MBR(F,B)2035CT thru MBR(F,B)2060CT TO-220AB FEATURES • Guardring for overvoltage protection ITO-220AB • Lower power losses, high efficiency • Low forward voltage drop • High forward surge capability 2 3 1 1 MBR20xxCT PIN 1 PIN 2 PIN 3 CASE 2 3 MBRF20xxCT PIN 1 PIN 2 • High frequency operation • Meets MSL level 1, per J-STD-020, LF maximum peak of 245 °C (for TO-263AB package) • Solder dip 260 °C, 40 s (for TO-220AB and ITO-220AB package) PIN 3 TO-263AB K • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS 2 For use in low voltage, high frequency rectifier of switching mode power supplies, freewheeling diodes, dc-to-dc converters or polarity protection application. 1 MBRB20xxCT K PIN 1 HEATSINK PIN 2 MECHANICAL DATA Case: TO-220AB, ITO-220AB, TO-263AB Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test, HE3 suffix for high reliability grade (AEC Q101 qualified), meets JESD 201 class 2 whisker test Polarity: As marked Mounting Torque: 10 in-lbs maximum PRIMARY CHARACTERISTICS IF(AV) 10 A x 2 VRRM 35 V to 60 V IFSM 150 A VF 0.57 V, 0.70 V TJ max. 150 °C MAXIMUM RATINGS (TC = 25 °C unless otherwise noted) PARAMETER SYMBOL MBR2035CT MBR2045CT MBR2050CT MBR2060CT UNIT Maximum repetitive peak reverse voltage VRRM 35 45 50 60 V Working peak reverse voltage VRWM 35 45 50 60 V Maximum DC blocking voltage VDC 35 45 50 60 V Maximum average forward rectified current at TC = 135 °C total device per diode IF(AV) 20 10 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load per diode IFSM 150 A Peak repetitive reverse surge current per diode at tp = 2 µs, 1 kHz IRRM Voltage rate of change (rated VR) dV/dt 10 000 V/µs Operating junction temperature range 1.0 0.5 A TJ - 65 to + 150 °C Storage temperature range TSTG - 65 to + 175 °C Isolation voltage (ITO-220AB only) from terminal to heatsink t = 1 min VAC 1500 V www.kersemi.com 1 MBR(F,B)2035CT thru MBR(F,B)2060CT ELECTRICAL CHARACTERISTICS (TC = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS Maximum instantaneous forward voltage per diode (1) IF = 10 A IF = 10 A IF = 20 A IF = 20 A Maximum reverse current per diode at rated DC blocking voltage per diode (1) TC = 25 °C TC = 125 °C TC = 25 °C TC = 125 °C TC = 25 °C TC = 125 °C SYMBOL MBR2035CT MBR2045CT MBR2050CT MBR2060CT UNIT VF 0.65 0.57 0.84 0.72 0.80 0.70 0.95 0.85 V IR 0.1 15 0.15 15 mA Note: (1) Pulse test: 300 µs pulse width, 1 % duty cycle THERMAL CHARACTERISTICS (TC = 25 °C unless otherwise noted) PARAMETER SYMBOL MBR MBRF MBRB UNIT RθJC 2.0 5.0 2.0 °C/W Typical resistance from junction to case per diode ORDERING INFORMATION (Example) PACKAGE UNIT WEIGHT (g) PACKAGE CODE BASE QUANTITY DELIVERY MODE TO-220AB MBR2045CT-E3/45 PREFERRED P/N 1.85 45 50/tube Tube ITO-220AB MBRF2045CT-E3/45 1.99 45 50/tube Tube TO-263AB MBRB2045CT-E3/45 1.35 45 50/tube Tube TO-263AB MBRB2045CT-E3/81 1.35 81 800/reel Tape reel TO-220AB MBR2045CTHE3/45 (1) 1.85 45 50/tube Tube ITO-220AB MBRF2045CTHE3/45 (1) 1.99 45 50/tube Tube TO-263AB MBRB2045CTHE3/45 (1) 1.35 45 50/tube Tube TO-263AB MBRB2045CTHE3/81 (1) 1.35 81 800/reel Tape reel Note: (1) Automotive grade AEC Q101 qualified RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 20 160 Peak Forward Surge Current (A) Average Forward Current (A) Resistive or Inductive Load 16 12 8 4 TJ = TJ Max. 8.3 ms Single Half Sine-Wave 140 120 100 80 60 40 0 50 0 100 150 1 10 100 Case Temperature (°C) Number of Cycles at 60 Hz Figure 1. Forward Derating Curve (Total) Figure 2. Maximum Non-Repetitive Peak Forward Surge Current Per Diode www.kersemi.com 2 MBR(F,B)2035CT thru MBR(F,B)2060CT 10 000 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p TJ = 150 °C 10 Junction Capacitance (pF) Instantaneous Forward Current (A) 100 Pulse Width = 300 µs 1 % Duty Cycle 1.0 TJ = 25 °C 0.1 1000 MBR2035CT - MBR2045CT MBR2050CT & MBR2060CT MBR2035CT - MBR2045CT MBR2050CT & MBR2060CT 0.01 100 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1 0.1 10 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Figure 3. Typical Instantaneous Forward Characteristics Per Diode Figure 5. Typical Junction Capacitance Per Diode 100 Transient Thermal Impedance (°C/W) Instantaneous Reverse Current (mA) 100 MBR2035CT - MBR2045CT MBR2050CT & MBR2060CT 10 TJ = 125 °C 1 0.1 TJ = 75 °C 0.01 TJ = 25 °C 0.001 0 20 40 60 80 100 10 1 0.1 0.01 0.1 1 10 100 Percent of Rated Peak Reverse Voltage (%) t - Pulse Duration (s) Figure 4. Typical Reverse Characteristics Per Diode Figure 6. Typical Transient Thermal Impedance Per Diode www.kersemi.com 3 MBR(F,B)2035CT thru MBR(F,B)2060CT PACKAGE OUTLINE DIMENSIONS in inches (millimeters) TO-220AB ITO-220AB 0.370 (9.40) 0.360 (9.14) 0.185 (4.70) 0.175 (4.44) 0.154 (3.91) 0.148 (3.74) PIN 2 3 0.160 (4.06) 0.140 (3.56) 0.350 (8.89) 0.330 (8.38) 1.148 (29.16) 1.118 (28.40) 0.105 (2.67) 0.095 (2.41) 0.104 (2.65) 0.096 (2.45) 2 7° REF. 0.350 (8.89) 0.330 (8.38) 3 0.191 (4.85) 0.171 (4.35) 0.560 (14.22) 0.530 (13.46) 0.035 (0.89) 0.025 (0.64) 0.025 (0.64) 0.015 (0.38) 0.105 (2.67) 0.095 (2.41) 0.022 (0.56) 0.014 (0.36) 0.110 (2.79) 0.100 (2.54) 0.057 (1.45) 0.045 (1.14) 0.057 (1.45) 0.045 (1.14) 0.035 (0.90) 0.028 (0.70) 0.028 (0.71) 0.020 (0.51) 0.205 (5.21) 0.195 (4.95) TO-263AB 0.411 (10.45) 0.380 (9.65) 0.190 (4.83) 0.160 (4.06) 0.245 (6.22) MIN. 0.055 (1.40) 0.045 (1.14) Mounting Pad Layout 0.42 (10.66) MIN. K 0.360 (9.14) 0.320 (8.13) 1 K 2 0.624 (15.85) 0.591 (15.00) www.kersemi.com 4 0.055 (1.40) 0.047 (1.19) 0 to 0.01 (0 to 0.254) 0.110 (2.79) 0.090 (2.29) 0.021 (0.53) 0.014 (0.36) 0.037 (0.940) 0.027 (0.686) 0.105 (2.67) 0.095 (2.41) 0.135 (3.43) DIA. 0.122 (3.08) DIA. 7° REF. 0.560 (14.22) 0.530 (13.46) 0.205 (5.20) 0.195 (4.95) 0.671 (17.04) 0.651 (16.54) PIN 1 0.110 (2.79) 0.100 (2.54) 0.057 (1.45) 0.045 (1.14) 0.140 (3.56) DIA. 0.125 (3.17) DIA. 0.600 (15.24) 0.580 (14.73) 0.603 (15.32) 0.573 (14.55) 7° REF. 0.076 (1.93) REF. 45° REF. 0.145 (3.68) 0.135 (3.43) 0.635 (16.13) 0.625 (15.87) 0.110 (2.79) 0.100 (2.54) 0.076 (1.93) REF. 0.055 (1.39) 0.045 (1.14) 0.113 (2.87) 0.103 (2.62) 1 0.190 (4.83) 0.170 (4.32) 0.404 (10.26) 0.384 (9.75) 0.415 (10.54) MAX. 0.205 (5.20) 0.195 (4.95) 0.140 (3.56) 0.110 (2.79) 0.33 (8.38) MIN. 0.670 (17.02) 0.591 (15.00) 0.15 (3.81) MIN. 0.08 (2.032) MIN. 0.105 (2.67) 0.095 (2.41)