Roithner LFO-18-IP Hermetically sealed modules are performed Datasheet

1.53 ÷ 1.57
!m
CW output power
> 0.8 mW
LFO-18-ip
Description:
LFO-18-ip – is a series of optical modules based on Mitsubishi 1550nm MQW
InGaAsP/InP Fabry-Perot laser diode and coupled with singlemode optical
fiber. Hermetically sealed modules are performed in standard coaxial package with built-in InGaAs monitor photodiode and collimating ball lens.
The modules operate in wide temperature range, have stable output power
and more than 5*105 hours of lifetime.
LFO-18-ip – are the best light sources for digital (up to 622Mb/s) fiber-optic
communication lines, optical testers, systems of optical synchronization
and other applications.
Absolute maximum ratings:
Laser diode
Environment
Max. output power (mW)
Operating temperature range (оС)
1.2
Reverse voltage (V)
-40..+55
о
2.0
Storage temperature range ( С)
Monitor photodiode
-40..+70
Assembly
Reverse voltage (V)
10
Pin soldering temperature (оС)
200
Forward current (mA)
2.0
Pin soldering time (sec)
3.0
Optical and electrical characteristics (Т=25оС):
Characteristics
Symbol
Test condition
Output power from fiber end
POP
IOP
Wavelength
λOP
POP
Min
Typ.
Max
Units
Laser diode
0.8
1530
mW
1550
1570
nm
Spectral width (FWHM)
∆λ
POP
1.0
2.5
nm
Threshold current
ITH
CW
5.0
10
15
mA
Forward current
IF
POP
25
35
45
mA
Forward voltage
UOP
POP
1.1
1.5
V
Rise time/fall time
τR/τF
POP
0.3
0.7
ns
Monitor current
IPD
UREV=5.0 V, POP
Dark current
ID
UREV=5.0 V
0.01
0.1
µA
Capacitance
CPD
UREV=5.0 V, f=1 MHz
10
20
pF
Monitor photodiode
100
500
µA
Optical fiber
Fiber core/cladding diameter
Fiber length
Optical connector type
DC/DCL
9/125
µm
L
400..1500
mm
«FC»
ROITHNER LASERTECHNIK
A-1040 VIENNA, SCHOENBRUNNER STRASSE 7, AUSTRIA
TEL: +43 -1- 586 52 43-0 FAX: +43 -1- 586 52 43-44
e-mail: [email protected] http://www.roithner-laser.com
LFO-18-ip
Package specifications (type «A»):
Pin
Function
1
PD cathode (+)
2
PD anode (-)
3
LD anode (+), case
4
LD cathode (-)
Package specifications (type «B»):
Pin
Function
1
PD cathode (+)
2
PD anode (-)
3
LD anode (+), case
4
LD cathode (-)
Package specifications (type «C»):
Pin
Function
1
PD cathode (+)
2
PD anode (-)
3
LD anode (+), case
4
LD cathode (-)
Typical optical and electrical characteristics (Т=25оС):
5
1,0
o
Optical Power (mW)
0,8
0,6
0,4
0,2
LFO-18-ip
0,0
1,54
1,55
1,56
Wavelength (µm)
0
10
20
30
40
50
LFO-18-ip
4
o
o
25 C 40 C 60 C
Relative Optical Power (dBm)
LFO-18-ip
3
2
1
0
-1
-2
-3
Ipd = const
-4
-5
-40 -20
Current (mA)
0
20
40
60
Temperature (deg.)
ROITHNER LASERTECHNIK
A-1040 VIENNA, SCHOENBRUNNER STRASSE 7, AUSTRIA
TEL: +43 -1- 586 52 43-0 FAX: +43 -1- 586 52 43-44
e-mail: [email protected] http://www.roithner-laser.com
80
Similar pages