MIC-5602 Advanced Mezzanine Card Intel® Core™ 2 Duo Processor AMC Features Supports Intel® Core™ 2 Duo processor Low Voltage and Ultra Low Voltage Intel® 3100 chipset 400/533 MHz FSB Up to 2 GB DDRII 400 MHz SDRAM with ECC One Gigabit Ethernet (RJ-45), one USB 2.0 port, and one console port (mini-USB) to front panel AMC connector routes dual Gigabit Ethernet SerDes (x2), SATA (x2), USB (x2), dual PCIe x4, or single PCIe x8 Boot from network, CompactFlash, SATA, USB or onboard flash disk Supports IPMI v1.5 and Serial-over-LAN function AMC.0, AMC.1, AMC.2 and AMC.3 compliant RoHS COMPLIANT 2002/95/EC Introduction The MIC-5602 is a highly integrated single-width, mid-size, processor AMC. Its design is based on the low-power, high-performance Intel® Core™2 Duo LV and ULV processors combined with the high-performance Intel 3100 chipset. The board includes 1 or 2 GB of soldered DDR2 400 MHz memory with ECC for higher MTBF and optimum cooling. To facilitate development, test and integration while offering typical network connectivity once deployed, the front panel provides a gigabit Ethernet connector, a serial port and a USB 2.0 host port. The MIC-5602 maximizes AMC edge connector connectivity for the best design flexibility. When redundancy or two separate interconnects are required, the board can be configured with two PCI Express x4 ports or with a single PCI Express x8 port when throughput is essential. Two gigabit Ethernet ports provide AMC.2 compliance and offer control and data plane connectivity to facilitate the migration of existing applications. Both ports connect to the 3100 chipset via PCI Express for maximum data throughput. Dual SATA interfaces provide AMC.3–compliant storage and two USB ports offer further connectivity opportunities. A dedicated Module Management Controller (MMC) monitors onboard conditions and manages hot swap operation for field upgrades or module replacement without the need to power down the underlying system. Specifications Processor System CPU Chipset BIOS Bus Memory Ethernet Mass Storage SATA Interface Serial Interface USB Interface Watchdog Timer Hardware Monitor Firmware Operating System Form Factor Miscellaneous Power Requirement Front Side Bus PCI Express Technology Max. Capacity Controller Interface CompactFlash Onboard AMC edge connector Other I/O I/O AMC edge connector Controller Source Code Update Standard Compatibility AMC Interface LEDs Configuration Consumption Intel® Core™ 2 Duo ULV (U7500) and LV (L7400) up to 1.5 GHz Intel 3100 AMI (1. Dual images with update rollback, 2. CMOS settings can be changed over IPMI, and 3. CMOS backup works without battery) 400/533 MHz PCI Express rev1.0a : one x8 and two x4 routed to AMC connector DDRII 400 with ECC 2 GB Intel 82571EB dual-port Gigabit Ethernet controller (support 802.3d compliant link aggregation) One GbE accessible on front panel via RJ-45 and two SerDes links to AMC common options region ports 0 and 1 Optional expansion board with CF type-1 socket 1GB industrial grade internal flash disk (used as NV storage, emergency boot disk or diagnostics boot media) Two SATA interfaces to common ports region 2-3 One SATA routed to CF daughter board Routed to front panel as USB Slave interface through onboard USB to Serial converter One USB 2.0 compliant host port (standard USB Connector) on front panel Two USB 2.0 ports connect to rear AMC edge connector AMC compliant watchdog IPMI v1.5 compatible MMC Pigeon Point System-based HPM.1 compliant Carrier Grade Linux (Wind River Platform for Network Equipment, Linux Edition 2.0) Mid-size, single width AMC.0 compliant x1 blue for hot swap, x1 red/amber for failure and OOS, x1 green for general purpose Core™2 Duo L7400 + 3100 + 1 GB on-board DDRII SDRAM 38.5 watts MIC-5602 Block Diagram COM2 Core2 Duo LV or ULV 1GB Flash Disk FSB DDR PLL IPMB-L MMC (optional expansion Module) USB1 SATA21 DDR2 DRAM LPC c c r SATA to PATA Converter CF Disk AMC Con FWH TPM (optional) Intel 3100 USB2 & USB3 Mini USB Con. USB-Serial Converter USB Con. USB0 Port 16 SATA 0 & SATA1 COM1 IICH Ports 2,3 One PCIe x8 or two PCIe x4 IMCH PCIe x4 Dual GbE Ports 4..11 SERDES RJ45 w/ X’mr FrontPanel Clock Generator Physical Environment Regulatory Compliance Dimensions Temperature Humidity Vibration (5 ~ 500 Hz) Shock Altitude Conformance NEBS Level 3 Standards DC/DC Converter 180.6 mm x 73.5 mm Operating Non-operating -5 ~ 55° C (23 ~ 122° F) -40 ~ 70° C (-40 ~ 140° F) IEC60068-2-78 (95%RH @ 40° C) IEC60068-2-6 ( 0.002G2/Hz, 1Grms) IEC60068-2-27 (10G, 11ms) 300 m below sea level to 4,000 m above sea level 10,000 above sea level UL94V0, FCC Class B, CE, RoHS & WEEE Ready Designed for GR-63-CORE and GR-1089-CORE PICMG AMC.0, AMC.1, AMC.2, AMC.3, IPMI v1.5, HPM.1 Ordering Information Model Number On-Board Option CPU Memory Core 2 Duo LV 1.5 GHz (L7400) 1 GB DDR2 with ECC Core 2 Duo LV 1.5 GHz (L7400) 2 GB DDR2 with ECC Core 2 Duo ULV 1.06 GHz (U7500) 1 GB DDR2 with ECC Core 2 Duo ULV 1.06 GHz (U7500) 2 GB DDR2 with ECC MIC-5602A-M1E MIC-5602A-M2E MIC-5602B-M1E MIC-5602B-M2E Notes: 1. TPM support will be available as an option. 2. Full size front panel design will be available upon request. 3. CF module available as an option. 4. Low cost Celeron M ULV 1.06 GHz (423) on request. 5. MIC-5602A-M2E and MIC-5602B-M2E builds will depend on the availability of the 2 GB DDR2 SDRAM from the memory manufacturers. Check with your local Advantech sales for further information. Online Download www.advantech.com/products Ports 0,1