Caliber F11J20E3 1.3mm /1.1mm ceramic surface mount crystal Datasheet

F, F11, FMT, FMT11 Series
1.3mm /1.1mm Ceramic Surface Mount Crystals
PART NUMBERING GUIDE
C A L I B E R
Lead-Free
RoHS Compliant
Electronics Inc.
Environmental/Mechanical Specifications on page F5
FMT11 D 20 C 1 29.4912MHz
Package
F
= 1.3mm max. ht. / Ceramic Glass Sealed Package
F11
= 1.1mm max. ht. / Ceramic Glass Sealed Package
FMT = 1.3mm max. ht. / Seam Weld “Metal Lid” Package
FMT11 = 1.1mm max. ht./ Seam Weld “Metal Lid” Package
Tolerance/Stability
A=±50/100
G=±20/10
B=±50/50
H=±10/10
C=±30/50
J =±10/20
D=±20/30
E=±15/30
F=±10/50
Mode of Operation
1=Fundamental
3=Third Overtone
5=Fifth Overtone
Operating Temperature Range
C=0°C to 70°C
E=-20°C to 70°C
F=-40°C to 85°C
Load Capacitance
S=Series, XX=XXpF (Pico Farads)
ELECTRICAL SPECIFICATIONS
Revision: 1996-D
Frequency Range
8.000MHz to 150.000MHz
Frequency Tolerance/Stability
A, B, C, D, E, F
See above for details!
Other Combinations Available. Contact Factory for Custom Specifications.
Operating Temperature Range
“C” Option, “E” Option, “F” Option
0°C to 70°C, -20°C to 70°C, -40°C to 85°C
Aging @ 25°C
±3ppm / year Maximum
Storage Temperature Range
-55°C to 125°C
Load Capacitance
“S” Option
“XX” Option
Series
8pF to 50pF
Shunt Capacitance
7pF Maximum
Insulation Resistance
500 Megaohms Minimum at 100Vdc
Drive Level
1mW Maximum, 100uW correlation
EQUIVALENT SERIES RESISTANCE (ESR)
Frequency (MHz)
ESR (ohms)
Frequency (MHz)
ESR (ohms)
9.000 to 10.999
60
35.000 to 39.990 (3rd OT)
60
11.000 to 13.999
50
40.000 to 49.990 (3rd OT)
60
14.000 to 15.999
40
50.000 to 89.999 (3rd OT)
60
16.000 to 40.000
30
90.000 to 150.000
100
MECHANICAL DIMENSIONS
Marking Guide
Line 1:
Line 2:
CEI =
YM =
All Dimensions in mm.
2.54 ±0.20
Kovar Lid for
“FMT Series”
5.00
±0.20
4
7.00
+0.30
-0.20
4
1
3
2
“H Dimension”
1.00 ±0.20 (X4)
Ceramic Base all
TEL 949-366-8700
1
4.60
±0.20
3
Frequency
CEI YM
Caliber Electronics
Date Code (year/month)
2
Pad Connection
1 Crystal In/OUt
2 Ground
3 Crystal in/Out
4 Ground
NOTE: Dimensions for Specific Packages
H = 1.3 Maximum for “F Series”
H = 1.3 Maximum for “FMT Series” / “Metal Lid”
H = 1.1 Maximum for “F11 Series”
H = 1.1 Maximum for “FMT11 Series” / “Metal Lid”
FAX 949-366-8707
WEB http://www.caliberelectronics.com
Similar pages