IPSLAT series Low Range, Intrinsically Safe Pressure Sensor Approvals:ATEX / IECEx EII Ex ia IIC T4 Ga Ta (see schedule) Piezo-resistive sensor Stainless steel body & diaphragm Accuracy <±0.25% FS BFSL Pressure ranges from 50 mbar to 1000 mbar Gauge or Absolute pressure reference The IPSLAT is suitable for use in a wide range of applications in hazardous areas. The probe uses a piezo-resistive silicon sensor, giving excellent media compatibility within an oil filled 316L stainless steel housing The electronics incorporate a microprocessor based amplifier, requiring no adjusting and giving stable electronics, especially in high vibration/shock applications. Each device is temperature compensated, calibrated and supplied with a traceable serial number and calibration certificate. There is a choice of internal O ring seals to ensure that the device is compatible with a wide range of media. Material Specifications Housing “O” ring seals Diaphragm Media wetted parts Miscellaneous Weight Installation position Operational Life Insulation resistance Performance Accuracy (Non-Linearity & Hysteresis)<±0.25% / FS (BFSL) for gauge, <±0.5% for Absolute Setting Errors (offsets) Zero & Full Scale, <±0.5% / FS Options available on the IPSLAT pressure transmitter. Pressure range Pressure reference (G or Abs) 316 Stainless Steel Viton 316L Stainless Steel Housing & connection, “O” ring seal, diaphragm Approx 100g Any, small zero shift when tilted through 90º > 100x 106 cycles > 50MOhms at 50Vdc Cynergy3 Components Ltd. 7 Cobham Road Ferndown Industrial Estate Wimborne, Dorset BH21 7PE Telephone +44 (0) 1202 897969 Email:[email protected] 2-wire ISO9001C E R T I F I E D Electrical Protection Supply reverse polarity Electromagnetic compatibility Mechanical Stability Shock Vibration Environment & Thermal Effects Media Temperature Storage temperature Compensated temperature range Thermal Zero Shift (TZS) Thermal Span Shift Permissible environment zone 0 No damage/no function CE Compliant 100g / 11s 10g RMS (20 - 2000Hz) -20ºC to +120ºC -40ºC to +110ºC +20ºC to +80ºC <±0.04% /FS/ºC <-0.015% /ºC -20ºC to +60ºC with patm 0.8 to 1.1 bar www.cynergy3.com IPSLAT 2016 © 2016 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited. IPSLAT series Low Range, Intrinsically Safe Pressure Sensor Pressure Ranges Nominal Pressure, Gauge, mbar Nominal Pressure, Absolute mbar Permissible Overpressure mbar Output Signal and Supply Voltage Wire system Output 2-wire 4-20mA 50 100 250 2 bar 2 bar 2 bar DIN 43650 Supply Volts 10-28Vdc Part No IPSLAT-G0050-5 IPSLAT-G0100-5 IPSLAT-G0250-5 IPSLAT-G0500-5 IPSLAT-G0750-5 IPSLAT-G1000-5 IPSLAT-A0500-5 IPSLAT-A0750-5 IPSLAT-A1000-5 500 500 5 bar Connection +ve Supply -ve Supply Ground 750 750 5 bar 1000 1000 5 bar Pin No. Pin 1 Pin 2 Earth pin Pressure Range 0 - 50mbar G 0 - 100mbar G 0 - 250mbar G 0 - 500mbar G 0 - 750mbar G 0 - 1000mbar G 0 - 500mbar Abs 0 - 750mbar Abs 0 - 1000mbar Abs Custom versions can be made for particular applications Mechanical Dimensions 1/4"BSP Male ISO9001C E R T I F I E D www.cynergy3.com © 2016 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.