SIPAT Co.,Ltd www.sipatsaw.com China Electronics Technology Group Corporation No.26 Research Institute LBN14017 SAW Filter Electrical Characteristic Specifications Parameter Unit Minimum Typical Maximum Center Frequency MHz 139.8 140 140.20 Insertion Loss dB 21.05 24 1 dB Bandwidth MHz 9.3 9.84 3 dB Bandwidth MHz 10 10.4 40dB Bandwidth MHz 12.57 13.0 50dB Bandwidth MHz 12.83 13.30 Passband variation dB 0.6 0.7 Phase Linearity degrees 3.4 7 Group Delay variation nsec 23 150 Absolute Delay usec 2 Ultimate Rejection dB 50 60 YZ LiNbO3 Substrate Material Ambient Temperature °C 25 DIP2212 Package Size (22.1x12.7x5.2mm3) Typical Performance Package Outline Matching Configuration Source/Load Impedance=50 ohm Notes - Component values may change depending on board layout. P.O. Box 2513 Chongqing, China 400060 Tel:+86-23-62920684 Fax:62805284 E-mail: [email protected]