ACPL-227 / ACPL-247 DC Input Multi-Channel Half-Pitch Phototransistor Optocoupler Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxE denotes a lead-free product Description Features The ACPL-227 is a DC-input dual channel half-pitch phototransistor optocoupler which contains two light emitting diodes optically coupled to two separate phototransistors. It is packaged in an 8-pin SO package. x Current transfer ratio (CTR: 50% (min) at IF = 5mA, VCE = 5V) Likewise, the ACPL-247 is a DC-input quad channel halfpitch phototransistor optocoupler which contains four light emitting diodes optically coupled to four separate phototransistors. It is packaged in a 16-pin SO package. x SO package For both devices, the input-output isolation voltage is rated at 3,000 Vrms. Response time, tr, is 2μs typically, while minimum CTR is 50% at input current of 5 mA. ACPL-227 pin layout ACPL-247 pin layout x High input-output isolation voltage (VISO = 3,000VRMS) x Non-saturated Response time (tr: 2μs (typ) at VCC = 10V, IC = 2mA, RL= 100:) x CMR 10kV/μs (typical) x Safety and regulatory approvals - cUL - IEC/EN/DIN EN 60747-5-2 x Options available: – CTR Ranks 0, B & C for ACPL-227 and Rank 0 only for ACPL-247 Applications x I/O Interface for Programmable controllers, computers. x Sequence controllers Pin 1, 3 Anode Pin 1, 3, 5, 7 Anode Pin 2, 4 Cathode Pin 2, 4, 6, 8 Cathode Pin 5, 7 Emitter Pin 9,11,13,15 Emitter Pin 6, 8 Collector Pin 10,12,14,16 Collector x System appliances, measuring instruments x Signal transmission between circuits of different potentials and impedances. Ordering Information ACPL-2x7-xxxx is UL recognized at 3,000 Vrms for 1 minute per UL1577 and Canadian Component Acceptance Notice #5. RoHS Compliant Option Part number ACPL-227 ACPL-247 Rank ‘0’ 50% <CTR< 600% IF=5mA VCE=5V Rank ‘0’ 100% <CTR< 600% IF=5mA VCE=5V Rank ‘B’ 130% <CTR< 260% IF=5mA VCE=5V Rank ‘C’ 200% <CTR< 400% IF=5mA VCE=5V -500E -50BE -50CE SO-8 Dual X X -560E -56BE -56CE SO-8 Dual X X -500E SO-16 Quad X X -560E SO-16 Quad X X No. Of Package Channels Surface Tape & IEC/EN/DIN EN Mount Reel 60747-5-2 Quantity 2000 pcs per reel X 2000 pcs per reel 2000 pcs per reel X 2000 pcs per reel To order, choose a part number from the part number column and combine with the desired option from the option column to form an order entry. Example 1: ACPL-227-56CE to order product of Dual Channel SO-8 Surface Mount package in Tape & Reel with IEC/EN/DIN EN 60747-5-2 Safety Approval, 200%<CTR<400% and RoHS compliant. Example 2: ACPL-247-500E to order product of Quad Channel SO-16 Surface Mount package in Tape and Reel packaging with 100%<CTR<600% and RoHS compliant. Option datasheets are available. Contact your Avago sales representative or authorized distributor for information. 2 Package Outline Drawings ACPL-227 PACKAGE OUTLINE 1.27 ±0.25 0.050 ±0.010 LEAD FREE VDE option only 0.75 0.030 A227V YYWWA 2.00 ±0.20 0.079 ±0.008 5.20 ±0.30 0.205 ±0.012 0.20 ±0.05 0.008 ±0.002 RANK 0.75 0.030 5.30±0.3 [0.208 ±0.012] 0.12 ±0.10 0.005 ±0.004 PIN ONE 4.40 ±0.20 0.173 ±0.008 DATE CODE 0.7 ±0.2 [0.028 ±0.008] 0.40 ±0.10 0.016 ±0.004 7.00 ±0.40 0.276 ±0.016 DIMENSIONS IN MILLIMETERS [INCHES] ACPL-247 PACKAGE OUTLINE 1.27 ±0.25 0.050 ±0.010 LEAD FREE VDE option only A247V YYWWA 0.75 0.030 0.75 0.030 RANK 5.30 ±0.3 [0.208 ±0.012] 2.00 ±0.20 0.079 ±0.008 0.12 ±0.10 0.005 ±0.004 10.28 ±0.30 0.405 ±0.012 0.40 ±0.10 0.016 ±0.004 DIMENSIONS IN MILLIMETERS[INCHES] 3 0.7±0.2 [0.028 ±0.008] 7.00 ±0.40 0.276 ±0.016 0.20 ±0.05 0.008 ±0.002 PIN ONE 4.40 ±0.20 0.173 ±0.008 DATE CODE Solder Reflow Temperature Profile Recommended reflow condition as per JEDEC Standard, J-STD-020 (latest revision). Non-Halide Flux should be used. Absolute Maximum Ratings Parameter Symbol Storage Temperature TS -55~125 qC Operating Temperature TA -55~110 qC Average Forward Current IF(AVG) 50 mA Pulse Forward Current IFSM 1 A Reverse Voltage VR 6 V LED Power Dissipation (1 channel) PI 65 mW Collector Current IC 50 mA Collector-Emitter Voltage VCEO 80 V Emitter-Collector Voltage VECO 7 V Isolation Voltage (AC for 1min, R.H. 40~60%) VISO 3,000 Collector Power Dissipation (1 channel) PC 150 100 mW Total Power Dissipation PTOT 200 170 mW Lead Solder Temperature 4 ACPL-227 ACPL-247 Units VRMS 260°C for 10 seconds Note 1min Electrical Specifications (DC) Over recommended ambient temperature at 25qC unless otherwise specified. Parameter Symbol Min. Typ. Max. Units Test Conditions Note Forward Voltage VF - 1.2 1.4 V IF = 20mA Fig.6 Reverse Current IR - - 10 PA VR = 5V Terminal Capacitance Ct - 30 - pF V = 0, f = 1MHz Collector Dark Current ICEO - - 100 nA VCE = 48V, IF = 0 mA Collector-Emitter Breakdown Voltage BVCEO 80 - - V IC = 0.5 mA, IF = 0 mA Emitter-Collector Breakdown Voltage BVECO 7 - - V IE = 100 PA, IF = 0 mA Current Transfer Ratio (ACPL-227 Only) CTR 50 - 600 % IF = 5 mA, VCE = 5V CTR=(IC/IF )* 100% Current Transfer Ratio (ACPL-247 Only) CTR 100 - 600 % IF = 5 mA, VCE = 5V CTR=(IC/IF )* 100% Saturated CTR CTR(sat) - 60 - % IF=1mA, VCE = 0.4V Collector-Emitter Saturation Voltage VCE(sat) - - 0.4 V IF = 8mA, IC = 2.4mA Isolation Resistance Riso 5x1010 1x1011 - : DC500V, R.H. 40~60% Floating Capacitance CF - 0.6 1 pF V = 0, f = 1MHz Cut-off Frequency (-3dB) FC - 80 - kHz VCC = 5V, IC = 2 mA, RL = 100: Fig. 2,19 Response Time (Rise) tr - 2 - Ps Fig. 1 Response Time (Fall) tf - 3 - Ps VCC = 10V, IC = 2 mA, RL = 100: Turn-on Time ton - 3 - Ps Turn-off Time toff - 3 - Ps Turn-ON Time tON - 2 - Ps Fig. 1, 17 Storage Time TS - 25 - Ps VCC = 5V, IF = 16 mA, RL = 1.9k: Turn-OFF Time tOFF - 40 - Ps Common Mode Rejection Voltage CMR - 10 - kV/Ps Ta=25ºC, RL=470:, VCM=1.5kV(peak), IF=0mA, VCC=9V, Vnp=100mV Fig.20 ,) 5/ 9 && 9 &( ,) WU 9 &( WV WRQ Figure 1. Switching Time Test Circuit 5 WI W R II Fig.14 5/ Fig.12 9 && 2 XWSXW 5' Figure 2. Frequency Response Test Circuit $&3/ $&3/ &ROOHFWRU3RZHU'LVVLSDWLRQ3F P: )RUZDUG&XUUHQW,) P$ $PELHQW7HPSHUDWXUH7D & Figure 4. Collector Power Dissipation vs. Ambient Temperature 3XOVHZLGWKȝV 7D & )RUZDUG&XUUHQW,) P$ 3HDN)RUZDUG&XUUHQW,)3 P$ & & 7D & )RUZDUG9ROWDJH9) 9 Figure 5. Pulse Forward Current vs. Duty Cycle Ratio )RUZDUGYROWDJHWHPSHUDWXUHFRHIIFLHQW '9)'7D P9& Figure 6. Forward Current vs. Forward Voltage 3XOVH)RUZDUG&XUUHQW,)3 P$ )RUZDUGFXUUHQW,) )RUZDUGFXUUHQW, ) P$ P$ Figure 7. Forward Voltage Temperature Coefficient vs. Forward Current 6 & & & 'XW\5DWLR $&3/ $PELHQW7HPSHUDWXUH7D & Figure 3. Forward Current vs. Ambient Temperature. $&3/ 3XOVH:LGWKȝV 5HSHWLWLYH )UHTXHQF\ +] 7D & 3XOVH)RUZDUG9ROWDJH9)3 9 Figure 8. Pulse Forward Current vs. Pulse Forward Voltage P$ P$ &ROOHFWRU&XUUUHQW,F P$ &ROOHFWRU&XUUHQW,F P$ 7D & P$ 3& PD[ P: $&3/ 3& PD[ P: $&3/ P$ ,) P$ P$ P$ P$ P$ P$ &ROOHFWRU(PLWWHU9ROWDJH9&( 9 &ROOHFWRU(PLWWHU9ROWDJH9&( 9 ,) P$ Figure 10. Collector Current vs. Small Collector-Emitter Voltage Figure 9. Collector Current vs. Collector-Emitter Voltage &ROOHFWRU&XUUHQW,& $ &ROOHFWRU'DUN&XUUHQW,&(2 $ 9 9 9&( 9 )RUZDUG&XUUHQW,) $ Figure 11. Collector Current vs. Forward Current ( ( 9&( 9 9 9 9 ( $PELHQW7HPSHUDWXUH7D & Figure 12. Collector Dark Current vs. Ambient Temperature &ROOHFWRU(PLWWHU6DWXUDWLRQ9ROWDJH 9&( VDW 9 &XUUHQW7UDQVIHU5DWLR&75 9 9&( 9 ,) P$ ,& P$ ,) P$ ,& P$ ,) P$ ,& P$ )RUZDUG&XUUHQW,) $ Figure 13. Current Transfer Ratio vs. Forward Current 7 9 $PELHQW7HPSHUDWXUH7D & Figure 14. Collector-Emitter Saturation Voltage vs. Ambient Temperature P$ P$ P$ ,) P$ $PELHQW7HPSHUDWXUH7D R& 6ZLWFKLQJWLPHW ȝV W6 W21 ,) P$ 9&& 9 5 N / $PELHQW7HPSHUDWXUH7D & Figure 17. Switching Time vs. Ambient Temperature &ROOHFWRU(PLWWHU6DWXUDWLRQ9ROWDJH9&( VDW 9 W2)) 76 W 21 7D & 9&& 9 5/ N /RDG5HVLVWDQFH5/ N Figure 16. Switching Time vs. Load Resistance Figure 15. Collector Current vs. Ambient Temperature W 2)) 7D & P$ P$ P$ P$ P$ ,& P$ 6ZLWFKLQJ7LPHW ȝV &ROOHFWRU&XUUHQW,& P$ P$ )RUZDUG&XUUHQW,) P$ Figure 18. Collector-Emitter Saturation Voltage vs. Forward Current 5/ G9GW 9R G% 5/ N 9R 9FF 9 9&0 9FF 9 ,& P$ 7D & +LJK9ROWDJH3XOVH )UHTXHQF\I N+] Figure 19. Frequency Response For product information and a complete list of distributors, please go to our web site: Figure 20. CMR Test Circuit www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright © 2005-2010 Avago Technologies. All rights reserved. AV02-0752EN - July 20, 2010 9 &0 9QS 9R 9FS 9FS§ G9GW [&I[5/ 9FS9ROWDJHWKDWLVJHQHUDWHGE\WKH GLVSODFHPHQWFXUUHQWLQIORDWLQJ FDSDFLWDQFHEHWZHHQSULPDU\DQG VHFRQGDU\VLGHV