MCSO2L family package 5×3.2 mm From 40 MHz to 130 MHz LVDS Output DIMENSIONS Package: Bottom view Recommended Solder Pad: 5.00 0.8 1.4 1.6 0.9 1.2 ELECTRICAL CHARACTERISTICS AT +25°C * 1) C = 47nF ceramic must be connected between GND & Vdd differential 2 5 2.35 100% Leadfree, RoHScompliant: SMT LVDS Clock oscillator in ceramic package Fundamental quartz mode frequency High shock and vibration resistance Wide temperature range Low aging Ultra low internal MSL Very fast start-up Excellent solderability Swiss made quality Customer specification on request 1 6 3 4 4 3 5 2 6 1 3.20 pin 1 E/D pin 2 NC pin 3 GND 0.65 pin 4 Fout pin 5 CFout pin 6 Vdd All dimensions in mm typical DESCRIPTION: This SMD oscillator in ceramic package has been specially designed for surface mount using infrared, vapor phase or epoxy techniques. Applications: - Avionics Airborne equipments Remote control Security application Radio Transceiver Microprocessor clocks The MCSO2L's are supplied on trays (128 pcs / tray) For pick-and-place equipment, the parts are available in 12mm tapes with 250 parts min 1000 parts min Frequency stability (standard) Over temperature range (see orderding info) Including: adjustment at 25°C long term aging 10 years over supply voltage ±5% Frequency stability version T Over temperature range (see ordering info) Including: adjustment at +25°C long term aging 1 year over supply voltage ±5% Supply voltage ± 5% 1)* Input current Output signal (load 100 ohm) Symmetry (max) Rise & fall time (20% to 80%) Level Logic low (Typ/min) Level Logic high (Typ/max) Start-up time Jitter RMS (1KHz to 1MHz) Phase noise typical at 100MHz Static conditions 10Hz BW = 1Hz 100Hz 1 kHz 10 kHz 100kHz ΔF/F ≤ ± 100 ppm ΔF/F ≤ ± 50 ppm Vdd Idd 2.5 / 3.3 see table 1 LVDS 45 / 55 <1 1.1 / 0.9 1.4 / 1.6 <5 <0.3 V t -70 -100 -125 -145 -150 % ns V V ms ps dBc/ Hz Table 1: Idd Frequency (Without load) F= 40MHz 100MHz 130MHz W =Vdd = 2.5V < 5mA < 10mA < 20mA V =Vdd = 3.3V < 10mA < 15mA < 25mA STANDARD FREQUENCIES: Frequency «MHz» 40 80 100 128 Other frequencies on request ENVIRONMENTAL CHARACTERISTICS: Storage temp. range -65 to +125°C Vibration resistance (survival) 10 to 2000Hz / 50g Shocks resistance (survival) 5000g / 0.3ms / ½ sine TERMINATIONS AND PROCESSING: Reflow soldering (peak) +260°C / 10s max Package Ceramic 5 x 3.2 x 1.6mm Lids Ceramic Terminations option T3 on request with tinned Ag/Cu/Sn Pin 1 open → Pin 3 Clock H → Clock L → Low E/D option 1 on request Reaction time ˂ 1μs - No power E/D function (pin 1) before Vdd is setting on PRODUCT DESCRIPTION AND ORDERING INFORMATION: MCSO2L V T - C 100MHz E/D T3 XXX W V = Vdd 2.5V = Vdd 3.3V option 1 E/D enable / disable T Blank = ±50ppm = ±100ppm option 2 blank Au plated T3 = tinned A B C X = 0 to 70°C = -40 to 85°C = -55 to 125°C = custom customer spec N° Frequency A unique part number will be generated for each product specification 20xxxx-EA00 xxx pcs (in ESD plastic tray) 200xxx-ML00 xxx pcs (in tape & reel, any quantity) All specifications subject to change without notice. Micro Crystal AG Mühlestrasse 14 CH-2540 Grenchen Switzerland Tel. +41 32 655 82 82 Fax +41 32 655 82 83 [email protected] www.microcrystal.com Version 3.0/05.2017