USB-Disk ModuleⅡ AP-UMxxxxXXXXG-XXXX RoHS Compliant USB-Disk ModuleⅡ Specification April 23, 2009 Version 1.5 Apacer Technology Inc. th th 4 Fl., 75 Xintai 5 Rd., Sec.1, Hsichih, Taipei Hsien 221, Taiwan Tel: +886-2-2698-2888 Fax: +886-2-2698-2889 www.apacer.com 1 © 2009 Apacer Technology, Inc. Rev. 1.5 USB-Disk ModuleⅡ AP-UMxxxxXXXXG-XXXX FEATURES: • USB2.0 High-Speed and USB1.1 FullSpeed compatible interface • Capacity 256, 512 MB 1, 2, 4, 8 GB • – – – Fast sustained read performance Sustained read: 30 MB/s – Fast sustained write performance Sustained write: 20 MB/s • • • • – – 1. 2. – – – – Support boot-up function for OS Windows XP Embedded Windows CE Linux 1 Windows XP Professional – – – Temperature ranges 0°C to 70°C for operation (standard) 2 -40°C to 85°C for operation (ET ) -40°C to 100°C for storage – – Low power consumption (typical) Active mode: 110 mA Sleep mode: 450 μA – Connector 10-pin (2x5) female header • Intelligent USB Module Implements dynamic wear-leveling algorithms to substantially increase longevity of flash media – BCH (6/12 bit) Error Detection Code/Error Correction Code (EDC/ECC) – Intrinsic data integrity after power loss – Wear leveling algorithm that provides more reliable data storage over an extended period • Support Ready Boost for Windows Vista • – • • • Zero Power Data Retention Batteries not required for data storage RoHS Compliant Extended Data Protection (Optional) Write protection setting by jumper for prevention of data overwrites. Please order NR type. Only support Standard Temperature 2GB, 4GB, 8GB capacity Extended Temperature 2 © 2009 Apacer Technology, Inc. Rev. 1.5 USB-Disk ModuleⅡ AP-UMxxxxXXXXG-XXXX TABLE OF CONTENTS 1. General Description ..............................................................................4 1.1 Performance-optimized Controller....................................................................................................... 4 1.1.1 Power Management Unit (PMU) ...................................................................................................................4 1.1.2 SRAM Buffer .................................................................................................................................................4 1.1.3 Error Correction Code (ECC) ........................................................................................................................4 1.1.4 Wear-Leveling ...............................................................................................................................................4 1.1.5 Write Protection Mode (Optional) ..................................................................................................................4 2. Functional Block Diagram.....................................................................5 3. Pin Assignment......................................................................................6 3.1 Type A, Type B, Type C, and Type E.................................................................................................. 6 3.2 Type D﹙STD﹚................................................................................................................................... 7 3.3 Type D﹙LP﹚ ..................................................................................................................................... 8 4. Capacity Specifications ........................................................................9 4.1 Functional Specifications..................................................................................................................... 9 4.2 Environmental Specifications .............................................................................................................. 9 5. Electrical Specification ......................................................................10 6. Physical Dimension .............................................................................11 6.1 Horizontal Design .............................................................................................................................. 11 6.1.1 Type A (STD 90D)......................................................................................................................................11 6.1.2 Type B (STD 90D-MH) ...............................................................................................................................12 6.1.3 Type C (STD 90D-MS) ...............................................................................................................................13 6.2 Vertical Design .................................................................................................................................. 14 6.2.1 Type D (STD 180D)....................................................................................................................................14 6.3 Low Profile Design............................................................................................................................. 15 6.3.1 Type D (LP 180D) .......................................................................................................................................15 6.3.2 Type E (LP 90D-MS) ...................................................................................................................................16 7. Product Ordering Information.............................................................17 7.1 Product Code Designation ................................................................................................................ 17 7.2 Valid Combinations............................................................................................................................ 18 7.2.1 Type A 7.2.2 Type B 7.2.3 Type C 7.2.4 Type D 7.2.5 Type D 7.2.6 Type E (STD 90D)......................................................................................................................................18 (STD 90D-MH) ...............................................................................................................................18 (STD 90D-MS) ...............................................................................................................................18 (STD 180D)....................................................................................................................................19 (LP 180D) ......................................................................................................................................19 (LP 90D-MS) ..................................................................................................................................19 3 © 2009 Apacer Technology, Inc. Rev. 1.5 USB-Disk ModuleⅡ AP-UMxxxxXXXXG-XXXX 1. General Description Apacer’s USB-Disk Module (UDM) is a high performance, embedded solid state drive (SSD) designed to replace a conventional IDE hard disk drive. UDM SSD can be plugged into a standard Embedded USB connector commonly found in desktops, portable PC systems and industrial PC systems. This product is well suited for embedded flash storage applications offering new and expanded functionality as well as more cost-effective designs, better performance and increased reliability. 1.1 Performance-optimized Controller The heart of an UDM is the USB controller, which translates standard USB signals into the data and controls of the flash media. This proprietary USB controller is specifically designed to attain high data throughput from host to flash. 1.1.1 Power Management Unit (PMU) The power management unit (PMU) controls the power consumption of the UDM. It can dramatically extend product battery life by leaving the idle part of the circuitry into sleep mode. The PMU has zero wake-up latency. 1.1.2 SRAM Buffer The SRAM buffer is a key contributor to the USB controller performance. It optimizes data writes to the flash. 1.1.3 Error Correction Code (ECC) The UDM uses BCH Error Detection Code (EDC) and Error Correction Code (ECC) algorithms which correct up to 6/12 random single-bit errors for each 512-byte block of data depending on spare area of flash memory. High performance is achieved through hardware-based error detection and correction. 1.1.4 Wear-Leveling Flash memory can be erased a limited number of times, This number is called the erase cycle limit, or write endurance limit, The erase cycle limit applies to each individual erase block in the flash device. In a typical application, and especially if a file system is used, specific pages are constantly updated (e.g., the page that contains the FAT, registry, etc.). Without any special handling, these pages would wear out more rapidly than other pages, reducing the lifetime of the entire flash. To overcome this inherent deficiency, Apacer’s USB-Disk Module (UDM) uses wear-leveling algorithm. This wear-leveling algorithm ensures that consecutive writes of a specific sector are not written physically to the same page in the flash. This spreads flash media usage evenly across all pages, thereby maximizing flash lifetime. The wear-leveling mechanism provides more than 100,000 write/erase cycles for reliable data storage over an extended period. 1.1.5 Write Protection Mode (Optional) When the device is configured to the Write-Protection mode, it enhances the data security and protection. This feature prevents the stored data from inadvertent system writes or erases, and viruses. 4 © 2009 Apacer Technology, Inc. Rev. 1.5 USB-Disk ModuleⅡ AP-UMxxxxXXXXG-XXXX 2. Functional Block Diagram The USB-Disk Module (UDM) contains a controller, embedded firmware, and Flash Media with a female connector. The UDM interfaces with the host system allowing data to be written to and read from the Flash Media. Flash Media Host USB Interface Flash Management Controller Flash Media Figure 2-1: Functional block diagram 5 © 2009 Apacer Technology, Inc. Rev. 1.5 USB-Disk ModuleⅡ AP-UMxxxxXXXXG-XXXX 3. Pin Assignment This chapter provides the information on the pin assignments and signal descriptions. 3.1 Type A, Type B, Type C, and Type E Table 3-1: Pin Assignment of the 10-pin configuration in Type A, Type B, Type C, and Type E Pin Signal Pin Signal 1 +5V 2 N.C 3 USB D- 4 N.C 5 USB D+ 6 N.C 7 GND 8 N.C 9 Key (Blocked) 10 N.C 6 © 2009 Apacer Technology, Inc. Rev. 1.5 USB-Disk ModuleⅡ AP-UMxxxxXXXXG-XXXX 3.2 Type D﹙ ﹙STD﹚ ﹚ Table 3-2: Pin Assignment of the 10-pin configuration in Type D (STD) Pin Signal Pin Signal 1 +5V 2 +5V 3 USB D- 4 N.C 5 USB D+ 6 N.C 7 GND 8 GND 9 Key (Blocked) 10 GND 7 © 2009 Apacer Technology, Inc. Rev. 1.5 USB-Disk ModuleⅡ AP-UMxxxxXXXXG-XXXX 3.3 Type D﹙ ﹙LP﹚ ﹚ Table 3-3: Pin Assignment of the 10-pin configuration in Type D (LP) Pin Signal Pin Signal 1 +5V 2 N.C 3 USB D- 4 N.C 5 USB D+ 6 N.C 7 GND 8 N.C 9 Key (Blocked) 10 N.C 8 © 2009 Apacer Technology, Inc. Rev. 1.5 USB-Disk ModuleⅡ AP-UMxxxxXXXXG-XXXX 4. Capacity Specifications The USB-Disk Module product family is available as below table matrix. Table 4-1: Capacity Specification Density Total Bytes 256MB 253,739,008 512 MB 511,688,704 1GB 1,027,588,096 2GB 2,059,386,880 4GB 4,118,790,144 8GB 8,237,596,672 4.1 Functional Specifications Table 4-2: Performance Specifications USB 2.0 High-Speed (Max.) Sustained Read 30 MB/sec Sustained Write 20 MB/sec 4.2 Environmental Specifications Environmental specification of the USB-Disk Module (UDM) product family which follows the MIL-STD810F standards is available as shown in Table 4-2. Table 4-2: Environmental Specifications Temperature Operation Storage 0°C to 70°C (standard); -40°C to 85°C (extended temperature) -40°C to 100°C Vibration 10 Hz to 500 Hz, 15G, 3 axes, 30 minutes (IEC 68-2-6) Shock Duration: 11 ms, 50G, 3 axes, 18 times (IEC 68-2-27) EMC FCC, CE 9 © 2009 Apacer Technology, Inc. Rev. 1.5 USB-Disk ModuleⅡ AP-UMxxxxXXXXG-XXXX 5. Electrical Specification Caution: Absolute Maximum Stress Ratings – Applied conditions greater than those listed under “Absolute Maximum Stress Ratings” may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these conditions or conditions greater than those defined in the operational sections of this data sheet is not implied. Exposure to absolute maximum stress rating conditions may affect device reliability. Table 5-1: Operating Range Range Ambient Temperature Voltage Standard Extended Temperature 0°C to 70°C -40°C to 85°C 4.5-5.5V Table 5-2: Absolute maximum power pin stress ratings Parameter Power Supply Input Voltage on any pin except VDD with respect to GND Symbol Min Max Unit VDD VIN -0.3 -0.3 5.5 5.8 V V 10 © 2009 Apacer Technology, Inc. Rev. 1.5 USB-Disk ModuleⅡ AP-UMxxxxXXXXG-XXXX 6. Physical Dimension 6.1 Horizontal Design 6.1.1 Type A (STD 90D) Standard 90 degree Length 28.8mm Width 26.65mm Height (Max) 10.5 mm Unit: mm Tolerance: ±0.2 11 © 2009 Apacer Technology, Inc. Rev. 1.5 USB-Disk ModuleⅡ AP-UMxxxxXXXXG-XXXX 6.1.2 Type B (STD 90D-MH) Standard 90 Degree Mounting Header Length 37.8mm Width 26.65mm Height (Max) 10.5 mm Unit: mm Tolerance: ±0.2 12 © 2009 Apacer Technology, Inc. Rev. 1.5 USB-Disk ModuleⅡ AP-UMxxxxXXXXG-XXXX 6.1.3 Type C (STD 90D-MS) Standard 90 Degree Mounting Screw Length 37.8mm Width 26.65mm Height (Max) 10.5 mm Unit: mm Tolerance: ±0.2 13 © 2009 Apacer Technology, Inc. Rev. 1.5 USB-Disk ModuleⅡ AP-UMxxxxXXXXG-XXXX 6.2 Vertical Design 6.2.1 Type D (STD 180D) Standard 180 Degree Length 37.3mm Width 26.65mm Height (Max) 8.5 mm Unit: mm Tolerance: ±0.2 14 © 2009 Apacer Technology, Inc. Rev. 1.5 USB-Disk ModuleⅡ AP-UMxxxxXXXXG-XXXX 6.3 Low Profile Design 6.3.1 Type D (LP 180D) Low Profile 180 Degree Length 31.95mm Width 24mm Height (Max) 5 mm Unit: mm Tolerance: ±0.2 15 © 2009 Apacer Technology, Inc. Rev. 1.5 USB-Disk ModuleⅡ AP-UMxxxxXXXXG-XXXX 6.3.2 Type E (LP 90D-MS) Low Profile 90 Degree Mounting Screw Length Write Protect 36.8mm Width 26.5mm Height (Max) 7.5 mm Read/Write Unit: mm Tolerance: ±0.2 16 © 2009 Apacer Technology, Inc. Rev. 1.5 USB-Disk ModuleⅡ AP-UMxxxxXXXXG-XXXX 7. Product Ordering Information 7.1 Product Code Designation AP – U M xxxx X X X X G – XX XX Option: RB: Ready Boost WP: Write Protection NR: Non-Removable MH: Mounting Header MS: Mounting Screw RoHS Compliant Temperature: C: Commercial Temperature E: Extended Temperature PCB version Diemension 1 = 90D STD 2 = 180D STD 3 = 90D Low Profile 4 = 180D Low Profile Solution version Capacity 256M = 256MB 512M = 512MB 001G = 1GB 002G = 2GB 004G = 4GB 008G = 8GB Model Name Apacer Product Code 17 © 2009 Apacer Technology, Inc. Rev. 1.5 USB-Disk ModuleⅡ AP-UMxxxxXXXXG-XXXX 7.2 Valid Combinations 7.2.1 Type A (STD 90D) Standard 90 degree Capacity Standard Extended Temperature 256MB AP-UM256ME10CG AP-UM256MD10EG 512MB AP-UM512ME10CG AP-UM512MD10EG 1GB AP-UM001GE10CG AP-UM001GD10EG 2GB AP-UM002GE10CG AP-UM002GD10EG 4GB AP-UM004GE10CG AP-UM004GD10EG 8GB AP-UM008GE10CG AP-UM008GD10EG 7.2.2 Type B (STD 90D-MH) Standard 90 Degree Mounting Header Capacity Standard Extended Temperature 256MB AP-UM256ME10CG-MH AP-UM256MD10EG-MH 512MB AP-UM512ME10CG-MH AP-UM512MD10EG-MH 1GB AP-UM001GE10CG-MH AP-UM001GD10EG-MH 2GB AP-UM002GE10CG-MH AP-UM002GD10EG-MH 4GB AP-UM004GE10CG-MH AP-UM004GD10EG-MH 8GB AP-UM008GE10CG-MH AP-UM008GD10EG-MH 7.2.3 Type C (STD 90D-MS) Standard 90 Degree Mounting Screw Capacity Standard Extended Temperature 256MB AP-UM256ME10CG-MS AP-UM256MD10EG-MS 512MB AP-UM512ME10CG-MS AP-UM512MD10EG-MS 1GB AP-UM001GE10CG-MS AP-UM001GD10EG-MS 2GB AP-UM002GE10CG-MS AP-UM002GD10EG-MS 4GB AP-UM004GE10CG-MS AP-UM004GD10EG-MS 8GB AP-UM008GE10CG-MS AP-UM008GD10EG-MS 18 © 2009 Apacer Technology, Inc. Rev. 1.5 USB-Disk ModuleⅡ AP-UMxxxxXXXXG-XXXX 7.2.4 Type D (STD 180D) Standard 180 Degree Capacity Standard Extended Temperature 256MB AP-UM256ME20CG AP-UM256MD20EG 512MB AP-UM512ME20CG AP-UM512MD20EG 1GB AP-UM001GE20CG AP-UM001GD20EG 2GB AP-UM002GE20CG AP-UM002GD20EG 4GB AP-UM004GE20CG AP-UM004GD20EG 8GB AP-UM008GE20CG AP-UM008GD20EG 7.2.5 Type D (LP 180D) Low Profile 180 Degree Capacity Standard Extended Temperature 256MB AP-UM256ME40CG AP-UM256MD40EG 512MB AP-UM512ME40CG AP-UM512MD40EG 1GB AP-UM001GE40CG AP-UM001GD40EG 2GB AP-UM002GE40CG AP-UM002GD40EG 4GB AP-UM004GE40CG AP-UM004GD40EG 8GB AP-UM008GE40CG AP-UM008GD40EG 7.2.6 Type E (LP 90D-MS) Low Profile 90 Degree Mounting Screw Capacity Standard Extended Temperature 256MB AP-UM256ME31CG-MS AP-UM256MD31EG-MS 512MB AP-UM512ME31CG-MS AP-UM512MD31EG-MS 1GB AP-UM001GE31CG-MS AP-UM001GD31EG-MS 2GB AP-UM002GE31CG-MS AP-UM002GD31EG-MS 4GB AP-UM004GE31CG-MS AP-UM004GD31EG-MS 8GB AP-UM008GE31CG-MS AP-UM008GD31EG-MS Note: Valid combinations are those products in mass production or will be in mass production. Consult your Apacer sales representative to confirm availability of valid combinations and to determine availability of new combinations. 19 © 2009 Apacer Technology, Inc. Rev. 1.5 USB-Disk ModuleⅡ AP-UMxxxxXXXXG-XXXX Revision History Revision Description Date 1.0 Official Release May 5, 2008 1.1 Product Ordering Information Updated September 30, 2008 1.2 Pin Assignment Updated December 17, 2008 1.3 Type E dimension & ECC capability updated March 18, 2009 1.4 Feature Context & Product Ordering Information updated April 21, 2009 1.5 Type D (LP 180D) drawing updated April 23, 2009 20 © 2009 Apacer Technology, Inc. Rev. 1.5 USB-Disk ModuleⅡ AP-UMxxxxXXXXG-XXXX Global Presence Taiwan (Headquarters) Apacer Technology Inc. th th 4 Fl., 75 Xintai 5 Rd., Sec.1 Hsichih, Taipei Hsien 221 Taiwan, R.O.C. Tel: +886-2-2698-2888 Fax: +886-2-2698-2889 [email protected] U.S.A. Apacer Memory America, Inc. 386 Fairview Way, Suite102, Milpitas, CA 95035 Tel: 1-408-586-1291 Fax: 1-408-935-9611 [email protected] Japan Apacer Technology Corp. 5F, Matsura Bldg., Shiba, Minato-Ku Tokyo, 105-0014, Japan Tel: 81-3-5419-2668 Fax: 81-3-5419-0018 [email protected] Europe Apacer Technology B.V. Europalaan 89 5232 BC 'S-Hertogenbosch The Netherlands Tel: 31-73-645-9620 Fax: 31-73-645-9629 [email protected] China Apacer Electronic (Shanghai) Co., Ltd 1301, No.251,Xiaomuqiao Road, Shanghai, 200032, China Tel: 86-21-5529-0222 Fax: 86-21-5206-6939 [email protected] India Apacer Technologies Pvt. Ltd. #143, 1st Floor, Raheja Arcade, 5th Block Kormangala Industrial Layout, Bangalore - 560095, India Tel: 91-80-4152-9061 [email protected] 21 © 2009 Apacer Technology, Inc. Rev. 1.5 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Apacer: AP-UM001GD10EG-MH AP-UM001GD10EG-MS AP-UM001GD31EG-MS AP-UM002GD10EG-MH APUM002GD31EG-MS AP-UM004GD10EG-MH AP-UM004GD10EG-MS AP-UM004GD31EG-MS AP-UM008GD10EGMH AP-UM008GD10EG-MS AP-UM008GD31EG-MS AP-UM256MD10EG-MH AP-UM256MD10EG-MS APUM256MD31EG-MS AP-UM512MD10EG-MH AP-UM512MD10EG-MS AP-UM512MD31EG-MS