Frontier Electronics Corp. 667 E. COCHRAN STREET, SIMI VALLEY, CA 93065 TEL: (805) 522-9998 FAX: (805) 522-9989 E-mail: [email protected] Web: http://www.frontierusa.com 2A FAST EFFICIENT SURFACE MOUNT RECTIFIER ES2A-LFR THRU ES2J-LFR FEATURES z LOW PROFILE PACKAGE z PLASTIC PACKAGE HAS UNDERWRITERS LABORATORY 94V-0 z IDEAL FOR SURFACE MOUNTED APPLICATION z GLASS PASSIVATED CHIP JUNCTION z BUILT-IN STRAIN RELIEF DESIGN z FAST EFFICIENT RECOVERY TIME FOR HIGH EFFICIENT z HIGH TEMPERATURE SOLDERING: 250°C/10 SECONDS AT TERMINAL z ROHS CATHODE .086(2.20) .077(1.96) .220(5.59) .205(5.21) .180(4.57) .160(4.06) .155(3.94) .130(3.30) .096(2.44) .084(2.13) MECHANICAL DATA z CASE: JEDEC DO-214AA (SMB), MOLDED PLASTIC BODY, DIMENSIONS IN INCHES AND (MILLIMETERS) z TERMINAL: SOLDER PLATED, SOLDERABLE PER MIL-STD750 METHOD 2026 z POLARITY: COLOR BAND DENOTES CATHODE z WEIGHT:0.093 GRAMS .060(1.52) .030(0.76) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS RATINGS AT 25°C AMBIENT TEMPERATURE UNLESS OTHERWISE SPECIFIED SINGLE PHASE, HALF WAVE, 60 HZ, RESISTIVE OR INDUCTIVE LOAD. FOR CAPACITIVE LOAD, DERATE CURRENT BY 20% RATINGS SYMBOL ES2A-LFR ES2B-LFR ES2D-LFR ES2E-LFR ES2G-LFR ES2J-LFR UNITS MAXIMUM RECURRENT PEAK REVERSE VOLTAGE MAXIMUM RMS VOLTAGE MAXIMUM DC BLOCKING VOLTAGE MAXIMUM AVERAGE FORWARD RECTIFIED CURRENT AT TL=90°C PEAK FORWARD SURGE CURRENT, 8.3ms SINGLE HALF SINE-WAVE SUPERIMPOSED ON RATED LOAD TYPICAL JUNCTION CAPACITANCE (NOTE 1) VRRM VRMS VDC TYPICAL THERMAL RESISTANCE (NOTE 2) STORAGE TEMPERATURE RANGE OPERATING TEMPERATURE RANGE 50 35 50 100 70 100 200 140 200 300 210 300 400 280 400 600 420 600 V V V IO 2.0 A IFSM 50 A CJ 25 PF RθjL 20 ℃/W TSTG - 55 TO + 150 ℃ TOP - 55 TO + 150 ℃ ELECTRICAL CHARACTERISTICS (AT TA =25°C UNLESS OTHERWISE NOTED) CHARACTERISTICS SYMBOL ES2A-LFR ES2B-LFR ES2D-LFR ES2E-LFR ES2G-LFR ES2J-LFR UNITS MAXIMUM FORWARD VOLTAGE AT IO DC VF MAXIMUM REVERSE CURRENT AT 25℃ IR 0.98 10 1.25 μA MAXIMUM REVERSE CURRENT AT 100℃ IR 150 μA MAXIMUM REVERSE RECOVERY TIME (NOTE 3) TRR 25 MARKING ES2A ES2B ES2D ES2E NOTE: 1. MEASURED AT 1 MHZ AND APPLIED REVERSE VOLTAGE 0F 4.0 VOLTS 2. THERMAL RESISTANCE FROM JUNCTION TO AMBIENT AND JUNCTION TO LEAD P.C.B. MOUNTED ON 0.3×0.3”(8.0×8.0mm) COPPER PAD AREAS 3. REVERSE RECOVERY TEST CONDITIONS: IF=0.5A, IR=1.0A, IRR=0.25A ES2A-LFR THRU ES2J-LFR 1.75 V nS ES2G Page: 1 ES2J RATINGS AND CHARACTERISTIC CURVE ES2A-LFR THRU ES2J-LFR FIG. 1-TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTIC FIG. 2-TYPICAL FORWARD CURRENT DERATING CURVE Trr 100Ω NO INDUCTIVE 50Ω NO INDUCTIVE 3.0 AVERAGE FORWARD CURRENT (A) +0.5A (-) D.U.T. 0 PULSE GENERATOR ( NOTE 2 ) (+) 25 Vdc (approx) 1Ω NON INDUCTIVE (-) OSCILLOSCOPE ( NOTE 1 ) -0.25A (+) -1.0A SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 2.0 1.0 P.C.B MOUNTED ON 0.3×0.3”(8.0×8.0mm) COPPER PAD AREAS 0 1cm NOTE: 1. RISE TIME=7ns MAX. INPUT IMPEDANCE=1 MOhms 22PF 2. RISE TIME =10ns MAX. SOURCE IMPEDANCE=50 OHMS SET TIME BASE FOR 10/20 ns/cm FIG. 4-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 1000 INSTANTANEOUS FORWARD CURRENT (A) INSTANTANEOUS REVERSE CURRENT (uA) FIG. 3-TYPICAL REVERSE CHARACTERISTICS 100 100 1010 TJ=125oC 1.0 1 TJ=80oC 0.1 0.1 TJ=25oC 0.01 .01 20 40 20 40 60 80 100 120 140 160 180 200 LEAD TEMPERATURE (oC) 10.0 ES2A-LF ~ES2D-LF 1.0 ES2E-LF ~ES2G-LF .1 .01 ES2J-LF .001 .4 60 80 100 120 140 .6 .8 1.0 1.2 1.4 1.6 1.8 2.0 INSTANTANEOUS FORWARD VOLTAGE (V) PERCENT OF RATED PEAK REVERSE VOLTAGE (%) FIG. 6-TYPICAL JUNCTION CAPACITANCE FIG. 5-MAXIMUN NON-REPETITIVE FORWARD SURGE CURRENT 200 8.3 ms Single Half Sine Wave (JEDEC Method) 60 100 JUNCTION CAPACITANCE (pF) PEAK FORWARD SURGE CURRENT (A) 70 50 40 30 20 10 40 TJ=25oC 20 10 6 4 2 1 0 1 5 10 20 50 100 NUMBER OF CYCLES AT 60 Hz ES2A-LFR THRU ES2J-LFR .1 .2 .4 1.0 2 4 10 20 40 100 REVERSE VOLTAGE (V) Page: 2