Astec AEE00BB12-4 10 watt Datasheet

10 Watts
AEE00-12Vin
Total Power:
Input Voltages:
No. of Outputs:
10 Watts
12V
Single and Dual
Electrical Specs
Input
Input range
9 to 18 VDC
Efficiency
78% typical (3.3V)
Output
Special Features
•
•
•
•
•
•
10 W, Dual output
2:1 Input range
1.0" x 2.0" x 0.33 case
Industry standard package
Low Profile
Low Cost
Voltage tolerance
Overall regulation
Noise/ripple
Transient response
±1.0%
±1% max
1% Typ, 2% Max
300 usec typical (50% step load
change to within 3%Vo)
Temperature Regulation
±0.02 %Vo/°C
Switching frequency
330kHz
Isolation
I/O isolation
1500 VDC Input to Output
1000 VDC Input to Case
1000 VDC Output to Case
Isolation Resistance
300 Mohms
Environmental
Operating base temperature range:
-25°C to +100°C
Storage temperature: -40°C to +125°C
MTBF: 3 Million Hours (Belcore TR332)
Safety
1
UL
UL1950 Recognition
CSA
CSA22.2-950 Recognition
TUV
EN60950 Recognition
North America (USA): 1-888-41-ASTEC
Europe (UK): 44 (1384) 842-211Asia (HK): 852-2437-9662
AMERICAS
EUROPE
ASIA
5810 Van Allen Way
Carlsbad, CA 92008
Telephone: 760-930-4600
Facsimile: 760-930-0698
Astec House, Waterfront Business Park
Merry Hill, Dudley
West Midlands, DY5 1LX, UK
Telephone: 44 (1384) 842-211
Facsimile: 44 (1384) 843-355
Units 2111-2116, Level 21
Tower1, Metroplaza
223, Hing Fong Road
Fwai Fong, New Territories
Hong Kong
Telephone: 852-2437-9662
Facsimile: 852-2402-4426
Ordering Information
Input
Voltage
Output
Voltage
Efficiency
Model Number
9-18 V
9-18 V
9-18 V
9-18 V
3.3V @ 2.55 A
5.0V @ 2 A
12V @ 0.84 A
15V @ 0.68 A
78%
81%
83%
84%
AEE02F12-49
AEE02A12-49
AEE00B12-49
AEE00C12-49
9-18 V
9-18 V
9-18 V
±5V @ ± 1.0 A
±12V @ ±0.42 A
±15V @ ±0.33 A
81%
83%
84%
AEE01AA12-4
AEE00BB12-4
AEE00CC12-4
NOTES:
Enable Function
1. With the control pin floating (no connection), the unit is enabled and there is an output of 5V.
2. With the control pin Low (short to -Vin), the unit is enabled and there is an output of 5V.
3. With the control pin connected to an external logic signal (5V), the unit is disabled and there is no output.
Trim Feature
“9” at end of Model Number designates Trim option.
Mechanical Dimensions and Pin Assignments
Notes:
1. 20 MHz bandwidth. An external 0.1 uf ceramic capacitor
is recommended to be placed from +V out to comm.
2. All specifications are typical at nominal line, full load,
and 25°C unless otherwise noted.
3. All specifications subject to change without notice.
4. Mechanical drawings are for reference only.
www.astecpower.com
2
Similar pages