IRC TT GUS-TSCBLF-02-1002-J Surface mount tssop resistor network Datasheet

Surface Mount TSSOP
Resistor Networks
TSSOP Series
•
•
•
•
•
Absolute tolerances to ±0.1%
Tight TC Tracking to ±5ppm/°C
Ratio match tolerances to ±0.05%
Ultra-stable tantalum nitride resistors
Standard Sn/Pb and Pb-free terminations available
IRC’s TaNSil® TSSOP resistor networks are ideally suited for high volume applications that demand a small, low-profile footprint.
The small wire-bondable chip package provides higher component density, lower resistor cost and high reliability.
The tantalum nitride film system on silicon provides precision tolerance, exceptional TCR tracking, low cost and miniature package.
Excellent performance in harsh, humid environments is a trademark of IRC’s self-passivating TaNSil® resistor film.
For applications requiring high performance resistor networks in a low cost, low profile, surface mount package, specify IRC TSSOP
resistor networks.
Electrical Data
Environmental Data
Resistance Range
10Ω to 250KΩ
Absolute Tolerance
To ±0.1%
Ratio Tolerance to R1
To ±0.05%
Absolute TCR
To ±25ppm/°C
Tracking TCR
To ±5ppm/°C
Typical
Delta R
Max Delta
R
Thermal Shock
±0.02%
±0.1%
Power Conditioning
±0.03%
±0.1%
High Temperature Exposure
±0.03%
±0.5%
Short-time Overload
±0.02%
±0.5%
Low Temperature Storage
±0.03%
±0.5%
Life
±0.05%
±0.1%
Test Per
MIL-PRF-83401
Element Power Rating @ 70°C
Isolated Schematic
100mW
Bussed Schematic
50mW
Package Power Rating @ 70°C
Rated Operating______
Voltage
(not to exceed √ P x R)
Operating Temperature
Noise
16-Pin
20-Pin
24-Pin
800mW
1.0W
1.0W
100 Volts
-55°C to +125°C
<-30dB
General Note
IRC reserves the right to make changes in product specification without notice or liability.
All information is subject to IRC’s own data and is considered accurate at time of going to print.
© IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA
Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com
A subsidiary of
TT electronics plc
TSSOP Series Issue January 2009 Sheet 1 of 4
Surface Mount TSSOP
Resistor Networks
Manufacturing Capabilities
ISOLATED SCHEMATIC A
Absolute
TCR
(±ppm/°C)
BUSSED SCHEMATIC B
Ohmic
Range
(Ω)
Available
Tolerances
Available
Ratio
Tolerances
Best
Tracking
(±ppm/°C)
Ohmic
Range
(W)
Available
Tolerances
Available
Ratio
Tolerances
Best
Tracking
(±ppm/°C)
10 - 25
FGJ
FG
100
10 - 25
FGJ
FG
200
26 - 50
DFGJ
CDFG
50
26 - 50
FGJ
DFG
100
51 - 200
CDFGJ
CDFG
10
51 - 100
DFGJ
CDFG
50
201 - 250K
BCDFGJ
ABCDFG
5
101 - 200
DFGJ
BCDFG
25
201 - 500
BCDFGJ
BCDFG
20
250
501 - 100K
100
BCDFGJ ABCDFG
5
26 - 50
DFGJ
CDFG
50
26 - 50
FGJ
DFG
100
51 - 200
CDFGJ
CDFG
10
51 - 100
DFGJ
CDFG
50
201 - 250K
BCDFGJ
ABFG
5
101 - 200
DFGJ
BCDFG
25
201 - 500
BCDFGJ
BCDFG
20
501 - 100K
BCDFGJ ABCDFG
5
26 - 50
DFGJ
CDFG
50
51 - 100
DFGJ
CDFG
50
51 - 200
CDFGJ
CDFG
10
101 - 200
DFGJ
BCDFG
25
201 - 250K
BCDFGJ
ABFG
5
201 - 500
BCDFGJ
BCDFG
20
50
501 - 100K
51 - 200
CDFGJ
CDFG
10
201 - 500
201 - 250K
BCDFGJ
ABFG
5
501 - 100K
BCDFGJ ABCDFG
5
BCDFGJ
20
BCDFG
25
© IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA
Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com
BCDFGJ ABCDFG
5
TSSOP Series Issue January 2009 Sheet 2 of 4
Surface Mount TSSOP
Resistor Networks
Physical Data
4.4mm ±0.1
6.4 BSC
# OF PINS
DIMENSION "D"
16
5.0mm±0.1
20
6.5mm±0.1
24
7.8mm±0.1
Note: N = number of pins (16, 20, 24)
0.65mm BSC
0.90mm±0.05
R=0.09mm min
1.10 max
0.1mm
SEATING PLANE
0.10mm±0.05
0° - 8°
0.60mm±0.15
1.0mm REF
Note: All dimesions exclude mold flash and
end flash which shall not exceed 0.006" per side.
Drawing proportions not to scale.
Schematic Data
Note: Lead Coplanarity 0.004" max.
Power Derating Curve
N
R1
2
3
Schematic A
Isolated
N
R1
% Of Rated Power
100
1
50
10
1
2
3
Schematic B
Bussed
25°
70°
125°
Temperature in °C
Note: N = number of pins (16, 20, 24)
© IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA
Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com
TSSOP Series Issue January 2009 Sheet 3 of 4
Surface Mount TSSOP
Resistor Networks
Ordering Data
Prefix
GUS - TS8A - 01 - 1002 - F
B
Style, Schematic and Termination
TS8A = 16-pin, 8 Isolated Resistors with standard Sn/Pb terminations
TS8ALF = 16-pin, 8 Isolated Resistors with 100% matte tin, Pb-free terminations
TS8B = 16-pin, 15 Bussed Resistors with standard Sn/Pb terminations
TS8BLF = 16-pin, 15 Bussed Resistors with 100% matte tin, Pb-free terminations
TS0A = 20-pin, 10 Isolated Resistors with standard Sn/Pb terminations
TS0ALF = 20-pin, 10 Isolated Resistors with 100% matte tin, Pb-free terminations
TS0B = 20-pin, 19 Bussed Resistors with standard Sn/Pb terminations
TS0BLF = 20-pin, 19 Bussed Resistors with 100% matte tin, Pb-free terminations
TSCA = 24-pin, 12 Isolated Resistors with standard Sn/Pb terminations
TSCALF = 24-pin, 12 Isolated Resistors with 100% matte tin, Pb-free terminations
TSCB = 24-pin, 23 Bussed Resistors with standard Sn/Pb terminations
TSCBLF = 24-pin, 23 Bussed Resistors with 100% matte tin, Pb-free terminations
Absolute TCR Code
00 = ±250 ppm/°C; 01 = ±100 ppm/°C; 02 = ±50 ppm/°C; 03 = ±25 ppm/°C
Resistance Code
4-Digit Resistance Code
Ex: 1002 = 10KΩ, 50R1 = 50.1Ω
Absolute Tolerance Code
J = ±5%; G = ±2%; F = ±1%; D = ±0.5%; C = ±0.25%; B = ±0.1%
Ratio Tolerance Code (optional)
G = ±2%; F = ±1%; D = ±0.5%; C = ±0.25%; B = ±0.1%; A = ±0.05%
Packaging
Specify tubes or tape & reel.
For additional information or to discuss your specific requirements,
please contact our Applications Team using the contact details below.
© IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA
Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com
TSSOP Series Issue January 2009 Sheet 4 of 4
Similar pages