Aluminum Electrolytic Capacitors/ MD Snap-in Type Series: MD Type: TS ■ Features ● Endurance: 105 °C 2000h ● Improved safety for DC overvoltage ● RoHS directive compliant ■ Specifications Category Temp. Range Rated W.V. Range Nominal Cap. Range Capacitance Tolerance –40 °C to +105 °C 200 V.DC 220 µF to 1500 µF –25 °C to +105 °C 400 V.DC 56 µF to 470 µF ±20 % (120 Hz/+20 °C) 앀CV (µA) max. (200 W.V.), 3앀CV (µA) max. (400 W.V.) After 5 minutes DC Leakage Current application of rated working voltage at 20 °C C : Capacitance (µF) V: W.V. (V.DC) tan δ Please see the attached standard products list. Frequency (Hz) 50 60 100 120 500 1 k 10 k to Frequency Correction Factor for Ripple Current Correction Factor 0.75 0.80 0.95 1.00 1.20 1.25 1.40 After 2000 hours application of DC voltage with specified ripple current (< rated DC working voltage) at +105 °C±2 °C, the capacitors shall meet the following limits. Endurance Capacitance change < ±20 % of initial measured value tan δ < 200 % of initial specified value DC leakage current < initial specified value After storage for 1000 hours at +105 °C±2 °C within no voltage applied and then being stabilized Shelf Life at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) Vent may work to prevent short circuit of fire under the following condition. Condition Cap. R.W.V. (µF) Current DC V. 220 to 270 4 A Overvoltage 200 V 330 to 390 5 A DC 375 V Condition 470 to 1500 7 A 56 to 82 2 A 400 V DC 600 V 100 to 180 4 A 220 to 470 7 A ■ Dimensions in mm (not to scale) φD+1.0 max. Polarity bar (mm) 2-φ2.0±0.1 (1 0.0 Sleeve 10 .0± 0.1 ) Vent L+2.0 max. (φD) 4.0±0.5 Rated voltage etc. indicate to sleeve. Recommended PWB piercing plan 4.0±0.5 +0.2 2.0 max. Terminal (t=0.8) (3.5) 0.8 –0.1 1.5±0.2 Top of spin Standard terminal type does not require terminal trimming process. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Jul. 2008 Aluminum Electrolytic Capacitors/ MD ■ Standard Products Case size W.V. Cap. (120 Hz) (±20 %) (V. DC) (µF) 220 270 330 390 470 560 200 680 820 1000 1200 ✽ 1500 56 68 82 100 120 150 400 180 220 270 330 ✽ 390 470 Dia. Length (mm) 22 22 22 25 22 25 30 22 25 30 22 25 30 35 25 30 35 25 30 35 30 35 30 35 35 22 22 22 25 22 25 30 22 25 30 22 25 30 35 25 30 35 25 30 35 30 35 30 35 35 35 (mm) 25 30 30 25 35 30 25 40 30 25 45 35 30 25 40 30 25 45 35 30 45 30 45 35 45 25 30 30 25 35 30 25 40 30 25 45 35 30 25 40 30 25 45 35 30 40 30 45 35 40 45 Part No. PET sleeve Terminal Length 4.0 mm (Without Top Plate) EETLD2D221BJ EETLD2D271BJ EETLD2D331BJ EETLD2D331CJ EETLD2D391BJ EETLD2D391CJ EETLD2D391DJ EETLD2D471BJ EETLD2D471CJ EETLD2D471DJ EETLD2D561BJ EETLD2D561CJ EETLD2D561DJ EETLD2D561EJ EETLD2D681CJ EETLD2D681DJ EETLD2D681EJ EETLD2D821CJ EETLD2D821DJ EETLD2D821EJ EETLD2D102DJ EETLD2D102EJ EETLD2D122DJ EETLD2D122EJ EETLD2D152EJ EETLD2G560BJ EETLD2G680BJ EETLD2G820BJ EETLD2G820CJ EETLD2G101BJ EETLD2G101CJ EETLD2G101DJ EETLD2G121BJ EETLD2G121CJ EETLD2G121DJ EETLD2G151BJ EETLD2G151CJ EETLD2G151DJ EETLD2G151EJ EETLD2G181CJ EETLD2G181DJ EETLD2G181EJ EETLD2G221CJ EETLD2G221DJ EETLD2G221EJ EETLD2G271DJ EETLD2G271EJ EETLD2G331DJ EETLD2G331EJ EETLD2G391EJ EETLD2G471EJ Specification Ripple tan δ Current (120 Hz) (120 Hz) (+20 °C) (+105 °C) max. (A r.m.s.) 1.00 0.15 1.10 0.15 1.20 0.15 1.20 0.15 1.35 0.15 1.35 0.15 1.35 0.15 1.45 0.15 1.45 0.15 1.45 0.15 1.60 0.15 1.60 0.15 1.60 0.15 1.60 0.15 1.75 0.15 1.75 0.15 1.75 0.15 2.11 0.15 2.11 0.15 2.11 0.15 2.40 0.15 2.40 0.15 2.65 0.15 2.65 0.15 3.08 0.15 0.45 0.15 0.51 0.15 0.58 0.15 0.58 0.15 0.66 0.15 0.66 0.15 0.66 0.15 0.78 0.15 0.78 0.15 0.78 0.15 0.85 0.15 0.85 0.15 0.85 0.15 0.85 0.15 0.95 0.15 0.95 0.15 0.95 0.15 1.24 0.15 1.24 0.15 1.24 0.15 1.30 0.15 1.30 0.15 1.47 0.15 1.47 0.15 1.59 0.15 1.87 0.15 Min. Packaging Q'ty (pcs) 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 200 100 200 100 100 100 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 200 100 200 100 100 100 100 Endurance : 105 °C 2000 h, Terminal Pitch : 10 mm ✽ When capacitors of φ35×45L and φ35×50L are mounted on PWB, reinforce them with mounting clamp or adhesives. (Avoid using adhesives including halogenated compositions.) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Jul. 2008