KOA MCL2BHTTER18 Multi layer ferrite inductor Datasheet

SS-223 R9
12/6/06
11:26 AM
Page 1
SS-223 R9
AHA 12/06/06
Multi Layer Ferrite Inductors
Type MCL
CERTIFIED
CERTIFIED
1. General
■ Nickel barrier with solder overcoat
for excellent solderability
■ Magnetically shielded
■ Monolithic structure for closed magnetic path eliminates
crosstalk and provides high reliability in a wide range
of temperature and humidity ranges
■ Standard EIA packages: 1J, 2A, 2B
2. 2.1 Dimensions
W
L
Solder
Plating
Ni
Plating
Silver
Metallization
t
d
Terminations
(Metallization
Bands)
d
Size
Code
L
W
t
d
1J
(0603)
.063±.006
(1.6±0.15)
.031±.006
(0.8±0.15)
.031±.006
(0.8±0.15)
.014±.006
(0.36±0.15)
2A
(0805)
.079±.008
(2.0±0.2)
.049±.008
(1.25±0.2)
.035±.008
(0.9±0.2)
.02±.01
(0.51±0.25)
2B
(1206)
.126±.008
(3.2±0.2)
.063±.008
(1.6±0.2)
.043±.008
(1.1±0.2)
.02±.01
(0.51±0.25)
Electrodes
3. Ordering and Specifying Information*
MCL
1J
H
T
TE
R10
J
Type
Size
Material
Termination
Material
Packaging
Nominal
Inductance
Tolerance
1J
2A
2B
Permeability
Code:
H
J
T: Sn
(Other termination
styles available,
contact factory
for options)
TD: 7" Paper Tape
(1J - 4,000 pcs/reel; 2A - 0.047µH
- 2.2µH = 4,000 pcs/reel)
TE: 7" Embossed Plastic
(2A - 2.7µH - 10µH = 3,000
pcs/reel; 2B - 3,000 pcs/reel)
047 = .047µH
R10 = .100µH
K: ±10%
M: ±20%
Allowable
DC Current
Maximum
(mA)
Operating
Temperature
Range
* Please note: KSE’s part numbers do not contain any spaces or hyphens.
4. Standard Applications
Part
Designation
Inductance
L (µH)
MCL1JHTTD047M
MCL1JHTTD068M
MCL1JHTTD082M
MCL1JHTTDR10*
MCL1JHTTDR12*
MCL1JHTTDR15*
MCL1JHTTDR18*
MCL1JHTTDR22*
MCL1JHTTDR27*
0.047
0.068
0.082
0.10
0.12
0.15
0.18
0.22
0.27
Minimum
Q
L.Q. Test
Frequency
(MHz)
10
50
15
Self Resonant
Frequency
Typical
(MHz)
260
250
245
240
205
180
165
150
136
25
DC
Resistance
Maximum
(Ω)
0.30
0.50
50
0.60
0.80
* Add tolerance character (K, M) - Other tolerances available upon request
Bolivar Drive
■
P.O. Box 547
■
Bradford, PA 16701
■
USA
■
-55°C
to
+125°C
PAGE 1 OF 6
814-362-5536
■
Fax 814-362-8883
■
www.koaspeer.com
Spec ific ation s g iven herein m ay be cha nged a t any tim e w itho ut pr ior not ice. Pleas e c onf ir m te chnic al s pec if ica tions before you order an d/or u se.
SS-223 R9
12/6/06
11:26 AM
Page 2
SS-223 R9
4. Standard Applications (continued)
Part
Designation
Inductance
L (µH)
MCL1JHTTDR33*
MCL1JHTTDR39*
MCL1JHTTDR47*
MCL1JHTTDR56*
MCL1JHTTDR68*
MCL1JHTTDR82*
MCL1JJTTD1R0*
MCL1JJTTD1R2*
MCL1JJTTD1R5*
MCL1JJTTD1R8*
MCL1JJTTD2R2*
MCL1JJTTD2R7*
MCL1JJTTD3R3*
MCL1JJTTD3R9*
MCL1JJTTD4R7*
MCL1JJTTD5R6*
MCL1JJTTD6R8*
MCL1JJTTD8R2*
MCL1JJTTD100*
MCL1JJTTD120*
MCL2AHTTD047M
MCL2AHTTD068M
MCL2AHTTD082M
MCL2AHTTDR10*
MCL2AHTTDR12*
MCL2AHTTDR15*
MCL2AHTTDR18*
MCL2AHTTDR22*
MCL2AHTTDR27*
MCL2AHTTDR33*
MCL2AHTTDR39*
MCL2AHTTDR47*
MCL2AHTTDR56*
MCL2AHTTDR68*
MCL2AHTTDR82*
MCL2AJTTD1R0*
MCL2AJTTD1R2*
MCL2AJTTD1R5*
MCL2AJTTD1R8*
MCL2AJTTD2R2*
MCL2AJTTE2R7*
MCL2AJTTE3R3*
MCL2AJTTE3R9*
MCL2AJTTE4R7*
0.33
0.39
0.47
0.56
0.68
0.82
1.0
1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8
8.2
10
12
0.047
0.068
0.082
0.10
0.12
0.15
0.18
0.22
0.27
0.33
0.39
0.47
0.56
0.68
0.82
1.0
1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
Minimum
Q
L.Q. Test
Frequency
(MHz)
15
25
Self Resonant
Frequency
Typical
(MHz)
125
110
105
95
90
85
75
65
60
55
50
45
40
35
33
22
20
18
17
15
320
280
255
235
220
200
185
170
150
145
135
125
115
105
100
75
65
60
55
50
45
41
38
35
10
35
4
30
2
15
50
20
25
25
45
10
DC
Resistance
Maximum
(Ω)
0.85
1.00
1.35
1.55
1.70
2.10
0.60
Allowable
DC Current
Maximum
(mA)
0.80
25
0.95
1.15
1.35
1.55
1.70
2.10
1.55
1.70
2.10
1.85
2.10
0.20
Operating
Temperature
Range
35
-55°C
to
+125°C
15
5
3
300
0.30
0.40
250
0.50
0.55
0.65
0.75
0.80
1.00
0.40
0.50
0.60
0.65
0.75
0.80
0.90
1.00
200
150
-55°C
to
+125°C
50
30
* Add tolerance character (K, M) - Other tolerances available upon request
PAGE 2 OF 6
Bolivar Drive
■
P.O. Box 547
■
Bradford, PA 16701
■
USA
■
814-362-5536
■
Fax 814-362-8883
■
www.koaspeer.com
Spec ific ation s g iven herein m ay be cha nged a t any tim e w itho ut pr ior not ice. Pleas e c onf ir m te chnic al s pec if ica tions before you order an d/or u se.
SS-223 R9
12/6/06
11:26 AM
Page 3
SS-223 R9
4. Standard Applications (continued)
Part
Designation
Inductance
L (µH)
MCL2AJTTE5R6*
MCL2AJTTE6R8*
MCL2AJTTE8R2*
MCL2AJTTE100*
MCL2BHTTE047M
MCL2BHTTE068M
MCL2BHTTER10*
MCL2BHTTER12*
MCL2BHTTER15*
MCL2BHTTER18*
MCL2BHTTER22*
MCL2BHTTER27*
MCL2BHTTER33*
MCL2BHTTER39*
MCL2BHTTER47*
MCL2BHTTER56*
MCL2BHTTER68*
MCL2BHTTER82*
MCL2BJTTE1R0*
MCL2BJTTE1R2*
MCL2BJTTE1R5*
MCL2BJTTE1R8*
MCL2BJTTE2R2*
MCL2BJTTE2R7*
MCL2BJTTE3R3*
MCL2BJTTE3R9*
MCL2BJTTE4R7*
MCL2BJTTE5R6*
MCL2BJTTE6R8*
MCL2BJTTE8R2*
MCL2BJTTE100*
MCL2BJTTE120*
MCL2BJTTE150*
MCL2BJTTE180*
5.6
6.8
8.2
10
0.047
0.068
0.10
0.12
0.15
0.18
0.22
0.27
0.33
0.39
0.47
0.56
0.68
0.82
1.0
1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8
8.2
10
12
15
18
MCL2BJTTE220*
MCL2BJTTE270*
MCL2BJTTE330*
Minimum
Q
Self Resonant
Frequency
Typical
(MHz)
32
29
26
24
320
280
235
220
200
185
170
150
145
135
125
115
105
100
75
65
60
55
50
45
41
38
35
32
29
26
24
22
19
18
L.Q. Test
Frequency
(MHz)
4
50
2
50
20
25
25
45
10
4
50
2
22
27
33
1
30
DC
Resistance
Maximum
(Ω)
0.90
1.00
1.10
1.15
0.15
15
Operating
Temperature
Range
-55°C
to
+125°C
300
0.25
0.30
0.40
0.50
0.60
0.50
0.60
0.70
0.80
0.90
0.40
250
200
150
100
0.50
-55°C
to
+125°C
0.60
50
0.70
0.80
0.85
0.90
1.00
1.05
25
15
0.70
16
14
13
0.4
Allowable
DC Current
Maximum
(mA)
0.90
5
1.05
* Add tolerance character (K, M) - Other tolerances available upon request
PAGE 3 OF 6
Bolivar Drive
■
P.O. Box 547
■
Bradford, PA 16701
■
USA
■
814-362-5536
■
Fax 814-362-8883
■
www.koaspeer.com
Spe cific at io ns g ive n herein m ay be ch anged a t any tim e w ith out p rior not ice. Pleas e c onf ir m t echn ic al s pec ifica tions before you order an d/or u se.
SS-223 R9
12/6/06
11:26 AM
Page 4
SS-223 R9
5. Characteristics
Item
Requirement
Conditions
Operating Temperature
-25°C ~ +85°C
Storage Temperature
40°C @ 70% Humidity
Sealed plastic bags with desiccant shall be
used to reduce the potential of oxidation on
the terminations during storage.
Resistance to Solder
Heat
Change in Inductance: Relative to value before
test ±20%.
Appearance: There shall be no cracking
Solder Coverage: More than 75% of the terminal
electrode shall be covered with solder.
Flux: 5-10 sec dip
After Flux: Air dry for 15 sec
Preheat: 150°C ±10°C
Preheat Time: 60 sec
Solder Temp: 260°C ±5°C
Dip Time: 10 ±1 sec
Solderability
Solder Coverage: More than 95% of the
termination shall be covered with solder.
Flux: 5-10 sec dip
After Flux: Air dry for 15 sec
Solder Temp: 245°C ±5°C
Dip Time: 5 ±0.5 sec
Leach Resistance
Appearance: There shall be no visible signs of
physical or mechanical damage (i.e. no cracks)
Terminations: Termination must not be leached
away for more than 5%.
The bead shall be subjected to the following
5 steps for the period of time shown below.
The 5 steps constitute one (1) rotation.
4 rotations shall be carried out.
1) Flux: 5-10 sec
2) After Flux: Air dry for 15 sec
3) Solder Temp: 230°C ±5°C
4) Dip Time: 5 ±0.5 sec
5) Cool: Air cool for 60 seconds
Insulation Resistance
Insulation Resistance: Min 1G ohms
Solvent Resistance
Change in Inductance: Relative to value before
test ±10%.
Terminal Strength
(hanging test)
Appearance: The terminal electrode shall not
break off, nor shall there be damage to the body.
Type
1J (0603)
2A (0805)
2B (1206)
W(kgf)
0.5
1.0
1.5
Time
30 sec ±2 sec
30 sec ±2 sec
30 sec ±2 sec
Terminal Strength
(push test)
Appearance: There shall be no evidence of
mechanical degradations to terminals or body.
Type
1J (0603)
2A (0805)
2B (1206)
W(kgf)
1.4
1.8
2.3
Time
60 sec
60 sec
60 sec
Bending Strength
Appearance: There shall be no physical or
mechanical damage
Inductance: Relative to initial value before
test ±10%
Cleaning by:
Washer: Ultrasonic washer (100W)
Solvent: Isopropyl alcohol
Time: 3 minutes
Board: 90x40x1.6mm
Bend: 1mm
Time: 5 sec
PAGE 4 OF 6
Bolivar Drive
■
P.O. Box 547
■
Bradford, PA 16701
■
USA
■
814-362-5536
■
Fax 814-362-8883
■
www.koaspeer.com
Spec ific ation s g iven herein m ay be cha nged a t any tim e w itho ut pr ior not ice. Pleas e c onf ir m te chnic al s pec if ica tions before you order an d/or u se.
SS-223 R9
12/6/06
11:26 AM
Page 5
SS-223 R9
5. Characteristics (continued)
Item
Requirement
Conditions
Mechanical Shock
Appearance: There shall be no physical or
mechanical damage
Inductance: Relative to initial value before test
±10%
Force: 50G
Time: 11 msec
There shall be 3 shocks in each of 6 directions
(18 shocks total).
Vibration
Inductance: Relative to initial value ±10%
Only endurance conditioning by sweeping shall
be made. The entire frequency range from
10-2,000 Hz and return to 10 Hz in 20 minutes
(this shall constitute one cycle).
Amplitude: 1.5mm
The test shall have a 15G peak and shall be
applied for a period of 4 hours (12 cycles)
in each of 3 mutually perpendicular directions
(a total of 36 cycles within a total of 12 hours).
Thermal Shock
Appearance: There shall be no physical or
mechanical damage.
Inductance: Relative to initial value ±20%.
DCR: The DCR shall not exceed initial specified
value.
Testing of the parts will be made at 0 hours, 250
hours and 500 hours. Before testing the parts
shall be allowed to cool to room temperature for
24 hours.
Load Humidity
Appearance: There shall be no physical or
mechanical damage
Inductance: Relative to initial value ±15%
Step
1-start
2-hold
3-transfer
4-hold
5-transfer
Temperature
-40°C ±2°C
-40°C ±2°C
—
+105°C ±2°C
—
Time
—
30 min ±5 min
0.5 min max.
30 min ±5 min
0.5 min max.
Steps 1 thru 5 constitute one complete
cycle and the test shall consist of a total
of 500 cycles.
Temperature: 85°C ±2°C
Relative Humidity: 85%
Time: 1,000 hours total
Apply: 100% rated current
Measurements shall be taken at 0 hours, 250
hours, 500 hours and 1,000 hours and shall meet
the conditions stated above.
Life Test
Appearance: There shall be no physical or
mechanical damage
Inductance: Relative to initial value ±15%
Temperature: 85°C ±2°C
Time: 1,000 hours total
Apply: 100% rated current
Measurements shall be taken at 0 hours, 250
hours, 500 hours and 1,000 hours and shall meet
the conditions stated above.
6. Packaging Specifications
KOA’s multi layer components are provided on tape-and-reel
for use in pick-and-place machines. The reel size is 7 inch.
PAGE 5 OF 6
Bolivar Drive
■
P.O. Box 547
■
Bradford, PA 16701
■
USA
■
814-362-5536
■
Fax 814-362-8883
■
www.koaspeer.com
Spec ific ation s g iven herein m ay be cha nged a t any tim e w itho ut pr ior not ice. Pleas e c onf ir m te chnic al s pec if ica tions before you order an d/or u se.
SS-223 R9
12/6/06
11:26 AM
Page 6
SS-223 R9
7. Dimensions - inches (mm)
Tape
Ao
Bo
Do
Ko
2A
0.063±0.002 0.093±0.002 0.046±0.002
(1.6±0.1)
(2.4±0.1)
(1.2±0.1)
2B
0.071±0.002 0.138±0.002 0.048±0.002
(1.8±0.1)
(3.5±0.1)
(1.2±0.1)
F
W
Bo
D1
Tape
1J
2A
2B
E
F
t
E
0.043±0.002 0.075±0.002 0.043±0.002
(1.1±0.1)
(1.9±0.1)
(1.1±0.1)
1J
P2
Po
W
P1
Ao
P1
Po
P2
Do
Ko
D1
0.069±0.004 0.138±0.002 0.318±0.002 0.157±0.004 0.157±0.004 0.079±0.002 0.059±0.004 0.039 min.
(1.75±0.10) (3.50±.005)
(8.1±0.1)
(4.0±0.1)
(4.0±0.1)
(2.00±0.05) (1.5+0.1/-0.0) (1.0 min.)
Parts on
7 inch (178mm) Reel
1J
4,000
2A
* 2,000/4,000
2B
3,000
0.009±0.001
(0.23±0.02)
9. Recommended PC Board Land Patterns - inches (mm)
8. Chip Quantities Per Reel
Chip Size
t
Chip Size
L
G
H
1J
0.102 (2.6)
0.022 (0.55)
0.037 (0.94)
2A
0.118 (3.0)
0.026 (0.66)
0.057 (1.45)
2B
0.173 (4.4)
0.059 (1.5)
0.071 (1.8)
* MCL0805: 2.7µH ~ 12µH = 2K
0.047µH ~ 2.2µH = 4K
H
G
L
10. Recommended Temperature Profiles for Soldering
Recommended
Temperature
Profile
Recommended
Temperature
Profile
forfor
Wave
Soldering
Wave
Soldering
Preheat
100100
Preheat
Seconds
Max.
Seconds
Max.
Soldering
Soldering
10 Seconds
Max.
10 Seconds
Max.
Recommended
Temperature
Profile
Recommended
Temperature
Profile
forfor
Reflow
Soldering
Reflow
Soldering
Natural
Natural
Cooling
Cooling
Preheat
100100
Preheat
Seconds
Max.
Seconds
Max.
250°C
250°C
Soldering
Soldering
10 Seconds
Max.
10 Seconds
Max.
Natural
Natural
Cooling
Cooling
230°C
230°C
200°C
200°C
150°C
150°C
150°C
150°C
60 Seconds
Max.
60 Seconds
Max.
20 Seconds
Max.
20 Seconds
Max.
60 Seconds
Max.
60 Seconds
Max.
PAGE 6 OF 6
Bolivar Drive
■
P.O. Box 547
■
Bradford, PA 16701
■
USA
■
814-362-5536
■
Fax 814-362-8883
■
www.koaspeer.com
Spec ific ation s g iven herein m ay be cha nged a t any tim e w itho ut pr ior not ice. Pleas e c onf ir m te chnic al s pec if ica tions before you order an d/or u se.
Similar pages