GBJ15005 THRU GBJ1510 SINGLE PHASE 15.0AMP GLASS PASSIVATED BRIDGE RECTIFIER Features GBJ · Glass passivated die construction · Low forward voltage drop · High current capability .189(4.8) .173(4.4) 1.193(30.3) 1.169(29.7) · High surge current capability · Plastic material-UL flammability 94V-0 .215(5.2) .196(4.8) .800(20.3) + Mechanical Data ~ .106(2.7) .096(2.3) · Case: Moeded plastic, GBJ · Terminals: Plated Leads Solderable per · · · · .150(3.8) .134(3.4) ~ - .706(18.0) .626(16.0) .165(4.2) .150(3.8) .090(2.3) .078(2.0) MIL-STD-202, Method 208 Polarity: As Marked on Case Mounting Position: Any Marking: Type Number Lead Free: For RoHS / Lead Free Version .787(19.7) .441(11.2) .425(10.8) .043(1.1) .035(0.9) .433(11) .354(9.0) .110(2.8) .094(2.4) .184(3.4) .122(3.1) .023(0.6) .303(7.7) .287(7.3) .303(7.7) .287(7.3) dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25℃ ambient temperature unless otherwise specified. Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. GBJ SYMBOL 15005 VRRM 50 VRWM TYPE NUMBER Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage GBJ GBJ 1501 1502 1504 GBJ GBJ GBJ 1506 1508 GBJ 1510 UNITS 100 200 400 600 800 1000 V 70 140 280 420 560 700 V VDC RMS Reverse Voltage VRMS IO Average Rectified Output Current (Note 1)@TA =90℃ Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) 35 A 15.0 IFSM 200 A VFM 1.0 1.1 V IR 5.0 500 uA CJ 60 pF Between junction and ambient, Without heatsink RθJA 12 Between junction and case, With heatsink RθJC 1.5 @IF=7.5A @IF=15A Forward Voltage per element Peak Reverse Current At Rated DC Blocking Voltage @TA =25 ℃ @TA =125 ℃ Typical Junction Capacitance per leg Operating and Storage Temperature Range TJ,TSTG ℃/W ℃ -55to+150 2 Note:1. Mounted on glass epoxy PC board with 1.3mm solder pad. version:01 1 of 2 www.sddydz.com AVERAGE FORWARD RECTIFIED CURRENT (A) GBU15005 THRU GBU1510 16.0 12.0 8.0 Single Phase Half Wave 60Hz Resistive or inductive Load with heatsink 4.0 0 150 100 50 200 I (AV), 0 IF, INSTANTANEOUS FORWARD CURRENT (A) Fig. 1 Output Current Derating Curve 240 210 180 150 120 90 TA = 25°C Single Half Sine-Wave Pulse Width = 8.3ms (JEDEC Method) 0 10 1 0.3 0.03 0.4 TA= 25°C Pulse Width = 300 µs 0.6 0.8 1.0 1.4 1.2 1.6 100 NUMBER OF CYCLES AT 60 Hz Fig. 4 Typical Junction Capacitance INSTANTANEOUS REVERSE CURRENT, MICROAMPERES IFSM, PEAK FORWARD SURGE CURRENT (A) Fig. 3 Maximum Peak Forward Surge Current (per leg) 30 3 VF, INSTANTANEOUS FORWARD VOLTAGE (V) TA, AMBIENT TEMPERATURE (°C) 60 Fig. 2 Typical Forward Characteristics (per leg) 30 10 1.0 T A=25°C 0.1 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE FIG.5 TYPICAL REVERSE CHRACTERISTICS INVSTANTANEOUS REVERSE CURRENT (µA) 100 Tj=150℃ 10 1.0 Tj=25℃ 0.1 0.01 0 20 40 60 80 100 PERCENT OF RATED PEAK INVERSE VOLTGE (V) version:01 2 of 2 www.sddydz.com