CR3PM-12 Thyristor Low Power Use REJ03G0357-0200 Rev.2.00 Mar.01.2005 Features • • • • • Insulated Type • Glass Passivation Type • UL Recognized : Yellow Card No. E223904 File No. E80271 IT (AV) : 3 A VDRM : 600 V IGT : 100 µA Viso : 1500 V Outline PRSS0003AA-A (Package name: TO-220F) 2 3 1 1. Cathode 2. Anode 3. Gate 12 3 Applications TV sets, control of household equipment such as electric blanket, and other general purpose control applications Maximum Ratings Parameter Repetitive peak reverse voltage Non-repetitive peak reverse voltage DC reverse voltage Repetitive peak off-state voltageNote1 DC off-state voltageNote1 Rev.2.00, Mar.01.2005, page 1 of 7 Symbol VRRM VRSM VR (DC) VDRM VD (DC) Voltage class 12 600 720 480 600 480 Unit V V V V V CR3PM-12 Parameter RMS on-state current Average on-state current Symbol IT (RMS) IT (AV) Ratings 4.7 3.0 Unit A A ITSM 70 A I2 t 24.5 A2s PGM PG (AV) VFGM VRGM IFGM Tj Tstg — Viso 0.5 0.1 6 6 0.3 – 40 to +125 – 40 to +125 2.0 1500 W W V V A °C °C g V Surge on-state current I2t for fusing Peak gate power dissipation Average gate power dissipation Peak gate forward voltage Peak gate reverse voltage Peak gate forward current Junction temperature Storage temperature Mass Isolation voltage Conditions Commercial frequency, sine half wave 180° conduction, Tc = 103°C 60Hz sine half wave 1 full cycle, peak value, non-repetitive Value corresponding to 1 cycle of half wave 60Hz, surge on-state current Typical value Ta = 25°C, AC 1 minute, each terminal to case Notes: 1. With gate to cathode resistance RGK = 220 Ω. Electrical Characteristics Parameter Repetitive peak reverse current Symbol IRRM Min. — Typ. — Max. 2.0 Unit mA Repetitive peak off-state current IDRM — — 2.0 mA On-state voltage VTM — — 1.6 V Gate trigger voltage VGT — — 0.8 V Gate non-trigger voltage VGD 0.1 — — V Test conditions Tj = 125°C, VRRM applied, RGK = 220 Ω Tj = 125°C, VDRM applied, RGK = 220 Ω Tc = 25°C, ITM = 10 A, instantaneous value Tj = 25°C, VD = 6 V, IT = 0.1 A Tj = 125°C, VD = 1/2 VDRM RGK = 220 Ω Tj = 25°C, VD = 6 V, IT = 0.1 A Junction to caseNote2 Gate trigger current IGT 1 — 100Note3 µA Thermal resistance Rth (j-c) — — 4.1 °C/W Notes: 2. The contact thermal resistance Rth (c-f) in case of greasing is 0.5°C/W. 3. If special values of IGT are required, choose item D or E from those listed in the table below if possible. Item A B C D E IGT (µA) 1 to 30 20 to 50 40 to 100 1 to 50 20 to 100 The above values do not include the current flowing through the 220 Ω resistance between the gate and cathode. Rev.2.00, Mar.01.2005, page 2 of 7 CR3PM-12 Performance Curves 102 7 Tc = 25°C 5 3 2 Rated Surge On-State Current 100 Surge On-State Current (A) On-State Current (A) Maximum On-State Characteristics 101 7 5 3 2 100 7 5 3 2 40 30 20 10 2 3 4 5 7 101 2 3 4 5 7 102 VFGM = 6V PGM = 0.5W PG(AV) = 0.1W VGT = 0.8V IGT = 100µA (Tj = 25°C) IFGM = 0.3A × 100 (%) Gate Trigger Current vs. Junction Temperature 103 7 5 3 2 102 7 5 3 2 Typical Example IGT (25°C) # 1 45µA # 2 18µA #2 #1 101 7 5 3 2 100 –40 –20 0 20 40 60 80 100 120 Gate Current (mA) Junction Temperature (°C) Gate Trigger Voltage vs. Junction Temperature Maximum Transient Thermal Impedance Characteristics (Junction to case) 1.0 0.9 Gate Trigger Voltage (V) 50 Gate Characteristics 10–1 7 VGD = 0.1V 5 5 710–1 2 3 5 710 0 2 3 5 710 1 2 3 5 710 2 2 3 Distribution 0.8 Typical Example 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 –40 –20 0 20 40 60 80 100 120 Junction Temperature (°C) Rev.2.00, 60 Conduction Time (Cycles at 60Hz) Gate Trigger Current (Tj = t°C) Gate Trigger Current (Tj = 25°C) 100 7 5 3 2 70 On-State Voltage (V) Mar.01.2005, page 3 of 7 Transient Thermal Impedance (°C/W) Gate Voltage (V) 101 7 5 3 2 80 0 100 10–1 0.6 1.0 1.4 1.8 2.2 2.6 3.0 3.4 3.8 102 7 5 3 2 90 100 2 3 5 7 101 2 3 5 7 102 2 3 5 7 103 102 7 5 3 2 101 7 5 3 2 100 7 5 3 2 10–1 10–3 2 3 5 710–2 2 3 5 710–1 2 3 5 7 100 Time (s) CR3PM-12 Allowable Case Temperature vs. Average On-State Current (Single-Phase Half Wave) Maximum Average Power Dissipation (Single-Phase Half Wave) 160 7 Case Temperature (°C) Average Power Dissipation (W) 8 180° 6 120° 90° 5 θ = 30° 60° 4 3 θ 2 360° 1 0 1.0 2.0 3.0 4.0 θ = 30° 60 90° 60° 180° 120° 40 1.0 0 2.0 3.0 4.0 5.0 Allowable Ambient Temperature vs. Average On-State Current (Single-Phase Half Wave) Maximum Average Power Dissipation (Single-Phase Full Wave) 120 Average Power Dissipation (W) 8 Resistive, inductive loads Natural convection θ 360° θ = 180° 120° 90° 60° 30° 100 80 60 40 20 0 7 180° 6 120° 90° 5 θ = 30° 4 60° 3 2 θ 1 360° θ Resistive loads 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0 1.0 2.0 3.0 4.0 5.0 Average On-State Current (A) Average On-State Current (A) Allowable Case Temperature vs. Average On-State Current (Single-Phase Full Wave) Allowable Ambient Temperature vs. Average On-State Current (Single-Phase Full Wave) 160 160 140 140 Ambient Temperature (°C) Ambient Temperature (°C) Case Temperature (°C) 80 Average On-State Current (A) 140 120 100 80 θ = 30° 60° 90° 120° 180° 60 40 Resistive, inductive loads 100 Average On-State Current (A) θ θ 360° 20 Resistive loads 0 0 1.0 2.0 3.0 4.0 Average On-State Current (A) Rev.2.00, 120 0 5.0 160 0 θ 360° 20 Resistive, inductive loads 0 140 Mar.01.2005, page 4 of 7 5.0 120 θ = 180° 120° 90° 60° 30° 100 80 60 40 θ θ 360° 20 Resistive loads Natural convection 0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 Average On-State Current (A) CR3PM-12 160 RGK = 220Ω Typical Example Holding Current (mA) 140 120 100 80 60 40 20 Turn-Off Time (µs) Distribution 101 7 5 3 2 Typical Example 100 7 5 3 2 Holding Current vs. Gate to Cathode Resistance Turn-On Time vs. Gate Current Typical Example IGT(25°C) #1 25µA #2 50µA #1 300 250 #2 200 150 100 Turn-On Time (µs) Junction Temperature (°C) 350 50 101 7 5 4 3 2 VD = 100V Ta = 25°C Typical Example IGT (25°C) # 33µA # 100 7 5 4 3 2 10–1 0 10 0 10–1 2 3 5 7 100 2 3 5 7 101 2 3 5 7 102 2 3 4 5 7 101 2 3 4 5 7 102 Gate Current (mA) Turn-Off Time vs. Junction Temperature Repetitive Peak Reverse Voltage vs. Junction Temperature 50 40 30 Typical Example 20 Distribution 10 20 40 60 80 100 120 140 160 Junction Temperature (°C) Mar.01.2005, page 5 of 7 × 100 (%) Gate to Cathode Resistance (kΩ) IT = 2A 70 VD = 50V VR = 50V 60 dv/dt = 5V/µs 0 VD = 12V RGK = 1kΩ Junction Temperature (°C) 400 0 102 7 5 3 2 10–1 –40 –20 0 20 40 60 80 100 120 140 160 0 –40 –20 0 20 40 60 80 100 120 140 160 80 Rev.2.00, Holding Current vs. Junction Temperature Repetitive Peak Reverse Voltage (Tj = t°C) Repetitive Peak Reverse Voltage (Tj = 25°C) Holding Current (RGK = rkΩ) Holding Current (RGK = 1kΩ) × 100 (%) Breakover Voltage (Tj = t°C) Breakover Voltage (Tj = 25°C) × 100 (%) Breakover Voltage vs. Junction Temperature 160 Typical Example 140 120 100 80 60 40 20 0 –40 –20 0 20 40 60 80 100 120 140 160 Junction Temperature (°C) CR3PM-12 × 100 (%) 104 7 5 3 2 Gate Trigger Current (tw) Gate Trigger Current (DC) Gate Trigger Current vs. Gate Current Pulse Width 103 Typical Example tw 0.1s 7 5 3 2 102 7 5 3 2 101 100 2 3 5 7 101 2 3 5 7 102 2 3 5 7 103 Gate Current Pulse Width (µs) Rev.2.00, Mar.01.2005, page 6 of 7 CR3PM-12 Package Dimensions JEITA Package Code SC-67 RENESAS Code Package Name MASS[Typ.] PRSS0003AA-A TO-220F 2.0g Unit: mm 10.5Max 10.5Max 2.8 1.2 8.5 5.0 17 17 8.5 5.0 2.8 5.2 1.2 5.2 φ3.2 ± 0.2 φ3.2 ± 0.2 3.6 0.8 0.5 2.6 0.8 2.54 2.54 0.5 2.6 4.5 2.54 4.5 2.54 1.3Max 13.5Min 13.5Min 3.6 1.3Max Note: It applies to BCR2PM-12 Order Code Lead form Standard packing Quantity Standard order code Straight type Vinyl sack 100 Type name Lead form Tube 50 Type name – Lead forming code Note : Please confirm the specification about the shipping in detail. Rev.2.00, Mar.01.2005, page 7 of 7 Standard order code example CR3PM-12 CR3PM-12-A8 Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Keep safety first in your circuit designs! 1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. Notes regarding these materials 1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party. 2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor home page (http://www.renesas.com). 4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. 6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials. 7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. 8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein. http://www.renesas.com RENESAS SALES OFFICES Refer to "http://www.renesas.com/en/network" for the latest and detailed information. Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501 Renesas Technology Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K. Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900 Renesas Technology Hong Kong Ltd. 7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2730-6071 Renesas Technology Taiwan Co., Ltd. 10th Floor, No.99, Fushing North Road, Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999 Renesas Technology (Shanghai) Co., Ltd. Unit2607 Ruijing Building, No.205 Maoming Road (S), Shanghai 200020, China Tel: <86> (21) 6472-1001, Fax: <86> (21) 6415-2952 Renesas Technology Singapore Pte. Ltd. 1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 © 2005. Renesas Technology Corp., All rights reserved. Printed in Japan. Colophon .2.0