A. System Overview PHYSICAL INFRASTRUCTURE SYSTEMS B. Copper Systems 6x4 FiberRunner ® System Spillouts C. Fiber Optic Systems • Spill-overs allow safe transition from horizontal to vertical runs • 2" (50.8mm) bend radius control D. Power over Ethernet Part Number Part Description Couplers Required Std. Std. Pkg. Ctn. Qty. Qty. 6x4 QuikLock™ Vertical Tee E. Zone Cabling F. Wireless • Transition to channel, slotted channel, and corrugated loom tubing • Spill-over junction fittings can be retro-fitted to existing horizontal runs FRVT6X4YL Attaches to 6x4 channel and/or fittings to create 90° vertical drop from a straight horizontal run. Hinged door included. Accepts FTR4X4YL, FIDT4X4BL, S4X4YL6 or E4X4YL6 directly. Accepts optional snap-on cover FRHC6YL6 in conjunction with channel. (2 pcs.) FRBC6X4YL 1 5 — 1 5 — 1 5 — 1 — — 1 10 — 1 5 (1 pc.) FBC2X2YL 1 — FRVT6X4 3-Sided Vertical Tee Trumpet Spillout FTR4X4YL G. Outlets H. Media Distribution I. Physical Infrastructure Management FTR4X4 2-Port Spillout to 1.5" (38mm) Inside Diameter Corrugated Tubing FIDT4X4BL FIDT4X4BL K. Surface Raceway L. Cabinets, Racks & Cable Management M. Grounding & Bonding FRHD4KT Provides secure, accessible route for cables spilling out from vertical tee to rack mounted equipment. Kit includes 6' length of 4x4 capacity hinged duct, 6' length of 4x4 hinged duct cover, one end cap for 4x4 hinged duct, three FZBA1.5X4 adjustable “Z” brackets, an adapter fitting, six WR4-C wire retainers and all required mounting hardware. Attaches directly to 6x4 and 4x4 vertical tee exit or FRLPR64 low profile reducer. 4x4 Hinged Duct Bend Radius Control Trumpet TRC4HDBL TRC4HDBL Used to route cable into one or two pieces of 1.5" (38mm) diameter split corrugated tubing. Used with FRVT6X4YL, FRVT4X4YL, or FVT4X4YL. Securely holds corrugated split tubing to ensure system integrity and easy access to add or remove cables. Black color only. 4x4 Hinged Duct Vertical Cable Manager Kit FRHD4KTYL J. Overhead & Underfloor Routing Used to limit the bend radius of the cable to 2" (50.8mm) when exiting from a 4x4 or 6x4 FiberRunner ® Vertical Tee and 4x4 Fiber-Duct™ Fittings. Bend radius control trumpet for exiting at the sidewall of 4" wall heights of type H hinged cover wiring duct channels. Maintains 1" (25.4mm) bend radius control. Black color only. Low Profile Reducer 4x4 to 2x2 for Vertical Tee FRLPR42BL N. Industrial Assembled into the 6x4 vertical tee FRVT6X4YL or 4x4 vertical tee FRVT4X4YL with an audible snap, the FRLPR42BL allows for the transition to 2x2 FiberRunner ® or 2x2 Fiber-Duct™ Channel with minimal space required. No tools required for assembly. Black color only. FRLPR42BL Spill-Over Junction with 2x2 Exit O. Labeling & Identification P. Cable Management Accessories FRSPJ2X2YL FRSPJ2X2 Assembles onto 4x4, 6x4, 12x4, or 24x4 FiberRunner ® Channel, spilling over the side into a 2x2 vertical exit. Requires coupler to attach 2x2 FiberRunner ® and fittings to the vertical exit. Mounts directly to existing installation with no alteration required. Mounting hardware provided for secure attachment. For other colors replace suffix YL (Yellow) with OR (Orange) or BL (Black). Q. Index Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD. A. System Overview PHYSICAL INFRASTRUCTURE SYSTEMS B. Copper Systems 6x4 FiberRunner ® System Spillouts (continued) Part Number Part Description Couplers Required Std. Std. Pkg. Ctn. Qty. Qty. Cover for Spill-Over Junction with 2x2 Exit for 6x4 Channel FRSPJC26YL FRSPJC26 Used to fully enclose 6x4 channel in conjunction with the spill-over junction FRSPJ2X2YL. Cover snaps onto the channel base. Hinged feature allows easy access to add or remove cables. — 1 5 FTR2X2 Used to limit the bend radius of the cable to 2" (50.8mm) when exiting from a spill-over junction with a 2x2 exit or from 2x2 Fiber-Duct ™ Channel. Securely holds split corrugated tubing to ensure system integrity and easy access to add or remove cables. (1 pc.) FBC2X2YL 1 5 F. Wireless 1-Port Spillout to 1.5" (38mm) Inside Diameter Corrugated Tubing FIDT2X2YL FIDT2X2 Used to route cable into one piece of 1.5" (38mm) diameter split corrugated tubing. Used with a spill-over junction with a 2x2 exit, 2x2 Fiber-Duct™ Fittings, and the 2x2 FiberRunner ® Hinged Channel. Securely holds split corrugated tubing to ensure system integrity and easy access to add or remove cables. (1 pc.) FBC2X2YL 1 5 FRHD2KT Provides secure, accessible route for cables spilling out from a vertical tee or spill-over junction to rack mounted equipment. Kit includes 6' length of 2x2 FiberRunner ® Hinged Channel H2X2YL6, 6' length of 2x2 snap-on hinged cover HC2YL6, four adjustable “Z” brackets FZBA1.5X4, one FiberRunner ® 2x2 End Cap FHDEC2X2YL, six hinged duct 2" wire retainers WR2H-C and all required mounting hardware. Attaches to 2x2 vertical tee exit or spill-over junction with a 2x2 exit with a 2x2 QuikLock™ Coupler FBC2X2YL. Also attaches directly to 4x4 or 6x4 vertical tee exits with low profile reducer FRLPR42BL. — 1 — Bend radius control trumpet for exiting at the sidewall of 2" wall heights of type H hinged cover wiring duct channels. Maintains 1" (25.4mm) bend radius control. Black color only. TRC2HDBL K. Surface Raceway — 1 10 FRSPJ4X4 Assembles onto 4x4, 6x4, 12x4, or 24x4 FiberRunner ® Channel, spilling over the side into a 4x4 vertical exit. Requires coupler to attach 4x4 FiberRunner ® Channel and fittings to the vertical exit. Mounts directly to existing installation with no alteration required. Mounting hardware provided for secure attachment. (1 pc.) FRBC4X4YL 1 — N. Industrial O. Labeling & Identification Cover for Spill-Over Junction with 4x4 Exit for 6x4 Channel FRSPJC46YL FRSPJC46 Used to fully enclose 6x4 channel in conjunction with the spill-over junction FRSPJ4X4YL. Cover snaps onto the channel base. Hinged feature allows easy access to add or remove cables. For other colors replace suffix YL (Yellow) with OR (Orange) or BL (Black). L. Cabinets, Racks & Cable Management M. Grounding & Bonding Spill-Over Junction with 4x4 Exit FRSPJ4X4YL I. Physical Infrastructure Management J. Overhead & Underfloor Routing 2x2 FiberRunner ® Bend Radius Control Trumpet TRC2HDBL G. Outlets H. Media Distribution 2x2 Hinged Duct Vertical Cable Manager Kit FRHD2KTYL D. Power over Ethernet E. Zone Cabling 3-Sided BRC Trumpet Spillout for 2x2 Exit FTR2X2YL C. Fiber Optic Systems — 1 5 P. Cable Management Accessories Q. Index www.panduit.com Table continues on next page For service and technical support, call 866-405-6654 (outside the U.S. and Canada, see catalog back cover). J.29 A. System Overview PHYSICAL INFRASTRUCTURE SYSTEMS B. Copper Systems 6x4 FiberRunner ® System Spillouts (continued) C. Fiber Optic Systems Part Number D. Power over Ethernet Std. Std. Pkg. Ctn. Qty. Qty. 6x4 Dual Downspout FRDDS6X4YL E. Zone Cabling FRDDS6X4 F. Wireless Attaches to 6x4 channel and/or fittings to create two 90° 4x4 downward transitions from a horizontal run. Downspouts are positioned 600mm apart to provide drops into cable entrances on multiple cabinet line-ups. The fitting maintains a 2" bend radius control throughout the transition to the vertical downspouts. Includes two snap-on throat covers for the dual downspouts. Accepts optional cover FRDDSHC6YL. (2) FRBC6X4YL (2) FRBC4X4YL 1 — — 1 5 (1 pc.) FRBC4X4YL 1 5 1 5 1 5 Cover for 6x4 Dual Downspout FRDDSHC6YL G. Outlets Part Description Couplers Required FRDDSHC6 Used to fully enclose the 6x4 dual downspout fitting FRDDS6X4YL. Cover is attached to the fitting base with three hinge clips. The hinge clips allow the hinged cover to rotate to a fully closed position and an open position greater than 90°. 3-Sided BRC Trumpet Spillout for 4x4 FiberRunner ® Exit H. Media Distribution I. Physical Infrastructure Management FRTR4X4YL 2-Port Spillout to 1.5" (38mm) Inside Diameter Corrugated Tubing FRTR4X4 FRIDT4X4YL J. Overhead & Underfloor Routing K. Surface Raceway Used to route cable into one or two pieces of 1.5" (38mm) diameter split corrugated tubing. Requires coupler to be used with 4x4 FiberRunner ® Fitting. Used with any 4x4 FiberRunner ® Fitting. Securely holds corrugated split tubing to ensure system integrity and easy access to add or remove cables. (1 pc.) FRBC4X4YL 1-Port Spillout Side Exit to 1.5" (38mm) Inside Diameter Corrugated Tubing FRIDT4X4 L. Cabinets, Racks & Cable Management M. Grounding & Bonding Used to limit the bend radius of the cable to 2" (50.8mm) when exiting from 4x4 FiberRunner ® Channel or a 4x4 FiberRunner ® Horizontal Tee. FR1.5IDE FR1.5IDEYL Used to route cable into 1.5" (38mm) diameter split corrugated tubing directly through a hole cut in the side wall of the 4x4, 6x4, and 12x4 FiberRunner ® Channel or 4x4 Fiber-Duct ™ Channel. Provides 1" (25.4mm) bend radius control at the exit. Securely holds split corrugated tubing to ensure system integrity and easy access to add or remove cables. Includes drilling template. — For other colors replace suffix YL (Yellow) with OR (Orange) or BL (Black). N. Industrial O. Labeling & Identification P. Cable Management Accessories Q. Index Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD. A. System Overview PHYSICAL INFRASTRUCTURE SYSTEMS B. Copper Systems 6x4 FiberRunner ® System Spillouts (continued) Part Number Part Description Couplers Required Std. Std. Pkg. Ctn. Qty. Qty. 3-Sided BRC Trumpet Spillout for 6x4 Exit FRTR6X4YL Used to limit the bend radius of the cable to 2" (50.8mm) when exiting from 6x4 channel, 6x4 horizontal tee fitting, or 6x4 exit on 12x4 vertical tee. (1 pc.) FRBC6X4YL 1 5 FRUPS6X4YL D. Power over Ethernet E. Zone Cabling 6x4 Up Spout FRTR6X4 C. Fiber Optic Systems Allows cable to be directed upward out of the channel deployed directly below racks and cabinets in underfloor installations. Provides 2" (50.8mm) bend radius. Snaps directly onto the channel and can be positioned to allow cables to be laid in. A 1" (25.4mm) top bezel is included. Other fittings can be installed for specific applications including FTR4X4YL and FIDT4X4BL. — 1 5 F. Wireless G. Outlets FRUPS6X4 Innerduct Transition Fitting Metal fitting attaches to end of channel or fitting to transition up to four pieces of solid 1.5" (38mm) inside diameter inner duct. Hardware is included for installation. Black color only. FITF6X4 FITF6X4 1 10 H. Media Distribution 3-Port Spillout to 1.5" (38mm) Inside Diameter Corrugated Tubing FRIDT6X4YL FRIDT6X4 — Used to route cable into three separate pieces of 1.5" (38mm) diameter split corrugated tubing. Used with FRVT12X4YL or any 6x4 fitting. Securely holds corrugated split tubing to ensure system integrity and easy access to add or remove cables. For other colors replace suffix YL (Yellow) with OR (Orange) or BL (Black). (1 pc.) FRBC6X4YL 1 5 I. Physical Infrastructure Management J. Overhead & Underfloor Routing K. Surface Raceway L. Cabinets, Racks & Cable Management M. Grounding & Bonding N. Industrial O. Labeling & Identification P. Cable Management Accessories Q. Index www.panduit.com For service and technical support, call 866-405-6654 (outside the U.S. and Canada, see catalog back cover). J.31 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Panduit: FRSPJ2X2YL FRSPJC26YL