2 HPWT-BH02-D4000 30 2.0 4.8 4.0 9.6 HPWT-BH02-E4000 30 2.5 6.1 5.0 12.2 HPWT-BH02-F4000 30 3.0 7.3 6.0 14.6 HPWT-BH02-G4000 30 3.5 9.7 7.0 19.4 12.0 8.0 24.0 HPWT-BH02-H4000 30 4.0 HPWT-DH02-00000 40 1.5 HPWT-DH02-D4000 40 2.0 HPWT-DH02-E4000 40 HPWT-DH02-F4000 40 2.3 4.8 3.0 7.2 2.5 6.1 3.8 9.2 3.0 7.3 4.5 11.0 HPWT-DH02-G4000 40 3.5 9.7 5.3 14.6 HPWT-DH02-H4000 40 4.0 12.0 6.0 18.0 HPWT-MH02-00000 70 1.5 0.9 9.2 HPWT-MH02-D4000 70 2.0 4.8 1.2 2.9 HPWT-MH02-E4000 70 2.5 6.1 1.5 3.7 HPWT-MH02-F4000 70 3.0 7.3 1.8 4.4 HPWT-MH02-G4000 70 3.5 9.7 2.1 5.8 HPWT-MH02-H4000 70 4.0 12.0 2.4 7.2 SuperFlux LEDs Datasheet DS55 20140221 ©2014 Philips Lumileds Lighting Company. 14 Part Number Selection Amber Part Number Selection Table 11. LED Color Amber Part Number Viewing Angle (degrees) 2u 1/2 Min Flux [1] Fv(lm) Max Flux [1] Fv(lm) Minimum Intensity (cd) HPWT-RL02-00000 25 X 68 1.0 HPWT-RL02-C4000 25 X 68 HPWT-RL02-D4000 Maximum Intensity (cd) 1.5 4.2 1.9 5.3 25 X 68 2.0 4.8 2.5 6.0 HPWT-BL02-00000 30 1.0 HPWT-BL02-C4000 30 1.5 4.2 3.0 8.4 HPWT-BL02-D4000 30 2.0 4.8 4.0 9.6 HPWT-DL02-00000 40 1.0 1.5 12.2 HPWT-DL02-C4000 40 1.5 4.2 2.3 6.3 4.8 3.0 7.2 1.3 2.0 HPWT-DL02-D4000 40 2.0 HPWT-ML02-00000 70 1.0 HPWT-ML02-C4000 70 1.5 4.2 0.9 2.5 HPWT-ML02-D4000 70 2.0 4.8 1.2 2.9 SuperFlux LEDs Datasheet DS55 20140221 ©2014 Philips Lumileds Lighting Company. 0.6 15 Who We Are Philips Lumileds focuses on one goal: Creating the world’s highest performing LEDs. The company pioneered the use of solid-state lighting in breakthrough products such as the first LED backlit TV, the first LED flash in camera phones, and the first LED daytime running lights for cars. Today we offer the most comprehensive portfolio of high quality LEDs and uncompromising service. Philips Lumileds brings LED’s qualities of energy efficiency, digital control and long life to spotlights, downlights, high bay and low bay lighting, indoor area lighting, architectural and specialty lighting as well as retrofit lamps. Our products are engineered for optimal light quality and unprecedented efficacy at the lowest overall cost. By offering LEDs in chip, packaged and module form, we deliver supply chain flexibility to the inventors of next generation illumination. Philips Lumileds understands that solid state lighting is not just about energy efficiency. It is about elegant design. Reinventing form. Engineering new materials. Pioneering markets and simplifying the supply chain. It’s about a shared vision. Learn more about our comprehensive portfolio of LEDs at www.philipslumileds.com. Philips Lumileds Lighting Company shall not be liable for any kind of loss of data or any other damages, direct, indirect or consequential, resulting from the use of the provided information and data. Although Philips Lumileds Lighting Company has attempted to provide the most accurate information and data, the materials and services information and data are provided “as is” and Philips Lumileds Lighting Company neither warranties, nor guarantees the contents and correctness of the provided information and data. Philips Lumileds Lighting Company reserves the right to make changes without notice. You as user agree to this disclaimer and user agreement with the download or use of the provided materials, information and data. ©2014 Philips Lumileds Lighting Company. All rights reserved. LUXEON is a registered trademark of the Philips Lumileds Lighting Company in the United States and other countries. www.philipslumileds.com www.philipslumileds.cn.com SuperFlux LEDs Datasheet DS55 20140221