FVT-2201 하드웨어 버전: 1 10/100BASE-TX to 100BASE-FX SMF SC Converter, 20km The FVT-2201 SMF SC media converter is able to convert network signals between copper and fiber-optic based networks. The converter provides a 10/100Base-TX RJ-45 port, supports full duplex and half duplex switch connectivity and 10Base-T and 100Base-TX auto-sensing. Used in single-mode with fibre-optic cabling, this can extend a network range up to 20km. The device features built-in Dip switches for easy converter configuration, which function on the Smart LFP (Link Fault Pass-through), allowing the converter to monitor both the fiber and copper ports for signal loss, as well as converter transmission method, auto-negotiation mode for adjusting copper speed and full & half duplex mode. The FVT-2201 is able to operate in temperatures from -10° up to 55° Celsius. The converter can be used as a standalone unit or as a slide-in module to the CHV-2000 19-inch Converter Chassis, which can accommodate up to 14 units for use in a central wiring closet. Key Features - Transfers data from 10/100Base-TX copper to fiber interfaces Single-mode fiber with SC connector for transmission of up to 20km Built-in LFP (Link Fault Pass-through) Technology 신뢰성 있는 데이터 전송을 위해 IEEE 802.3x 플로우 제어가 패킷 손실을 방지 www.level1.com Page 1 of 4 - Dip switches for customized configuration Supports low-time lag transmission Supports the transmission of extra-long packets up to 1.6KB -10°C ~ 55°C operating temperature range 정상 작동 CVH-2000 14-Slot Media Converter Chassis FVT-2401 10/100BASE-TX to 100BASE-FX SMF SC Converter, 40km 제품사양 System Specifications Connectors and Cabling: Fiber Duplex SC (20km); RJ-45 Port CAT-5 Twisted Pair cable Auto MDI/MDI-X (Max to 100m) and Auto-Negotiation Wavelength(nm): 1310nm Indicator: PWR, TX (FDX, 100, Link/Act), FX (102, Link/Act) Transmission Method: Store and forward (Default) Power: DC 5V/1A Standards & Protocols: IEEE 802.3 10-BASE-T, Ethernet IEEE 802.3u 100-BASE-TX, Fast Ethernet IEEE 802.3ab 1000BASE-T, Gigabit Ethernet IEEE 802.3x Flow Control (full-duplex flow control) IEEE802.3z 1000Base-SX/LX, Physical Specifications Dimensions (W x D x H mm): 71 x 94 x 26 mm Weight (g): 420 g Performance Operating Distance: 20 km Features www.level1.com Page 2 of 4 General: DIP Switch 1: LFP function DIP Switch 2: Transmission Mode DIP Switch 3: Auto/Force the UTP port work mode DIP Switch 4: 10/100M for UTP port DIP Switch 5: Full/Half Duplex mode for UTP port DIP Switch 6: Normally close Environment Temperature (°C): Storage: -40 ~75 °C Operating: -10 ~ 55 °C Humidity (Non-condensing): 5 ~ 90 % Others Approval and Compliance: CE, FCC Deployment: Desk, wall and chassis mounted www.level1.com Page 3 of 4 도표 Order Information FVT-2201 Package Contents Power Adapter Quick Installation Guide 고해상도 이미지 CVH-2000 No responsibility for any errors or omissions. All mentioned brand names are registered trademarks and property of their owners. Copyright © Digital Data Communications GmbH, Germany. All Rights Reserved. www.level1.com Powered by TCPDF (www.tcpdf.org) Page 4 of 4