xppower.com ISL Series • Single & Dual Regulated Outputs • 4:1 Input Range • SMD Package • Industry Standard Pinout • 1500 VDC Isolation • Short Circuit Protection • 3 Year Warranty Specification Input Voltage Input • 24 V: 40 VDC for 100 ms 48 V: 80 VDC for 100 ms 24 VDC Output Output Voltage • Minimum Load • Line Regulation • Load Regulation • Setpoint Accuracy • Ripple & Noise • Temperature Coefficient • Short Circuit Protection • See table 10%(1) ±0.2% typical ±0.5% typical ±1%/±3% typical, positive/negative output 100 mV pk-pk 20 MHz bandwidth 0.03%/°C Continuous, automatic recovery 48 VDC Model Number 3.3 V 455 mA 72% ISL2403A 5.0 V 300 mA 76% ISL2405A 9.0 V 167 mA 78% ISL2409A 12.0 V 125 mA 79% ISL2412A 15.0 V 100 mA 80% ISL2415A ±5.0 V ±150 mA 74% ISL2405 ±12.0 V ±63 mA 78% ISL2412 ±15.0 V ±50 mA 80% ISL2415 5.0 V 300 mA 76% ISL4805A 12.0 V 125 mA 79% ISL4812A 15.0 V 100 mA 80% ISL4815A ±5.0 V ±150 mA 74% ISL4805 ±12.0 V ±63 mA 78% ISL4812 ±15.0 V ±50 mA 80% ISL4815 Mechanical Details General See table 1500 VDC 109 Ω 1000 pF typical 550 kHz typical at nominal input, full load >1 MHrs to MIL-HDBK-217F at 25 º C, GB Environmental Operating Temperature • -40 °C to +85 °C, derate from 100% load at 70 °C to 0% load at 100 °C Storage Temperature • -55 °C to +125 °C Case Temperature • 100 °C max Cooling • Convection-cooled Lead Temperature • 240 º C, 0.06 in (1.5 mm) from case, 10 s Side View A 0.51 (13.10) 0.12 (3.04) 0.54 (13.70) • • • • • • 0.31 (8.00) 0.29 (7.50) 0.94 (23.86) 0.713 (18.10) Efficiency Isolation Voltage Isolation Resistance Isolation Capacitance Switching Frequency MTBF Efficiency (typ) 0.01 (0.25) Input Reverse Voltage Protection Input Surge • 24 V (9-36 VDC) 48 V (18-72 VDC) • None Output Current 0.10 (2.54) 16 A 10 9 0.02 (0.50) Input Voltage Range Output Voltage Top View 1 78 5 º max 0.05 (1.35) 0.60 (15.24) Recommended footprint Top view grid: 0.1 x 0.1 in (2.54 x 2.54 mm) 16 10 9 1 7 8 0.079 (2.00) Notes 1. Operation at no load will not damage unit but it may not meet all specifications. 0.039 (1.00) Pin 1 7 8 9 10 16 Single -Vin N.C. N.C. +Vo 0V +Vin Dual -Vin N.C. 0V +Vo -Vo +Vin N.C. Not connected Notes 1. All dimensions in inches (mm) 2. Tolerance: ±0.010 (±0.25) 3. Weight: 0.011 lbs (5.2 g) 4. Pin tolerance: ±0.004 (±0.10 mm) 15-May-14 DCDC 1.5 Watts