CKR24 Series PRODUCT SELECTION Description 4.5-32 VDC Control 90-280 VAC Control 18-36 VAC Control AVAILABLE OPTIONS 10 A 20 A CKRD2410 CKRA2410 CKRA2410E 30 A CKRD2420 CKRA2420 CKRA2420E CKRD2430 CKRA2430 CKRA2430E OUTPUT SPECIFICATIONS (1) Description Operating Voltage (47-63Hz) [Vrms] Transient Overvoltage [Vpk] Maximum Off-State Leakage Current @ Rated Voltage [mArms] Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (2) Maximum Load Current [Arms] Minimum Load Current [Arms] Maximum Surge Current (16.6ms) [Apk] Maximum On-State Voltage Drop @ Rated Current [Vpk] Maximum I² t for Fusing (8.3 msec) [A² sec] Minimum Power Factor (with Maximum Load) 24-280 600 10 500 10 0.15 120 1.6 60 0.5 24-280 600 10 500 20 0.15 250 1.6 260 0.5 24-280 600 10 500 30 0.15 625 1.6 1620 0.5 INPUT SPECIFICATIONS (1) Description Control Voltage Range Maximum Turn-On Voltage Minimum Turn-Off Voltage Typical Input Current (4) Maximum Turn-On Time [msec] (3) Maximum Turn-Off Time [msec] GENERAL SPECIFICATIONS Description Dielectric Strength, Input/Output/Base (50/60Hz) Minimum Insulation Resistance (@ 500 V DC) Maximum Capacitance, Input/Output Ambient Operating Temperature Range Ambient Storage Temperature Range Status Indicator Display Weight (typical) Encapsulation Terminals Maximum Wire Size: Recommended Terminal Screw Torque Range: Min. Side by Side Spacing 4.0-32 VDC 4.0 VDC 1.0 VDC 8-12 mA 1/2 Cycle 1/2 Cycle 90-280 Vrms 90 Vrms 10 Vrms 2 mA @ 120 Vrms, 4 mA @ 240 Vrms 10 40 18-36 Vrms 18 Vrms 4.0 Vrms 10 mA @ 240 Vrms 10 40 Parameters 4000Vrms 109 Ohms 8 pF -40ºC to 80ºC -40ºC to 125ºC Green LED 10 oz. (280g) Thermally Conductive Epoxy Box Clamp Type AWG # 10 (3mm) 5.0-6.0 in lb (0.6-0.7 Nm) 0.8 inch (20mm) MECHANICAL SPECIFICATIONS THERMAL DERATE INFORMATION AGENCY APPROVALS ANNEX - ENVIROMENTAL INFORMATION