HIGH OUTPUT RED LED OD-624L FEATURES • Narrow beam angle • Convenient TO-5 package with leads • Hermetic package Dimensions are nominal values in inches unless otherwise specified. RoHS ELECTRO-OPTICAL CHARACTERISTICS AT 25°C PARAMETERS Total Power Output, Po Peak Emmision Wavelength, λP TEST CONDITIONS IF = 350mA Spectral Bandwidth at 50%, Δλ IF = 350mA Half Intensity Beam Angle, θ IF = 350mA Dominant Wavelength, λd Forward Voltage, VF Reverse Breakdown Voltage, VR IF = 350mA IR = 5μA MIN 80 TYP 170 MAX 635 nm 40 nm 624 nm 7 2.3 10 UNITS mW Deg 3.0 Volts Volts ABSOLUTE MAXIMUM RATINGS AT 25°C Continuous Forward Current 500mA Lead Soldering Temperature (1/16" from case for 10sec) 260°C Reverse Voltage 10V THERMAL PARAMETERS Storage and Operating Temperature Range -55°C TO 100°C Thermal Resistance, RTHJA1 150°C/W Typical Maximum Junction Temperature Thermal Resistance, RTHJA2 115°C 60°C/W Typical 1 Heat transfer minimized by measuring in still air with minimum heat conducting through leads. 2 Air circulating at a rapid rate to keep case temperature at 25°C. 750 Mitchell Road, Newbury Park, California 91320 Phone: (805) 499-0335, Fax: (805) 499-8108 Email: [email protected], Website: www.optodiode.com HIGH OUTPUT RED LED OD-624L 1,300 THERMAL DERATING CURVE 1,200 POWER DISSIPATION (mW) 1,100 1,000 INFINITE HEAT SINK 900 800 700 600 500 NO HEAT SINK 400 300 200 100 0 RELATIVE POWER OUTPUT (%) 100 25 50 75 AMBIENT TEMPERATURE (°C) 100 RADIATION PATTERN 80 60 40 20 0 –25 –20 –15 –10 –5 0 5 10 BEAM ANGLE, θ(deg) 15 20 25 750 Mitchell Road, Newbury Park, California 91320 Phone: (805) 499-0335, Fax: (805) 499-8108 Email: [email protected], Website: www.optodiode.com