T-1-3/4, Right-Angle LED Assembly G626XB Series (with standoff) The G626XB series of right-angle indicators is made of a single unit with standoff for PCB cleaning. This series is available with leads cut to 4 mm as standard. The maximum array is 6 positions. By substituting the numeral 1 through 5 you may tailor the number of lamps in the array for your application. 37.95 9.0 6.35 4.8 6.1 4.0 G626B Red or yellow Anode Green Anode + – (Pinout for single color) (typ for bi-color) Specify part desired as follows: G6264B/Order Code1 + Order Code 2 + Order Code 3 + Order Code 4 For example: “G6264B/I+3G” designates an assembly with 1 red LED on the left and 3 green LEDs to the right in an array with four lamps. ORDER CODE AND INFORMATION (ALL RATINGS AT 25°C AMBIENT) LED Lamp Epoxy & Type TInted Diffused Resistor Required Tinted Transparent High Brightness Tinted Diffused For 2mA Operation Typical Characteristics Color Order Code Red H Vf (V) Iv (mcd) 2Θ1/2 λ (nm) @If=20mA @If=10mA (Deg) Recom. Op. If (mA) 697 2.1 2.0 36 5-10 Hi Eff Red I 635 2.0 9.0 36 10-20 Green G 565 2.1 9.0 36 10-20 Yellow Y 585 2.0 7.0 36 10-20 Hi Eff Red IT 635 2.0 30 16 10-20 Green GT 565 2.1 30 16 10-20 Yellow YT 585 2.0 28 16 10-20 Red H2 697 2.0 1.6 @ 2mA 36 2-10 Hi Eff Red I2 635 2.1 2.0 @ 2mA 36 2-10 Green G2 565 2.0 2.0 @ 2mA 36 2-10 Yellow Y2 585 2.0 2.0 @ 2mA 36 2-10 2.5/2.5 54 10-20 Tinted Diffused 5V Operation Not available in this series. Tinted Diffused 12V Operation Hi Eff Red/Grn White Diffused Bipolar, Bicolor Peak EG 635/565 2.1/2.0 Yellow/Green YG 585/565 2.1/2.0 2.5/2.5 54 10-20 Red/Green SG 660/570 1.8/2.2 6.0/2.5 - 10-20 * Specifications subject to change without notice. Dimensions are in mm±0.25 unless stated otherwise. IDEA, Inc., 1351 Titan Way, Brea, CA 92821 Ph:714-525-3302, 800-LED-IDEA; Fax: 714-525-3304 Catalog 995A A-30