05008 DLZ-5 thru DLZ-30CA STANDARD CAPACITANCE TVS ARRAY APPLICATIONS ✔ ✔ ✔ ✔ Military & Aerospace Data Line Protection RS-232 & RS-423 Data Lines Microprocessor Based Equipment Multiple Data & Power Bus Line Protection IEC COMPATIBILITY (EN61000-4) ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-4 (EFT): 40A - 5/50ns ✔ 61000-4-5 (Surge): 24A, 8/20µs Level 2 (Line-Ground) & Level 3 (Line-Line) 16 PIN CERAMIC FEATURES ✔ MIL-STD-461 Compatible ✔ Protects I/O Devices ✔ Satisfies Military NEMP Requirements ✔ 1300 Watts Peak Pulse Power per Line (tp=8/20µs) ✔ Unidirectional & Bidirectional Configurations ✔ ESD Protection > 40 kilovolts ✔ Internal Common Ground ✔ Available in Multiple Voltage Types: 5.0V to 30.0V ✔ Multiple TVS Array: Protects up to 15 Lines MECHANICAL CHARACTERISTICS ✔ Ceramic 16 Pin Hermetically Sealed Package ✔ Weight 3.2 grams (Approximate) ✔ Flammability Rating UL 94V-0 ✔ Marking: Logo, Part Number, Date Code & Pin One Defined By Flag on Lead ✔ Screening Available Upon Request - The DLZ series can be screened upon request for military requirements in accordance with MIL-PRF-19500 (applicable test). Standard screening is available based on the following options: H1 - 100% screening per test plans 05227 & 05229 H2 - 100% screening per test plans 05228 & 05230 ✔ Screening to DESC Drawing #94029 (Bidirectional) & #94030 (Unidirectional) is also available PIN CONFIGURATIONS UNIDIRECTIONAL 05008.R7 2/07 BIDIRECTIONAL 16 15 14 13 12 11 10 9 16 15 14 13 12 11 10 9 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 www.protekdevices.com DLZ-5 thru DLZ-30CA DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified PARAMETER SYMBOL VALUE UNITS PPP 1300 Watts °C Peak Pulse Power (tp = 8/20µs) - See Figure 1 Operating Temperature Storage Temperature Forward Surge Rating (1/20 seconds) - Unidirectional Only TL -55 to 150 TSTG -55 to 150 °C IF 10 Amps ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE MAXIMUM CLAMPING VOLTAGE (See Fig. 2) MAXIMUM CLAMPING VOLTAGE (See Fig. 2) V WM VOLTS @ 1mA V(BR) VOLTS @ IP = 1A VC VOLTS @8/20µs VC @ IPP DLZ-5 DLZ-5A DLZ-12 DLZ-12A DLZ-17 DLZ-17A DLZ-24 DLZ-24A DLZ-30 DLZ-30A 5.0 5.0 12.0 12.0 17.0 17.0 24.0 24.0 30.0 30.0 6.0 6.0 13.3 13.3 19.2 19.2 26.7 26.7 33.3 33.3 10.2 9.5 21.1 19.1 30.4 27.5 42.3 38.3 52.8 47.8 19.2V 18.1V 33.0V 28.0V 40.0V 37.4V 62.4V 50.5V 62.9V 60.0V @ @ @ @ @ @ @ @ @ @ DLZ-8C DLZ-13C DLZ-13CA DLZ-19C DLZ-19CA DLZ-30C DLZ-30CA 8.0 13.0 13.0 19.0 19.0 30.0 30.0 8.5 14.4 14.4 21.6 21.6 33.3 33.3 13.4 22.8 20.6 34.2 31.0 52.8 47.8 29.0V 34.0V 31.0V 47.6V 40.5V 68.7V 62.5V @ @ @ @ @ @ @ PART NUMBER (See Note 1) MAXIMUM LEAKAGE CURRENT MAXIMUM CAPACITANCE TEMPERATURE COEFFICIENT OF V(BR) @VWM ID µA 0V @ 1 MHz C pF qV(BR) mV/°C 66A 70A 41A 48A 33A 35A 21A 26A 21A 24A 200 200 2 2 2 2 2 2 2 2 880 880 440 440 330 330 275 275 220 220 5 5 18 18 20 20 31 31 39 39 45A 39A 43A 28A 33A 19A 21A 10 4 4 4 4 4 4 440 385 385 275 275 165 165 9 18 18 24 24 39 39 Note 1: Part numbers with a “C” suffix are bidirectional devices, i.e., DLZ-8C. 05008.R7 2/07 2 www.protekdevices.com DLZ-5 thru DLZ-30CA GRAPHS FIGURE 1 PEAK PULSE POWER VS PULSE TIME PPP - Peak Pulse Power - Watts 100,000 10,000 1300W 8/20µs Waveform 1,000 100 0.1 10 100 td - Pulse Duration - µs 10,000 FIGURE 3 POWER DERATING CURVE 100 TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs Peak Value IPP 80 e-t 60 40 td = t I /2 PP 20 Peak Pulse Power 8/20µs 80 % Of Rated Power tf 100 60 40 20 Average Power 0 0 0 05008.R7 2/07 1,000 FIGURE 2 PULSE WAVE FORM 120 IPP - Peak Pulse Current - % of IPP 1 5 10 15 t - Time - µs 20 25 0 30 3 25 50 75 100 125 TL - Lead Temperature - °C 150 www.protekdevices.com DLZ-5 thru DLZ-30CA 16 PIN CERAMIC PACKAGE OUTLINE & DIMENSIONS PACKAGE OUTLINE 16 PIN CERAMIC DIP C A DIMENSIONS D B A B C D E F G H I Pin 1 Pin 1 Index E G I DIM F MILLIMETERS MIN MAX 22.72 11.43 7.36 4.19 2.42 0.33 0.88 23.48 12.19 4.87 7.84 2.66 0.57 1.12 INCHES MIN MAX 0.895 0.450 0.310 0.025 REF 0.165 0.095 0.023 0.035 0.925 0.480 0.192 0.290 - REF 0.105 0.013 0.045 NOTES: H 1. Dimensions are exclusive of metal burrs and solder protusions. 2. Package sealed with ceramic or metal lid. Outline & Dimensions: Rev 0 - 3/02, 06029 COPYRIGHT © ProTek Devices 2007 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. 05008.R7 2/07 4 ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: [email protected] Web Site: www.protekdevices.com www.protekdevices.com