CMM2306 Product Specifications January 1996 800 to 2700 MHz Broadband Driver Amplifier (1 of 4) Features ❏ +17.5 dBm Output Power ❏ Low Current: 70 mA, Typ. ❏ 800 – 2700 MHz Operation ❏ Single +3V to +6V Supply ❏ Input and Output Matched to 50Ω, DC Blocked ❏ Low-Cost SOIC-8 Plastic Package Functional Block Diagram Applications ❏ Power Amplifier Drivers ❏ Diode-Ring Mixer Buffers ❏ PCS Medium Power Amplifiers ❏ Medium Power WLANs ❏ Base Station Receivers Vd 1 8 GND GND 2 7 GND RF IN 3 6 RF OUT GND 4 5 GND will drop into existing sockets and offers the same single supply, broadband, 50Ω matched and DC blocked input and output features and performance, that the industry has come to expect, with much higher efficiency and lower current. Packaged in a low-cost surface mount SOIC-8 package, the CMM2306 offers superior performance to existing alternatives at a competitive price. Description The Celeritek CMM2306 is a premium performance, pin-for-pin compatible second source for the TriQuint® 9132 and the Mini-Circuits® VNA. Providing higher gain and lower noise figure than either of the existing standard amplifiers at 25% less drain current, the CMM2306 is an excellent choice for power sensitive applications, while delivering more design margin than either of the existing alternatives. This device Absolute Maximum Ratings Parameter Rating Parameter Rating Parameter Rating Drain Voltage (+Vd) Drain Current (Id) RF Input Power +7 V 150 mA 15 dBm Power Dissipation Thermal Resistance Storage Temperature 1.0 W 55°C/W -65°C to +150°C Operating Temperature Channel Temperature Soldering Temperature -40°C to +80°C 175°C 260°C for 5 Sec Recommended Operating Conditions Parameter Typ Units Parameter Typ Units Drain Voltage (+Vd) 3.0 to 6.0 Volts Operating Temperature (PC Board) -40 to +70 °C Electrical Characteristics The following specifications are guaranteed at room temperature with drain voltage (+Vd) = 5.0 V ±5% at 2.5 GHz. Parameter Condition Frequency Range Small Signal Gain Noise Figure Power Output @ 1 dB Compression Output 3rd Order Intercept Input Return Loss Output Return Loss DC Supply Current Supply Voltage Min 800 18.5 15.5 3 Typ 20 3.5 17 27 8 10 70 5 Max Units 2700 MHz dB dB dBm dBm dB dB mA V 80 6 TriQuint and Mini-Circuits are trademarks of their respective corporations. 3236 Scott Boulevard Santa Clara, California 95054 Phone: (408) 986-5060 Fax: (408) 986-5095 Product Specifications - January 1996 CMM2306 (2 of 4) Connection Diagram and Pin Description Vd 1 8 GND GND 2 7 GND RF IN 3 6 RF OUT GND 4 5 GND Pin # 1 2 3 4 5 6 7 8 Name +Vd GND RF IN GND GND RF OUT GND GND Description Drain voltage. Connect to positive supply. Ground. RF input (Internally DC blocked). Ground. Ground. RF output (Internally DC blocked). Ground. Ground. Test Circuit Diagram Typical Performance The following typical performance parameters were tested in the test circuit shown at room temperature and with a drain voltage (+Vd) = 5 V, unless otherwise specified. 1 8 2 7 3 6 4 5 +5V 0.01µF Gain vs Frequency vs Vd 30 RF IN Gain (dB) 26 22 18 3V 4V 5V 6V 14 10 500 1000 1500 2000 Frequency (MHz) 2500 3000 Gain vs Frequency vs Temperature @ 5V Gain vs Vd vs Temperature@ 1.8 GHz 32 30 -20°C 0°C +25°C +70°C 26 28 Gain (dB) Gain (dB) 29 23 20 26 -20°C 0°C +25°C +70°C 24 22 17 800 900 20 2400 2500 1500 1800 2000 Frequency (MHz) 3 Power Output (P-1) vs Frequency vs Temperature @ 5V Power Output (P-1) (dBm) -20°C 0°C +25°C +70°C 20 19 18 17 16 800 900 1500 1800 2000 Frequency (MHz) 2400 2500 6 4 5 Supply Voltage (V d ) Power Output (P-1) vs Frequency vs V d @ 25°C 21 Power Output (P-1) (dBm) RF OUT 24 3V 5V 6V 21 18 15 12 9 800 900 1500 1800 2000 Frequency (MHz) 2400 2500 3236 Scott Boulevard, Santa Clara, California 95054 Phone: (408) 986-5060 Fax: (408) 986-5095 CMM2306 Product Specifications - January 1996 (3 of 4) Typical Performance (Continued) OIP3 vs Frequency vs Vd @ 25°C 30 3.25 27 3.00 24 OIP3 Noise Figure (dB) Noise Figure vs Frequency vs V d @ 25°C 3.50 2.75 3V 5V 6V 2.50 2.25 800 900 21 3V 5V 6V 18 1500 1800 2000 Frequency (MHz) 15 800 900 2400 2500 2400 2500 1500 1800 2000 Frequency (MHz) OIP3 vs Frequency vs Temperature @ 5V Noise Figure vs Frequency vs Temperature @ 5V 30 3.50 27 +25°C 3.00 OIP3 Noise Figure (dB) +70°C 3.25 2.75 24 21 -20°C 18 2.50 2.25 800 900 1500 1800 2000 Frequency (MHz) -20°C 0°C +25°C +70°C 15 800 900 2400 2500 S 22 vs Frequency vs Vd 0 -4 -4 Output RL (S22) Input RL (S11) S11 vs Frequency vs V d 0 -8 3V 4V 5V 6V -12 -16 -20 500 1000 1500 2000 Frequency (MHz) -12 3V 4V 5V 6V -16 -20 500 3000 2500 -8 1000 2500 3000 2500 3000 -15 24 Power Out 15 18 10 12 Efficiency 6 5 0 -14 3236 Scott Boulevard -8 Power In (dBm) -2 4 Santa Clara, California 95054 Reverse Gain (S 22) 30 Efficiency (%) Power Out (dBm) Vd = 4.8 V & Frequency = 1.88 GHz 20 0 -20 1500 2000 Frequency (MHz) S 12 vs Frequency vs Vd Power In vs Power Out & Efficiency 25 2400 2500 1500 1800 2000 Frequency (MHz) -25 -35 -45 3V 4V 5V 6V -55 -65 500 1000 1500 2000 Frequency (MHz) Phone: (408) 986-5060 Fax: (408) 986-5095 Product Specifications - January 1996 CMM2306 (4 of 4) Test Configuration and Evaluation Adjacent Channel Power Celeritek tests the CMM2306 on an FR4 PC test board. FR4 was chosen for its low loss characteristics at frequencies up to 2.5GHz. Plated through hole connections from the top of the board to the backside ground plane minimizes inductance in the ground connections. These through hole connections are as close as possible to each ground pin. For evaluation purposes Celeritek offers a prototype evaluation board (PB-CMM2306-AJ) for the CMM2306. Please call the factory or a local representative for more information. π/4 DQPSK Modulation, Vd = 4.8 V Handling Precaution Microwave devices are sensitive to electrostatic discharge. Proper precautions should be taken to avoid ESD damage. Physical Dimensions Ordering Information The CMM2306 is available in a surface mount SOIC-8 plastic package. Part Number for Ordering CMM2306-AJ CMM2306-AJ-000T Package SOIC-8 surface mount narrow body plastic package SOIC-8 package in tape and reel Celeritek reserves the right to make changes without further notice to any products herein. Celeritek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Celeritek assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters can and do vary in different applications. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Celeritek does not convey any license under its patent rights nor the rights of others. Celeritek products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Celeritek product could create a situation where personal injury or death may occur. Should Buyer purchase or use Celeritek products for any such unintended or unauthorized application, Buyer shall indemnify and hold Celeritek and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Celeritek was negligent regarding the design or manufacture of the part. Celeritek is a registered trademark of Celeritek, Inc. Celeritek, Inc. is an Equal Opportunity/Affirmative Action Employer. 3236 Scott Boulevard, Santa Clara, California 95054 Phone: (408) 986-5060 Fax: (408) 986-5095