^ϳϬt^ WůĂƐƚŝĐͲŶĐĂƉƐƵůĂƚĞ^ĐŚŽƚƚŬLJĂƌƌŝĞƌŝŽĚĞƐ PRIMARY CHARACTERISTICS SOD-323 PD 200mV VRRM 70V IF 70mA VF@IF=1mA 410mV TJ Max 125℃ PACKAGE MARKING: K73 FEATURES MECHANICAL DATA Low Turn-on voltage Case：Molded plastic,SOD-323 Fast Switching Polarity：Shown above PN Junction Guard for Transient Terminals :Plated terminals, and ESD Protection solderable per MIL-STD-750,Method Designed for Surface Mount 2026 Application Moisture Sensitivity Level 1 Epoxy : UL94-V0 rated flame retardant Maximum Ratings and Electrical Characteristics, Single Diode @Ta=25 Parameter Symbol Peak Repetitive Peak Reverse Voltage VRRM Working Peak Reverse Voltage VRWM Limit Unit 70 V DC Blocking V oltage VR Forward Continuous Current IF 70 mA IFSM 100 mA Power Dissipation PD 200 mW Thermal Resistance from Junction to Ambient RθJA 500 ℃/W Operating temperature TJ -55 ~+125 ℃ Storage Temperature TSTG -55 ~+150 ℃ Peak Forward Surge Current @t<1.0s Electrical Ratings @Ta=25℃ Parameter Symbol Min Typ Max Unit Conditions VF1 0.41 V IF=1mA VF2 1 V IF=15mA Reverse current IR 120 nA VR=50V Capacitance between terminals CT 2 pF VR=0V,f=1MHz 5 ns Forward voltage Reverse recovery time 2016.07 trr www.willas.com.tw IF=IR=10mA Irr=0.1XIR,RL=100Ω Rev.:0Ϯ ^ϳϬt^ WůĂƐƚŝĐͲŶĐĂƉƐƵůĂƚĞ^ĐŚŽƚƚŬLJĂƌƌŝĞƌŝŽĚĞƐ Typical Characteristics Forward 20 Characteristics Reverse 100 Characteristics 30 10 (uA) =2 5℃ REVERSE CURRENT IR a T =1 00 ℃ a 3 T FORWARD CURRENT IF (mA) 10 1 0.3 Ta=100℃ 3 1 0.3 0.1 0.03 Ta=25℃ 0.01 3E-3 0.1 0.0 0.2 0.4 0.6 FORWARD VOLTAGE 0.8 VF 1E-3 1.0 5 10 15 20 25 REVERSE VOLTAGE Capacitance Characteristics 5 0 (V) 30 VR 35 40 (V) Power Derating Curve 250 Ta=25℃ 3 2 1 0 0 5 10 REVERSE VOLTAGE 2016.07 200 PD (mW) 4 POWER DISSIPATION CAPACITANCE BETWEEN TERMINALS CT (pF) f=1MHz 15 VR 20 150 100 50 0 0 (V) 25 50 75 AMBIENT TEMPERATURE www.willas.com.tw 100 Ta 125 (℃ ) Rev.:0Ϯ ^ϳϬt^ WůĂƐƚŝĐͲŶĐĂƉƐƵůĂƚĞ^ĐŚŽƚƚŬLJĂƌƌŝĞƌŝŽĚĞƐ Outline Drawing SOD-323 .075(1.90) .059(1.50) .045(1.15) .010(0.25) .016(0.40) .091(2.30) .057(1.45) .106(2.70) .043(1.10) .031(0.80) .004(0.10)MAX. .008(0.20) .004(0.10) .016(0.40) .010(0.25) .010(0.25)MIN. Dimensions in inches and (millimeters) Rev.C 2016.07 www.willas.com.tw Rev.:0Ϯ ^ϳϬt^ WůĂƐƚŝĐͲŶĐĂƉƐƵůĂƚĞ^ĐŚŽƚƚŬLJĂƌƌŝĞƌŝŽĚĞƐ Suggested Soldering Pad Layout SOD-323 .057(1.45) .033(0.83) .027(0.70) Dimensions in inches and (millimeters) 2016.07 www.willas.com.tw RevA Rev.:0Ϯ ^ϳϬt^ WůĂƐƚŝĐͲŶĐĂƉƐƵůĂƚĞ^ĐŚŽƚƚŬLJĂƌƌŝĞƌŝŽĚĞƐ 2016.07 www.willas.com.tw Rev.:0Ϯ ^ϳϬt^ WůĂƐƚŝĐͲŶĐĂƉƐƵůĂƚĞ^ĐŚŽƚƚŬLJĂƌƌŝĞƌŝŽĚĞƐ Ordering Information: Device PN BAS70WS ‐T(1)G(2)‐WS Packing Tape&Reel: 3 Kpcs/Reel Note: (1) Packing code, Tape & Reel Packing (2) RoHS product for packing code suffix ”G”；Halogen free product for packing code suffix “H” ***Disclaimer*** WILLAS reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. WILLAS or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on WILLAS data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. WILLAS does not assume any liability arising out of the application or use of any product or circuit. WILLAS products are not designed, intended or authorized for use in medical, life‐saving implant or other applications intended for life‐sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of WILLAS. Customers using or selling WILLAS components for use in such applications do so at their own risk and shall agree to fully indemnify WILLAS Inc and its subsidiaries harmless against all claims, damages and expenditures. 2016.07 www.willas.com.tw Rev.:0Ϯ