SIPAT Co.,Ltd www.sipatsaw.com China Electronics Technology Group Corporation No.26 Research Institute LBN08021 SAW Filter Electrical Characteristic Specifications Parameter Unit Minimum Typical Maximum Center Frequency MHz 79.9 80 80.1 Insertion Loss dB - 26.5 28 Bandwidth MHz 19 - - f0±9.55MHz dB - 1.2 1.5 f0±9.9MHz dB 22.5 25 - f0±10.1MHz dB 30 33 - f0±10.5MHz dB 35 37 - Ultimate Rejection(f ± 13.5MHz 以外) dB - 40 - Passband variation dB - - 1.5 Absolute Delay usec - - 3 Rejection Substrate Material YZ-LN Ambient Temperature 25°C Operation Temperature -40～+85°C (35x12.7x5.2mm3) DIP3512 Package Size Typical Performance Type performance -25.9603 -35.9603 Magnitude(dB) -45.9603 -55.9603 -65.9603 -75.9603 -85.9603 -95.9603 56 Package Outline 62 68 74 80 86 Frequency(MHz) 92 98 104 Matching Configuration L1＝33nH L2＝100nH Source/Load Impedance=50 ohm Notes - Component values may change depending on board layout. P.O. Box 2513 Chongqing, China 400060 Tel:+86-23-62920684 Fax:62805284 E-mail: [email protected]