July 17, 2007 SHIELDED SMD INDUCTOR DR350-5 SERIES Features z z z z z Low Profile Surface Mount Design Flat Top for Pick and Place Inductance Range from 10.0µH to 1500.0µH Operating Temp. -40°C to +85°C Tinned Leads with Leaded Solder is Available (note 7) ELECTRICAL SPECIFICATIONS AT 25ºC Inductance (µH) ± 20% 10.0 15.0 22.0 33.0 47.0 68.0 100.0 150.0 220.0 330.0 470.0 680.0 1000.0 1500.0 Part No. DR350-5-103 DR350-5-153 DR350-5-223 DR350-5-333 DR350-5-473 DR350-5-683 DR350-5-104 DR350-5-154 DR350-5-224 DR350-5-334 DR350-5-474 DR350-5-684 DR350-5-105 DR350-5-155 DCR (Ω) ± 20% 0.036 0.047 0.059 0.082 0.100 0.140 0.200 0.350 0.470 0.680 1.030 1.600 2.800 3.400 I rms (A) Max. 2.50 2.20 1.90 1.70 1.50 1.30 1.10 0.81 0.70 0.58 0.47 0.38 0.29 0.26 I sat (A) Max. 3.00 2.40 2.10 1.60 1.40 1.20 1.00 0.79 0.65 0.54 0.47 0.38 0.32 0.22 MECHANICAL OUTLINES 10.0 0.3 4.5 0.3 6.0 3.0 10.0 0.3 1 XXX TOP VIEW 2 SIDE VIEW BOTTOM VIEW 1 2.5 3.2 2.5 5.6 PCB PAD LAYOUT (REF.) 2 SCHEMATIC Notes: 1. All dimensions are shown in millimeter “mm” 2. General tolerance ±0.2mm, unless other specified 3. Inductance Test: 1kHz, 0.5Vrms 4. Irms for an approximate 45°C temperature rise 5. Isat for an approximate 20% drop maximum of the nominal value 6. Tape and reel quantity, 750 pcs/reel 7. For non-RoHS parts replace DR prefix with 42- (e.g. DR350-5 becomes 42-350-5) 8. Terminal finish is compliant to RoHS requirements. Solder in accordance with J-STD-020C. DATATRONIC: 28151Highway 74, Romoland, CA 92585 Tel: 951-928-7700 Toll Free Tel: 888-889-5391 Fax: 951-928-7701 Email: [email protected] 499 King’s Road, Hong KongTel: (852) 2562 3858, (852) 2564 8477 Fax: (852) 2565 7214, (852) 2563 1290 All specifications are subject to change without notice.