2-Line Filters B84103 for General-Purpose Applications Power line filters for single-phase systems Rated voltage 250 V~, 50/60 Hz Rated current 1 to 6 A Construction ■ Filter with IEC connector, fuse holder and switch ■ Appliance connector as per IEC 60320 ■ Fuse holder 5 × 20 mm ■ 2-pole disconnector Features ■ Enhanced differential-mode insertion loss ■ For installation in instrument housings Applications ■ Medium-performance switch-mode power supplies ■ Industrial electronics ■ Measuring instruments Terminals ■ Tab connector 6,3 x 0,8 mm at output Marking Marking on component: Manufacturer’s logo, ordering code, rated voltage, rated current, date code Minimum marking on packaging: Manufacturer’s logo, ordering code Circuit diagram LOAD L’ IEC Connector IEC-Stecker LINE L N N’ SSB0207-F 196 03/01 2-Line Filters B84103 for General-Purpose Applications Technical data Rated voltage V R 250 V~, 50/60 Hz Rated current IR Referred to 40 °C ambient temperature Test voltage V P 1414 V–, 2 s (line/line) 2700 V–, 2 s (lines/case) Leakage current l leak < 1 mA at 230 V~, 50 Hz Climatic category In accordance with EN 60068-1 25/085/21 (– 25 °C/+ 85 °C/21 days damp heat test) Weight approx. 150 g Characteristics and ordering codes CR LR Ordering code Approvals 1 0,33 µF (X2) + 2 × 10 nF (Y2) 2 × 9 mH + 2 × 270 µH B84103-S1-A10 × × × 3 0,33 µF (X2) + 2 × 10 nF (Y2) 2 × 1,5 mH + 2 × 22 µH B84103-S1-A30 × — × 6 0,33 µF (X2) + 2 × 10 nF (Y2) 2 × 0,47 mH + 2 × 8 µH B84103-S1-A60 × — × IR A 565-3 × = approval granted 197 03/01 2-Line Filters B84103 for General-Purpose Applications Dimensional drawing Mounting version II Mounting direction Mounting version I Mounting direction Tab connector Mounting holes for mounting version I Mounting holes for mounting version II M3 or Ø 3,5 198 03/01 2-Line Filters B84103 for General-Purpose Applications Insertion loss (typical values at Z = 50 Ω) unsymmetrical, adjacent branches terminated common mode, all branches in parallel (asymmetrical) differential mode (symmetrical) B84103-S1-A10 B84103-S1-A30 SSB0210-Z 100 αe dB αe dB 80 80 60 60 40 40 20 20 0 10 4 10 5 10 6 10 7 Hz 10 8 f SSB0211-8 100 0 10 4 B84103-S1-A60 SSB0212-G 100 αe dB 80 60 40 20 0 10 4 10 5 10 6 10 7 Hz 10 8 f 199 03/01 10 5 10 6 10 7 Hz 10 8 f Herausgegeben von EPCOS AG Marketing Kommunikation, Postfach 80 17 09, 81617 München, DEUTSCHLAND EPCOS AG 2000. Alle Rechte vorbehalten. Vervielfältigung, Veröffentlichung, Verbreitung und Verwertung dieser Broschüre und ihres Inhalts ohne ausdrückliche Genehmigung der EPCOS AG nicht gestattet. Mit den Angaben in dieser Broschüre werden die Bauelemente spezifiziert, keine Eigenschaften zugesichert. Bestellungen unterliegen den vom ZVEI empfohlenen Allgemeinen Lieferbedingungen für Erzeugnisse und Leistungen der Elektroindustrie, soweit nichts anderes vereinbart wird. Diese Broschüre ersetzt die vorige Ausgabe. Fragen über Technik, Preise und Liefermöglichkeiten richten Sie bitte an den Ihnen nächstgelegenen Vertrieb der EPCOS AG oder an unsere Vertriebsgesellschaften im Ausland. Bauelemente können aufgrund technischer Erfordernisse Gefahrstoffe enthalten. Auskünfte darüber bitten wir unter Angabe des betreffenden Typs ebenfalls über die zuständige Vertriebsgesellschaft einzuholen. Published by EPCOS AG Marketing Communications, P.O. Box 80 17 09, 81617 Munich, GERMANY EPCOS AG 2000. All Rights Reserved. Reproduction, publication and dissemination of this brochure and the information contained therein without EPCOS’ prior express consent is prohibited. The information contained in this brochure describes the type of component and shall not be considered as guaranteed characteristics. Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. 1