OPA741 Series 12 Watt Light Ring on Anotherm Linear Heat Spreader with Lens OPA741 Series • • • • • 12, 1 watt LEDs per cylindrical substrate Mono-color per strip (Blue, Green, Red, Yellow, White) Component beam angle 23° Universal connector (Tyco 2-292173-2 mates with 173977-2) RoHS Compliant Product Photo Here OPA741_ (23° Beam Angle) The OPA741 Series are designed for areas where lighting intensity and reliability are essential. The light beam angle of 23° is ideal for illuminating areas close or a long distances from the device while requiring minimal space. A patented substrate is used to ensure the best heat dissipation of any light assembly in the industry. For custom colors and design contact your OPTEK representative. Electrical / Optical Characteristics: TA=25°C, IF=700mA Part Number Typical Forward Voltage (V) Luminous Flux (lm) OPA741Y23 15.0 OPA741B23 Color Dominant Wavelength 357 Yellow 587 nm 21.6 92 Blue 470 nm OPA741G23 21.6 490 Green 530 nm OPA741R23 15.0 265 Red 625 nm OPA741W23 21.6 490 White 6,500°K + Voltage Beam Angle 23° Ground OPA741_ See OVSP_BCR4 for component specifications DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY OCCUR. RoHS OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A 04/06 Page 1 of 1