Lineage Power CAR2548FPAZ0-1A 2500 watt 48v front end power supply Datasheet

CAR2548FP Series
2500 Watt 48V Front End Power Supply
Features:
∎ Leading Edge Power Density, 27W/in3 in 1U Form Factor
∎ I2C Serial Bus and PMBus Interface
∎ Full Features Status & Control (Current, Voltage, AC OK,
DC OK & Temperature OK),
∎ Active Current Sharing (Single Wire)
∎ Remote On/Off, Remote Sense, Voltage Program Circuits
∎ Microprocessor Based Design Allows for Automatic Fan Speed Control
∎ Optional Universal / 4-Bay 19” Rack Delivers 10kW of Power
FEATURES
High Power Density 27W/in3
Load Sharing & Fault Tolerant
Automatic Fan Speed Control
System Scalability up to 10,000
Watts
Universal Input & International
Certifications
BENEFITS
More system space for application circuits and hardware
Excellent reliability in N+1 operation
Reduces audible noise and increases reliability
Allows flexibility with minimum investment
SPECIFICATIONS
Input Voltage Range
Input Current Maximum
Inrush Current
Input Protection
Power Factor
Efficiency
Output Power
Output Voltage Range
Output Current
Standby Bias Voltage
Voltage Regulation
Ouput Ripple & Noise
2500 Watt +48V Front End Power Supply
90-264 VAC, 47-63 Hz
16A @ 180VAC, Full Load (max)
50A max. cold start (per ETS 300 132-1 and Bellcore specifications)
Dual Fused (Line & Neutral) 20 Amp / 250 VAC Type 3AB Axial
0.99 typical complies with IEC555, EN60555-2, EN61000-3-2
92% typical at 230 VAC Full Load Operation (including OR’ing Mosfets)
2500W at High Line Operation (180-264 VAC), 1200W at Low Line Operation (90-132 VAC)
+48 VDC (±10% with remote programming)
52A @48V
5VSB@1A, reference to Vout Return
±2% of Vnom for any combination of line, load and temperature
Complies with ETS300 132-2, 32dBnrc. Bandwidth: 25Hz - 20kHz. 2mVrms pk-pk with 0.1μF ceramic and 10μF
electrolytics caps at the output
5% max deviation Recovery time 300μs @ 50% load step and di/dt < 1A/μs
200kHz (input) / 400kHz (output)
16.8msec (230 VAC full load)
ON if >3V or open; OFF if <1V (max. sink 1mA) Open collector type
110-130% of Iout nominal
Self protected with auto recovery
-60 VDC max, latched. Reset condition by recycling AC input or toggling remote on/off
-10°C to +70°C. power derating above 50°C at 2.5% per °C
Non latching; protection active at 110°C internal temperature, restart at 95°C (typical)
FCC-B & EN55022-B with specified filter or at rack level, GR-1089-CORE
Green = AC OK & DC OK, Red = Fault
Voltage Programming (V Prog), Load sharing (I Share), Remote On/Off, Current Monitor (I Monitor),
Over temperature (Temp Warning), Fault, PS Present, Module Enable
I2C Option and PMBus Option, see detailed specification for details
IEC68-2-27, MIL-STD-810E, Telcordia GR-63-CORE
14.25 x 4.00 x 1.65” / 362 x 102 x 41.9mm
4.73lbs / 2.15kg
IEC/UL/CSA/EN60950-1, CE Mark (LVD), TUV
I2C Interface, PMBus, Bezel, 5VSB Output
Transient Response
Switching Frequency
Hold-Up Time
Remote On/Off
Current Limit Protection
Short Circuit Protection
Over Voltage Protection
Operating Temperature
Over Temperature Protection
EMI
LED Indicators
Analog Status & Control
Digital Status & Control
Shock & Vibration
Dimensions
Weight
Safety Approvals
Options
Reduces logistical costs
KEY MARKET SEGMENTS & APPLICATIONS
∎ Distributed Power
∎ RF Amplifiers
∎ High End Servers
∎ ATE Equipment
∎ High End Routers and Switchgear
∎ Semiconductor Burn-in Equipment
rev 100506
www.lineagepower.com/oem
Lineage Power
Lineage Power
Lineage Power (China)
3000 Skyline Dr.
Mesquite, TX 75149 Phone: (972) 284-2000
2841 Dow Avenue
Tustin, CA 92780 USA Phone: (714) 544-6665
1353 Chenqiao Road, Shanghai Sengpu Industrial Park
Shanghai, 201401 China
Phone: 021 6710 8910
CAR2548FP Series
2500 Watt 48V Front End Power Supply
OUTLINE DRAWING
All Dimensions in Inches (mm)
Tolerance: .XX = ± .02 in (.50 mm)
.XXX = ± .010 in (.254 mm)
PART NUMBER DEFINITION GUIDE:
CONNECTOR DRAWING:
CAR 25 48 F P x x xx -1A
Series
25=2500W
Output Current
48=48V
Output Voltage
F=Front End
Type
P=Positive
Polarity
Examples:
Rev.
Blank=Non-compliant
YO=5 of 6 Compliant
ZO=6 of 6 Compliant
RoHS
Blank = PM Bus
C=I2C
A = CAN Bus
Interface
B=Bezel Option
Blank=None
Options
CAR2548FPBCZO-1A
2500W/48V Front End, Bezel, I2C, 6 of 6 RoHS
CAR2548FPBAZO-1A
2500W/48V Front End, Bezel, CAN Bus 6 of 6
RoHS compliance
D1 D2 D3 D4 D5 D6
P1
P2
P3
C1 C2 C3 C4 C5 C6
B1 B2 B3 B4 B5 B6
P4
P5
P6
P7
A1 A2 A3 A4 A5 A6
Connector FCI Berg P/N 51939-030
Mating connector FCI Berg P/N 51915-051
PIN OUT INFORMATION
A1
VSB 3.3V
B4
Module Enable
D1
V Prog
P4
Vout
A2
VSB 3.3V Return
B5
Serial Data Line
D2
OVP Test Point
P5
Vout
A3
Signal RTN
B6
Serial Data Clock
D3
Remote On/Off
P6
Vout Return
A4
Write Protect
C1
I Share
D4
DC OK
P7
Vout Return
A5
Remote Sense (+)
C2
Protocol Select
D5
AC OK
A6
Remote Sense (-)
C3
Temp Warning
D6
Interrupt
B1
Fault
C4
I2C Address (A0)
P1
Line
B2
I Monitor
C5
I2C Address (A1)
P2
Neutral
B3
PS Present
C6
I2C Address (A2)
P3
Chassis
rev 100506
www.lineagepower.com/oem
Lineage Power
Lineage Power
Lineage Power (China)
3000 Skyline Dr.
Mesquite, TX 75149 Phone: (972) 284-2000
2841 Dow Avenue
Tustin, CA 92780 USA Phone: (714) 544-6665
1353 Chenqiao Road, Shanghai Sengpu Industrial Park
Shanghai, 201401 China
Phone: 021 6710 8910
Similar pages