Illumination LUXEON CoB Core Range – High Density Double the flux in the same form factor LUXEON CoB Core Range – High Density focuses on achieving the highest Center Beam Candle Power (CBCP). With a focus on 6, 9 and 11mm Light Emitting Surfaces, we can cover a flux range as high as 8,000 lumens. Using the mechanical dimensions of our LUXEON CoB Core Range, the High Density range will also benefit from the ability to utilize existing an ecosystem of holders, optics and drivers. Features and Benefits Primary Applications Highest flux densities with industry’s smallest LES Downlights 3-step MacAdam ellipse color definition: Freedom from Binning for color consistency from luminaire to luminaire Up to 4x lower thermal resistance than competition, enabling smaller heatsinks and higher lumens Outdoor Spotlights Supported by a comprehensive optical, mechanical and electrical ecosystem DS189 LUXEON CoB Core Range – High Density Product Datasheet ©2018 Lumileds Holding B.V. All rights reserved. No. E352519 Table of Contents General Product Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Product Test Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Part Number Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Lumen Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Environmental Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Performance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Product Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Optical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Electrical and Thermal Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Characteristic Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Spectral Power Distribution Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Light Output Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Forward Current Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Radiation Pattern Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Color Bin Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Mechanical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Packaging Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Tube Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 DS189 LUXEON CoB Core Range – High Density Product Datasheet 20180322 ©2018 Lumileds Holding B.V. All rights reserved. i General Product Information Product Test Conditions LUXEON CoB Core Range – High Density LEDs are tested and binned with a DC drive current specified below at a junction temperature, Tj, of 85°C: 350mA – LUXEON CoB 1202HD 700mA – LUXEON CoB 1204HD 900mA – LUXEON CoB 1205HD Part Number Nomenclature Part numbers for LUXEON CoB Core Range – High Density follow the convention below: L 2 C 5 – A A B B C C C C E D D F F Where: A A – designates nominal CCT (22=2200K, 27=2700K, 30=3000K, 35=3500K, 40=4000K, 50=5000K, 57=5700K, 65=6500K) B B – designates minimum CRI (70=70CRI, 80=80CRI, 90=90CRI) C C C C – designates product configuration (1202, 1204, 1205) D D – designates light emitting surface (LES) size (06=6mm, 09=9mm, 11=11mm) F F – designates options for product specification Therefore, the following part number is used for a LUXEON CoB 1204, 3000K 80CRI, with a 9mm LES: L 2 C 5 – 3 0 8 0 1 2 0 4 E 0 9 0 0 Lumen Maintenance Please contact your local Sales Representative or Lumileds Technical Solutions Manager for more information about the longterm performance of this product. Environmental Compliance Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON CoB Core Range – High Density is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add the following restricted materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE). DS189 LUXEON CoB Core Range – High Density Product Datasheet 20180322 ©2018 Lumileds Holding B.V. All rights reserved. 2 Performance Characteristics Product Selection Guide Table 1. Product performance of LUXEON CoB Core Range – High Density at specified test current, Tj=85°C. Product LUXEON CoB 1202HD LUXEON CoB 1204HD Nominal CCT Minimum CRI [1, 2, 3] 3000K 70 Minimum Typical Typical Luminous Efficacy (lm/W) 1388 1542 119 Luminous Flux [1] (lm) TEST CURRENT (mA) LES [4] (mm) Part Number 350 6 L2C5-30701202EH600 4000K 70 1505 1673 129 350 6 L2C5-40701202EH600 5000K 70 1505 1673 129 350 6 L2C5-50701202EH600 2700K 80 1240 1378 106 350 6 L2C5-27801202EH600 3000K 80 1368 1520 117 350 6 L2C5-30801202EH600 3500K 80 1406 1562 121 350 6 L2C5-35801202EH600 4000K 80 1438 1598 123 350 6 L2C5-40801202EH600 5000K 80 1425 1583 122 350 6 L2C5-50801202EH600 5700K 80 1432 1591 123 350 6 L2C5-57801202EH600 2700K 90 1059 1177 91 350 6 L2C5-27901202EH600 3000K 90 1124 1248 96 350 6 L2C5-30901202EH600 3500K 90 1223 1359 105 350 6 L2C5-35901202EH600 4000K 90 1217 1353 104 350 6 L2C5-40901202EH600 3000K 70 2887 3207 124 700 9 L2C5-30701204E0900 3500K 70 2800 3111 120 700 9 L2C5-35701204E0900 4000K 70 3011 3345 129 700 9 L2C5-40701204E0900 5000K 70 3011 3345 129 700 9 L2C5-50701204E0900 5700K 70 2866 3185 123 700 9 L2C5-57701204E0900 6500K 70 2824 3137 121 700 9 L2C5-65701204E0900 2200K 80 2140 2378 92 700 9 L2C5-22801204E0900 2700K 80 2554 2838 110 700 9 L2C5-27801204E0900 3000K 80 2688 2987 115 700 9 L2C5-30801204E0900 3500K 80 2742 3047 118 700 9 L2C5-35801204E0900 4000K 80 2850 3167 122 700 9 L2C5-40801204E0900 5000K 80 2850 3167 122 700 9 L2C5-50801204E0900 5700K 80 2891 3212 124 700 9 L2C5-57801204E0900 2200K 90 1864 2071 80 700 9 L2C5-22901204E0900 2700K 90 2130 2366 91 700 9 L2C5-27901204E0900 3000K 90 2269 2521 97 700 9 L2C5-30901204E0900 3200K 90 2271 2523 97 700 9 L2C5-32901204E0900 3500K 90 2365 2628 101 700 9 L2C5-35901204E0900 4000K 90 2458 2731 105 700 9 L2C5-40901204E0900 Notes for Table 1: 1. Lumileds maintains a tolerance of ±2 on CRI and ±6.5% on luminous flux measurements. 2. Typical CRI is approximately 2 points higher than the minimum CRI specified, but this is not guaranteed. 3. R9 value of 90CRI products are >50. 4. Light Emitting Surface (LES) is the inner diameter (phosphor area) inside the dam. DS189 LUXEON CoB Core Range – High Density Product Datasheet 20180322 ©2018 Lumileds Holding B.V. All rights reserved. 3 Table 1. Product performance of LUXEON CoB Core Range – High Density at specified test current, Tj=85°C, Continued. Product LUXEON CoB 1205HD Nominal CCT Minimum CRI [1, 2, 3] 3000K 70 Minimum Typical Typical Luminous Efficacy (lm/W) 3360 3950 119 Luminous Flux [1] (lm) TEST CURRENT (mA) LES [4] (mm) Part Number 900 11 L2C5-30701205E1100 4000K 70 3780 4200 126 900 11 L2C5-40701205E1100 5000K 70 3780 4200 126 900 11 L2C5-50701205E1100 2700K 80 3207 3563 107 900 11 L2C5-27801205E1100 3000K 80 3375 3750 113 900 11 L2C5-30801205E1100 3500K 80 3546 3940 118 900 11 L2C5-35801205E1100 4000K 80 3650 4056 122 900 11 L2C5-40801205E1100 5000K 80 3545 3939 118 900 11 L2C5-50801205E1100 5700K 80 3702 4114 124 900 11 L2C5-57801205E1100 2700K 90 2727 3030 91 900 11 L2C5-27901205E1100 3000K 90 2934 3260 98 900 11 L2C5-30901205E1100 4000K 90 3119 3465 104 900 11 L2C5-40901205E1100 Notes for Table 1: 1. Lumileds maintains a tolerance of ±2 on CRI and ±6.5% on luminous flux measurements. 2. Typical CRI is approximately 2 points higher than the minimum CRI specified, but this is not guaranteed. 3. R9 value of 90CRI products are >50. 4. Light Emitting Surface (LES) is the inner diameter (phosphor area) inside the dam. Optical Characteristics Table 2. Optical characteristics for LUXEON CoB Core Range – High Density at specified test current, Tj=85°C. Part Number Typical Total Included Angle [1] Typical Viewing Angle [2] L2C5-xxxx12xxExx00 135° 115° Notes for Table 2: 1. Total angle at which 90% of total luminous flux is captured. 2. Viewing angle is the off axis angle from the LED centerline where the luminous intensity is ½ of the peak value. Electrical and Thermal Characteristics Table 3. Electrical and thermal characteristics for LUXEON CoB Core Range – High Density at specified test current, Tj=85°C. Forward Voltage [1] (Vf) Typical Thermal Resistance—Junction to case [3] (°C/W) Minimum Typical MAXIMUM Typical Temperature Coefficient of Forward Voltage [2] (mV/°C) L2C5-xxxx1202EH600 34.5 37.0 39.5 -16 0.98 L2C5-xxxx1204E0900 34.5 37.0 39.5 -16 0.55 L2C5-xxxx1205E1100 34.5 37.0 39.5 -16 0.51 Part Number Notes for Table 3: 1. Lumileds maintains a tolerance of ±2% on forward voltage measurements. 2. Measured between 25°C and 85°C. 3. Thermal resistance is measured between junction and the bottom of the LUXEON CoB substrate. DS189 LUXEON CoB Core Range – High Density Product Datasheet 20180322 ©2018 Lumileds Holding B.V. All rights reserved. 4 Absolute Maximum Ratings Table 4. Absolute maximum ratings for LUXEON CoB Core Range – High Density. Parameter DC Forward Current Maximum Performance 700mA (1202HD), 1350mA (1204HD), 1650mA (1205HD) [1, 2] LED Junction Temperature [1] (DC & Pulse) 150°C ESD Sensitivity (ANSI/ESDA/JEDEC JS-001-2012) Class 3B Operating Case Temperature LED Storage Temperature [1] -40°C to 105°C -40°C to 120°C Allowable Reflow Cycles 3 Reverse Voltage (Vreverse) LUXEON LEDs are not designed to be driven in reverse bias Notes for Table 4: 1. Proper current derating must be observed to maintain the junction temperature below the maximum allowable junction temperature. 2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple,” are acceptable if the following conditions are met: – The frequency of the ripple current is 100Hz or higher – The average current for each cycle does not exceed the maximum allowable DC forward current – The maximum amplitude of the ripple does not exceed the maximum peak pulsed forward current DS189 LUXEON CoB Core Range – High Density Product Datasheet 20180322 ©2018 Lumileds Holding B.V. All rights reserved. 5 Characteristic Curves Spectral Power Distribution Characteristics Figure 1. Typical normalized power vs. wavelength for L2C5-xxxx12xxExx00 at specified test current, Tj=85°C. Light Output Characteristics Figure 2. Typical normalized light output vs. junction temperature for L2C5-xxxx12xxExx00 at specified test current. DS189 LUXEON CoB Core Range – High Density Product Datasheet 20180322 ©2018 Lumileds Holding B.V. All rights reserved. 6 L2C5-xxxx1202EH600 L2C5-xxxx1204E0900 L2C5-xxxx1205E1100 Figure 3. Typical normalized light output vs. forward current for LUXEON CoB Core Range – High Density at Tj=85°C. DS189 LUXEON CoB Core Range – High Density Product Datasheet 20180322 ©2018 Lumileds Holding B.V. All rights reserved. 7 Forward Current Characteristics L2C5-xxxx1202EH600 L2C5-xxxx1204E0900 L2C5-xxxx1205E1100 Figure 4. Typical forward current vs. forward voltage for LUXEON CoB Core Range – High Density at Tj=85°C. DS189 LUXEON CoB Core Range – High Density Product Datasheet 20180322 ©2018 Lumileds Holding B.V. All rights reserved. 8 Radiation Pattern Characteristics Figure 5. Typical radiation pattern for LUXEON CoB Core Range – High Density at specified test current, Tj=85ºC. Figure 6. Typical polar radiation pattern for LUXEON CoB Core Range – High Density at specified test current, Tj=85ºC. DS189 LUXEON CoB Core Range – High Density Product Datasheet 20180322 ©2018 Lumileds Holding B.V. All rights reserved. 9 Color Bin Definitions Figure 7. 3-step MacAdam ellipse illustration for Table 5. Table 5. 3-step MacAdam ellipse color bin definitions for LUXEON CoB Core Range – High Density. Nominal CCT Color Space Center Point [1] (cx, cy) Major Axis, a Minor Axis, b Ellipse Rotation Angle, θ 2200K Single 3-step MacAdam ellipse (0.5020, 0.4155) 0.00862 0.00397 49.30° 2700K Single 3-step MacAdam ellipse (0.4578, 0.4101) 0.00810 0.00420 53.70° 3000K Single 3-step MacAdam ellipse (0.4338, 0.4030) 0.00834 0.00408 53.20° 3200K Single 3-step MacAdam ellipse (0.4232, 0.3991) 0.00834 0.00408 53.20° 3500K Single 3-step MacAdam ellipse (0.4073, 0.3917) 0.00927 0.00414 54.00° 4000K Single 3-step MacAdam ellipse (0.3818, 0.3797) 0.00939 0.00402 53.70° 5000K Single 3-step MacAdam ellipse (0.3447, 0.3553) 0.00822 0.00354 59.60° 5700K Single 3-step MacAdam ellipse (0.3287, 0.3417) 0.00745 0.00320 59.09° 6500K Single 3-step MacAdam ellipse (0.3123, 0.3282) 0.00669 0.00285 58.57° Notes for Table 5: 1. Lumileds maintains a tolerance of ±0.005 on x and y coordinates in the CIE 1931 color space. DS189 LUXEON CoB Core Range – High Density Product Datasheet 20180322 ©2018 Lumileds Holding B.V. All rights reserved. 10 Mechanical Dimensions L2C5-xxxx1204E0900 L2C5-xxxx1202EH600 L2C5-xxxx1205E1100 Figure 8. Mechanical dimensions for LUXEON CoB Core Range – High Density. Notes for Figure 8: 1. Drawings are not to scale. 2. All dimensions are in millimeters. DS189 LUXEON CoB Core Range – High Density Product Datasheet 20180322 ©2018 Lumileds Holding B.V. All rights reserved. 11 Packaging Information LUXEON CoB Core Range – High Density LEDs are packaged in tubes then in a carton box. Each tube contains a specified number of LEDs. The LEDs in each tube come from a single category code, ensuring they are all well-matched for light output, color, and forward voltage. Each tube contains a rubber stopper at one end. The tube label has both alphanumeric and bar code information. The carton boxes have printed information providing part numbers with CAT codes that indicate luminous flux, color and forward voltage bins. Table 6. Number of LEDs per tube for LUXEON CoB Core Range – High Density. Part Number TOTAL UNITS PER TUBE TOTAL TUBES PER Inner box TOTAL UNITS PER Inner box L2C5-xxxx1202EH600 20 5 100 L2C5-xxxx1204E0900 20 5 100 L2C5-xxxx1205E1100 20 5 100 Tube Dimensions Figure 9a. Tube dimensions for L2C5-xxxx1202EH600. Figure 9b. Tube dimensions for L2C5-xxxx1204E0900. Figure 9c. Tube dimensions for L2C5-xxxx1205E1100. Notes for Figures 9a, 9b and 9c: 1. Drawings not to scale. 2. All dimensions are in millimeters. DS189 LUXEON CoB Core Range – High Density Product Datasheet 20180322 ©2018 Lumileds Holding B.V. All rights reserved. 12 About Lumileds Companies developing automotive, mobile, IoT and illumination lighting applications need a partner who can collaborate with them to push the boundaries of light. With over 100 years of inventions and industry firsts, Lumileds is a global lighting solutions company that helps customers around the world deliver differentiated solutions to gain and maintain a competitive edge. As the inventor of Xenon technology, a pioneer in halogen lighting and the leader in high performance LEDs, Lumileds builds innovation, quality and reliability into its technology, products and every customer engagement. Together with its customers, Lumileds is making the world safer, better and more beautiful—with light. To learn more about our lighting solutions, visit lumileds.com. ©2018 Lumileds Holding B.V. All rights reserved. LUXEON is a registered trademark of the Lumileds Holding B.V. in the United States and other countries. lumileds.com DS189 LUXEON CoB Core Range – High Density Product Datasheet 20180322 Neither Lumileds Holding B.V. nor its affiliates shall be liable for any kind of loss of data or any other damages, direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds Holding B.V. and/or its affiliates have attempted to provide the most accurate information and data, the materials and services information and data are provided “as is,” and neither Lumileds Holding B.V. nor its affiliates warrants or guarantees the contents and correctness of the provided information and data. Lumileds Holding B.V. and its affiliates reserve the right to make changes without notice. You as user agree to this disclaimer and user agreement with the download or use of the provided materials, information and data. A listing of Lumileds product/patent coverage may be accessed at lumileds.com/patents.