NV2M Operation condition NV2M Insulation Resistance 100M Dielectric Strength Between contacts Between contact and coil 50Hz 500V 50Hz 500V Item 7 of IEC 61810-5 Item 6 of IEC 61810-5 Item 6 of IEC 61810-5 Functional 300m/s2 Survival 450 m/s2 Shock resistance 18.2 17.4(9.2) 13.8 (Q Type)22.8 22.3 20.4 min (at 500VDC) IEC68-2-27 Test Ea 2 10~100Hz 100 m/s Double amplitude 1.5mm 5N 235 2 3 0.5s -40~85 85% (at 40 ) 15g(Q type ); 10g ;5g(1C) Vibration resistance2 Features Small size, light weight. Low coil power consumption. Switching capacity up to 20A. PC board mounting. Suitable for automobile, automation system, electronic equipment, instrument, meter, telecommunication facilities and remote control facilities. Terminals strength Solderability Ambient Temperature Relative Humidity Mass IEC68-2-6 Test Fc IEC68-2-21 Test Ua1 IEC68-2-20 Test Ta method 1 IEC68-2-3 Test Ca Dimensions 1C 3-0.4 0.016 0.035 2A DPSTNO , 2C DPDT(B-M) ; 1A(SPSTNO) 1C(SPDT(B-M)) AgSnO2 AgNi NO:20A/14VDC NC:15A/14VDC 280W 40VDC Max. Switching Current:20A 100m or 30mV at 10A max make time 15s Item 4.12 of IEC 61810-7 1.6 0.063 3 6- 1.3 2 4- 0.9 6 1 0.035 11.25 0.2 0.443 0.008 18 18 18 180 240 260 6.9 6.9 6.9 1 1 1 0.8 0.6 0.56 3 3 3 Release Time ms 1.2 1.2 1.2 2 0.079 4-0.4 0.4 0.016 0.016 11.3 0.445 22.3max. 0.878max. 22.8max. 0.898max. 6- 1.3 0.051 4- 0.3 0.012 (Quiet Type) 2.Pickup and release voltage are for test purposes only and are not to be used as design criteria. 3.Unless otherwise stated, the rated coil voltage specified in coil parameter table shall be used for all tests and its application to the relay. Sound Pre. Characteristics (Q type) Operation noise <50db Coil voltage :12VDC 5 3.8 0.150 10 9 3 8 2 7 6 1 6-0.9 0.9 0.016 0.035 CAUTION: 1.The use of any coil voltage less than the rated coil voltage will compromise the operation of the relay. 4 9.5 0.374 16.9 0.665 Max. Coil power consumption W Operate Time ms 3.8 0.150 Coil resistance 10% Release voltage VDC(min) (9% of rated voltage) 18.8 0.740 22.8 0898 3.2 0.126 12 12 12 4 7 0.3 0.012 012-800 012-600 012-560 2.2 0.087 4-? 0.55 0.022 3.2 0.126 Coil voltage VDC Rated 5 (Standard Type) Pick up voltage VDC(max) (58%of rated voltage) 1.5 0.059 Dash numbers 0.4 6-0.4 0.016 0.035 Coil Parameter 10 8 2.5 0.1 0.098 0.039 Item 4.30 of IEC 61810-7 Item 4.31 of IEC 61810-7 9 0.051 0.008 2 10 107 2C 0.157 Electrical Mechanical 5 18.2max. 2C 1 3.75 0.1 0.148 0.039 0.717max. 13.8max. 0.543max. Contact Resistance or Voltage drop 2.2 0.087 2-? 0.55 0.022 17.4max. 0.685max. 2 2- 0.9 0.035 5 0.1 0.197 0.039 Contact Data Contact Arrangement Contact Material Contact Rating (resistive) Max. Switching Power Max. Switching Voltage Operation life 3 3- 1.3 0.051 13.75 0.2 0.541 0.008 1C 0.008 4 Enclosure S: Sealed type Z: Dust cover 5 Coil rated voltage(V) DC:12 6 Coil power consumption 0.56:0.56W 0.6:0.6W 0.8: 0.8W 0.4 0.016 6 4 0.157 5 0.016 4 4 3 1 Part number NV2M 2 Noise NIL: Standard;Q: Quiet 3 Contact arrangement:2A:2A 2C:2C 1C:1C;1A:1A 3.75 0.148 5 4 18.2max. 0.717max. 13.8max. 0.543max. 2 9.2max. 0.362max. 0.6 20.4Max. 0.803max. 1 DC12V 1.6 0.063 NV2M Q 2C Z mm /inch 13.75 0.2 0.541 0.008 Ordering Information Mounting (Bottom view) Dimensions 5 4 9 3 8 3 2 1 7 6 2 1 1C 10 5 1 4 4 3 8 9 6 2C 2 (Standard Type) Wiring diagram(Bottom view) 5 10 7 (Quiet Type) NOTES 1).Dimensions are in millimeters. 2).Inch equivalents are given for general information only. 129 Ningbo Huaguan Electronics Corporation LTD. 130