Sumida CDEPI1010NP-5R0PC Power inductor Datasheet

Power Inductors <SMD Type: CDEP I Series>
Type: CDEPI1010
◆ Product Description
・10.5×9.5mm Max. (L×W), 10.0mm Max. Height
・Inductance Range: 5.0μH~22μH; Rated Current Range: 2.8~7.1 A
◆ Feature
・Mn-Zn core used, High DC saturation current, High efficiency, Low heat generation.
・Dual inductors in one product.
・Ideally used in D Class Amplifiers.
・RoHS Compliance.
◆ Dimensions (mm)
10.0 MAX.
6.2
3.3
9.5 Max.
2.2
10.5 Max.
STAND OFF 0.1+0.1
-0.05
* Dimension without tolerance is approx.
◆ Land Pattern (mm)
◆ Schematics (Bottom)
②
③
①
④
Please refer to the sales offices on our website for a representative near you
www.sumida.com
1/2
Power Inductors <SMD Type: CDEP I Series>
Type: CDEPI1010
◆
Specification
Part Name
Stamp
Inductance
[Within]
100kHz/1V
1-2 Or 4-3
1-2 Or 4-3
Saturation
Current
(A) ※1
Temperature
Rise Current
(A) ※2
D.C.R.(mΩ)
Max.(Typ.) (at 20℃)
CDEPI1010NP-5R0PC
5R0
5.0μH±25%
13 (10)
7.6
7.1
CDEPI1010NP-100MC
100
10μH±20%
26 (21)
5.4
4.0
CDEPI1010NP-120MC
120
12μH±20%
29 (23)
4.8
3.9
CDEPI1010NP-150MC
150
15μH±20%
43 (34)
4.5
3.4
CDEPI1010NP-180MC
180
18μH±20%
49 (39)
4.1
3.1
CDEPI1010NP-220MC
220
22μH±20%
51 (41)
3.7
2.8
※1.Saturation Current: The DC current at which the inductance decreases to 75% of its initial value.
※2.Temperature Rise Current: The DC current at which the temperature rise is △t=40℃ (Ta=20℃) .
Please refer to the sales offices on our website for a representative near you
www.sumida.com
2/2
Similar pages