FR1601A thru FR1607A Pb FR1601A thru FR1607A Pb Free Plating Product 16.0 Ampere Heatsink Dual Common Anode Fast Recovery Rectifiers Features Fast switching for high efficiency Low forward voltage drop High current capability Low reverse leakage current High surge current capability TO-220AB Unit : inch (mm) .624(15.87) .177(4.5)MAX Automotive Inverters/Solar Inverters Plating Power Supply,SMPS and UPS Car Audio Amplifiers and Sound Device Systems .038(0.96) .019(0.50) Mechanical Data Case: Heatsink TO-220AB Epoxy: UL 94V-0 rate flame retardant Terminals: Solderable per MIL-STD-202 method 208 Polarity: As marked on diode body Mounting position: Any Weight: 2.2 gram approxiamtely .50(12.7)MIN Application .1(2.54) .548(13.93) .054(1.39) .045(1.15) .269(6.85) .196(5.00) .163(4.16) .139(3.55) MIN .226(5.75) .419(10.66) .387(9.85) .025(0.65)MAX .1(2.54) Case Case Case Negative Positive Common Cathode Common Anode Suffix "CT" Suffix "A" Doubler Tandem Polarity Suffix "D" Case Series Tandem Polarity Suffix "S" Maximum Ratings and Electrical Characteristics Ratings at 25℃ ambient temperature unless otherwise specified. Single phase, half wave, 60HZ, resistive or inductive load. For capacitive load, derate current by 20%. Symbols FR1601A FR1602A FR1603A FR1604A FR1605A FR1606A FR1607A Maximum Recurrent Peak Reverse Voltage VRRM 50 Maximum RMS Voltage VRMS Maximum DC Blocking Voltage VDC Maximum Average Forward Rectified Current See Fig. 2 100 200 400 600 800 35 70 140 280 420 50 100 200 400 600 Units 1000 Volts 560 700 Volts 800 1000 Volts I(AV) 16.0 Amp IFSM 150 Amp VF 1.3 Volts Peak Forward Surge Current, 8.3ms single half-sine-wave superimposed on rated load (JEDEC method) Maximum Forward Voltage at 8.0A DC and 25℃ Maximum Reverse Current at TC=25℃ at Rated DC Blocking Voltage TC=125℃ 5.0 IR Typical Thermal Resistance (Note 1) RθJC Maximum Reverse Recovery Time (Note 2) TRR Operating and Storage Temperature Range TJ，Tstg uAmp 100 ℃/W 1.5 150 250 -55 to +150 500 nS ℃ NOTES: 1- Thermal Resistance from Junction to Case per Leg Mounted on Heatsink. 2- Reverse Recovery Test Conditions：IF=.5A，IR=1A，IRR=.25A. Rev.07C © 2006 Thinki Semiconductor Co., Ltd. Page 1/2 http://www.thinkisemi.com/ FR1601A thru FR1607A RATINGS AND CHARACTERISTIC CURVES Rev.07C © 2006 Thinki Semiconductor Co., Ltd. Page 2/2 http://www.thinkisemi.com/