Through Hole Lamp Product Data Sheet LTL-14AWJ Spec No.: DS-20-92-0309 Effective Date: 08/17/2000 Revision: - LITE-ON DCC RELEASE BNS-OD-FC001/A4 LITE-ON Technology Corp. / Optoelectronics No.90,Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C. Tel: 886-2-2222-6181 Fax: 886-2-2221-1948 / 886-2-2221-0660 http://www.liteon.com/opto LITE-ON ELECTRONICS, INC. Property of Lite-On Only Features * AlGaAs Red and Green chips are matched for uniform light output. * T-1 type package. * Long life solid state reliability. * Low power consumption. * I.C compatible. Package Dimensions Part No. Lens Source Color LTL-14AWJ White Diffused AlGaAs Red / Green NOTES: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25mm(.010") unless otherwise noted. 3. Protruded resin under flange is 1.0mm (.04”) max. 4. Lead spacing is measured where the leads emerge from the package. 5. Specifications are subject to change without notice. Part No. : LTL-14AWJ BNS-OD-C131/A4 Page : 1 of 4 LITE-ON ELECTRONICS, INC. Property of Lite-On Only Absolute Maximum Ratings at TA=25℃ Parameter Green Unit 100 100 mW 200 120 mA Continuous Forward Current 40 30 mA Derating Linear From 50℃ 0.5 0.4 mA/℃ Power Dissipation AlGaAs Red Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) Operating Temperature Range -55℃ to + 100℃ Storage Temperature Range -55℃ to + 100℃ Lead Soldering Temperature [1.6mm(.063") From Body] Part No. : LTL-14AWJ BNS-OD-C131/A4 260℃ for 5 Seconds Page : 2 of 4 LITE-ON ELECTRONICS, INC. Property of Lite-On Only Electrical Optical Characteristics at TA=25℃ Parameter Luminous Intensity Symbol Iv Color Min. Typ. AlGaAs Red 3.7 12.6 Green 1.1 3.7 Max. Unit Test Condition IF = 20mA mcd IF = 20mA Note 1,4 Viewing Angle Peak Emission Wavelength Dominant Wavelength Spectral Line Half-Width Forward Voltage Reverse Current 2θ1/2 λp λd Δλ VF IR AlGaAs Red 200 Green 200 AlGaAs Red 660 Green 565 AlGaAs Red 638 Green 569 AlGaAs Red 20 Green 30 AlGaAs Red 1.8 2.4 Green 2.1 2.6 deg nm Note 2 (Fig.6) Measurement @Peak (Fig.1) nm Note 3 nm AlGaAs Red 100 Green 100 V IF = 20mA IF = 20mA μA VR = 4V VR = 5V Note 5 Capacitance C AlGaAs Red 30 Green 35 pF VF = 0 , f = 1MHz Note: 1. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE (Commission International De L'Eclairage) eye-response curve. 2. θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity. 3. The dominant wavelength, λd is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. 4. The Iv guarantee should be added ±15%. 5. Reverse current is controlled by dice source. Part No. : LTL-14AWJ BNS-OD-C131/A4 Page : 3 of 4 LITE-ON ELECTRONICS, INC. Property of Lite-On Only Typical Electrical / Optical Characteristics Curves (25℃ Ambient Temperature Unless Otherwise Noted) Part No. : LTL-14AWJ BNS-OD-C131/A4 Page : 4 of 4