1N4942 thru 1N4948 VOIDLESS-HERMETICALLY SEALED FAST RECOVERY GLASS RECTIFIERS SCOTTSDALE DIVISION APPEARANCE This “fast recovery” rectifier diode series is military qualified to MIL-PRF-19500/359 and is ideal for high-reliability applications where a failure cannot be tolerated. These industry-recognized 1.0 Amp rated rectifiers for working peak reverse voltages from 200 to 1000 volts are hermetically sealed with voidless-glass construction using an internal “Category I” metallurgical bond. These devices are similar in ratings to the 1N5615 thru 1N5623 series where surface mount MELF package configurations are also available by adding a “US” suffix (see separate data sheet for 1N5615US thru 1N5623US). Microsemi also offers numerous other rectifier products to meet higher and lower current ratings with various recovery time speed requirements including fast and ultrafast device types in both through-hole and surface mount packages. “A” Package IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com FEATURES WWW . Microsemi .C OM DESCRIPTION APPLICATIONS / BENEFITS • • • • • • • • • Popular JEDEC registered 1N4942 to 1N4948 series Voidless hermetically sealed glass package Triple-Layer Passivation Internal “Category I” Metallurgical bonds Working Peak Reverse Voltage 200 to 1000 Volts. JAN, JANTX, and JANTXV available per MIL-PRF19500/359 (for JANS, see 1N5615 thru 1N5623) • Surface mount equivalents also available in a square end-cap MELF configuration with “US” suffix (see separate data sheet for 1N5615US thru 1N5623US) • • • • • Fast recovery 1 Amp rectifiers 200 to 1000 V Military and other high-reliability applications General rectifier applications including bridges, halfbridges, catch diodes, etc. High forward surge current capability Extremely robust construction Low thermal resistance Controlled avalanche with peak reverse power capability Inherently radiation hard as described in Microsemi MicroNote 050 MAXIMUM RATINGS MECHANICAL AND PACKAGING o o • Junction & Storage Temperature: -65 C to +175 C • Thermal Resistance: 38oC/W junction to lead at 3/8 inch (10 mm) lead length from body • Thermal Impedance: 4.5oC/W @ 10 ms heating time • Average Rectified Forward Current (IO): 1.0 Amps @ TA = 55ºC and 0.750 Amps at TA = 100ºC • Forward Surge Current: 15 Amps @ 8.3 ms half-sine • Solder Temperatures: 260ºC for 10 s (maximum) • • • • • • • CASE: Hermetically sealed voidless hard glass with Tungsten slugs TERMINATIONS: Axial leads are copper with Tin/Lead (Sn/Pb) finish MARKING: Body paint and part number, etc. POLARITY: Cathode band TAPE & REEL option: Standard per EIA-296 WEIGHT: 340 mg See package dimensions on last page ELECTRICAL CHARACTERISTICS JAN1N4942 JAN1N4944 JAN1N4946 JAN1N4947 JAN1N4948 200 400 600 800 1000 220 440 660 880 1100 NOTE 1: TA = 100oC, 8.3 ms surges Copyright 2004 12-08-2004 REV A AVERAGE RECTIFIED CURRENT MAXIMUM FORWARD VOLTAGE MAXIMUM REVERSE CURRENT IO AMPS o o 55 C 100 C 1.00 .750 1.00 .750 1.00 .750 1.00 .750 1.00 .750 VF @ 1 A VOLTS IR @ VRWM µA o o 25 C 150 C 1.0 200 1.0 200 1.0 200 1.0 200 1.0 200 1.3 1.3 1.3 1.3 1.3 pF MAXIMUM SURGE CURRENT (NOTE 1) IFSM AMPS MAXIMUM REVERSE RECOVERY (NOTE 2) trr ns 45 35 25 20 15 15 15 15 15 15 150 150 250 250 500 Maximum CAPACITANCE C @ -12V NOTE 2: IF = 0.5A, IRM = 1A, IR(REC) = .250A Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 1 1N4942 thru 1N4948 TYPE WORKING MINIMUM PEAK BREAKDOWN REVERSE VOLTAGE VOLTAGE BV @ 50µA VRWM VOLTS VOLTS 1N4942 thru 1N4948 SCOTTSDALE DIVISION VBR VRWM VF IR C trr SYMBOLS & DEFINITIONS Definition Minimum Breakdown Voltage: The minimum voltage the device will exhibit at a specified current. Working Peak Reverse Voltage: The maximum peak voltage that can be applied over the operating temperature range. Maximum Forward Voltage: The maximum forward voltage the device will exhibit at a specified current. Maximum Leakage Current: The maximum leakage current that will flow at the specified voltage and temperature. Capacitance: The capacitance of the TVS as defined @ 12 volts at a frequency of 1 MHz and stated in picofarads. Reverse Recovery Time: The time interval between the instant the current passes through zero when changing from the forward direction to the reverse direction and a specified recovery decay point after a peak reverse current is reached. WWW . Microsemi .C OM Symbol VOIDLESS-HERMETICALLY SEALED FAST RECOVERY GLASS RECTIFIERS PACKAGE DIMENSIONS NOTE: Lead diameter tolerance = +0.003/-0.004 inches 1N4942 thru 1N4948 Copyright 2004 12-08-2004 REV A Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 2