DFLS240L 2.0A LOW VF SCHOTTKY BARRIER RECTIFIER PowerDI®123 Please click here to visit our online spice models database. Features • • • • • • • Mechanical Data • • Guard Ring Die Construction for Transient Protection Low Power Loss, High Efficiency High Surge Capability High Current Capability and Low Forward Voltage Drop Lead Free Finish, RoHS Compliant (Note 4) "Green" Molding Compound (No Br, Sb) Qualified to AEC-Q101 Standards for High Reliability ® Case: PowerDI 123 Case Material: Molded Plastic, "Green" Molding Compound. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminal Connections: Cathode Band Terminals: Finish – Matte Tin Annealed Over Copper leadframe. Solderable per MIL-STD-202, Method 208 Marking Information: See Page 2 Ordering Information: See Page 2 Weight: 0.01 grams (approximate) • • • • • • Top View Maximum Ratings @TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Forward Current Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load Symbol VRRM VRWM VR VR(RMS) IF(AV) Value Unit 40 V 28 2.0 V A IFSM 50 A Thermal Characteristics Characteristic Power Dissipation (Note 1) Power Dissipation (Note 2) Thermal Resistance Junction to Ambient (Note 1) Thermal Resistance Junction to Ambient (Note 2) Thermal Resistance Junction to Soldering (Note 3) Operating Temperature Range (See figure 4) Storage Temperature Range Electrical Characteristics Characteristic Reverse Breakdown Voltage (Note 5) Forward Voltage Symbol PD PD RθJA RθJA RθJS TJ TSTG Symbol V(BR)R VF IR Total Capacitance CT 1. 2. 3. 4. 5. Max 1.67 556 ⎯ ⎯ 5 Unit W mW °C/W °C/W °C/W °C °C -55 to +125 -55 to +150 @TA = 25°C unless otherwise specified Leakage Current (Note 5) Notes: Typ ⎯ ⎯ 60 180 ⎯ Min 40 ⎯ ⎯ ⎯ Typ ⎯ 0.4 0.45 0.50 Max ⎯ 0.45 0.50 0.65 Unit V ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ 90 0.1 10 0.05 5 mA ⎯ pF V Test Condition IR = 500μA IF = 1.0A IF = 2.0A IF = 3.0A VR = 40V VR = 40V, TJ = 85°C VR = 20V VR = 20V, TJ = 85°C VR = 10V, f = 1.0MHz Part mounted on 50.8mm X 50.8mm GETEK board with 25.4mm X 25.4mm copper pad, 25% anode, 75% cathode. Part mounted on FR-4 board with 1.8mm X 2.5mm cathode and 1.8mm X 1.2mm anode, 1 oz. copper pads. Theoretical RθJS calculated from the top center of the die straight down to the PCB cathode tab solder junction. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied. Please visit our website at http://www.diodes.com/products/lead_free.html. Short duration pulse test used to minimize self-heating effect. PowerDI is a registered trademark of Diodes Incorporated. 1 of 4 DFLS240L Document number: DS30516 Rev. 8 - 2 www.diodes.com November 2009 © Diodes Incorporated 10,000 1,000 IR, INSTANTANEOUS REVERSE CURRENT (µA) IF, INSTANTANEOUS FORWARD CURRENT (mA) DFLS240L T A = 125 ° C TA = 100° C 100 10 TA = 85° C TA = 25° C 1 TA = -55° C 0.1 10,000 TA = 125° C 1,000 T A = 25° C 1.0 TA = -55° C 0.1 0.01 0 0.8 0.6 0.2 0.4 0 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 1 Typical Forward Characteristics 35 5 10 15 20 25 30 40 VR, INSTANTANEOUS REVERSE VOLTAGE (V) Fig. 2 Typical Reverse Characteristics 135 TA, DERATED AMBIENT TEMPERATURE (°C) 400 CT, TOTAL CAPACITANCE (pF) TA = 100° C 10 450 350 300 250 200 150 100 50 0 0 125 115 105 8 16 24 32 40 VR, DC REVERSE VOLTAGE (V) Fig. 3 Total Capacitance vs. Reverse Voltage Ordering Information 95 85 75 65 55 45 35 25 0 8 32 16 24 VR, DC REVERSE VOLTAGE (V) Fig. 4 Operating Temperature Derating 40 (Note 6) Part Number DFLS240L-7 Notes: TA = 85° C 100 Case ® PowerDI 123 Packaging 3000/Tape & Reel 6. For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. F06A Date Code Key Year Code Month Code 2004 R Jan 1 2005 S Feb 2 2006 T Mar 3 Apr 4 YM Marking Information F06A = Product Type Marking Code YM = Date Code Marking Y = Year (ex: T = 2006) M = Month (ex: 9 = September) 2007 U May 5 2008 V Jun 6 PowerDI is a registered trademark of Diodes Incorporated. 2 of 4 DFLS240L Document number: DS30516 Rev. 8 - 2 www.diodes.com 2009 W Jul 7 Aug 8 2010 X Sep 9 2011 Y Oct O 2012 Z Nov N Dec D November 2009 © Diodes Incorporated DFLS240L Package Outline Dimensions B ® C PowerDI 123 Dim Min Max Typ A 3.50 3.90 3.70 B 2.60 3.00 2.80 C 1.63 1.93 1.78 D 0.93 1.00 0.98 E 0.85 1.25 1.00 H 0.15 0.25 0.20 L 0.55 0.75 0.65 L1 1.80 2.20 2.00 L2 0.95 1.25 1.10 All Dimensions in mm E D H L L1 L2 E A Suggested Pad Layout X1 Y2 G X2 Y1 PowerDI is a registered trademark of Diodes Incorporated. 3 of 4 DFLS240L Document number: DS30516 Rev. 8 - 2 www.diodes.com Dimensions G X1 X2 Y1 Y2 Value (in mm) 1.0 2.2 0.9 1.4 1.4 November 2009 © Diodes Incorporated DFLS240L IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2009, Diodes Incorporated www.diodes.com PowerDI is a registered trademark of Diodes Incorporated. 4 of 4 DFLS240L Document number: DS30516 Rev. 8 - 2 www.diodes.com November 2009 © Diodes Incorporated